AP Physics C: Mechanics · Unit 6 · 10-15% of the exam · about 80 minutes
Unit 6: Energy and Momentum of Rotating Systems
By the end: Use rotational kinetic energy, work done by torques, angular momentum and angular impulse to solve problems about spinning, rolling, colliding and orbiting objects, and justify which conservation law applies and why.

- 6.1 Rotational kinetic energy · 8 min
The energy of spinning
- Rotational kinetic energy: $K_{rot} = \tfrac12 I\omega^2$, from $K = \int\tfrac12 v^2\,dm$ with $v = r\omega$. Use $\omega$ in rad/s.
- For the same mass and size, the object with more mass far from the axis (larger I) stores more energy at the same ω.
- A rigid object that moves and spins: $K = \tfrac12 Mv_{cm}^2 + \tfrac12 I_{cm}\omega^2$.
- 6.1 Energy conservation with rotation · 9 min
Where the energy goes when things spin
- Energy conservation with rotation: include $\tfrac12 I\omega^2$ for every spinning part, and use $U = Mgy_{cm}$ for extended objects.
- A string that doesn't slip ties the motions together: $v = R\omega$.
- For an object on a fixed pivot, $K = \tfrac12 I_{pivot}\omega^2$ covers all of its kinetic energy.
- 6.2 Torque and work · 8 min
Work done while turning
- $dW = \tau\,d\theta$, so $W = \int\tau\,d\theta$: the area under a $\tau(\theta)$ graph, with θ in radians.
- Only the tangential part of a force does work on a rotating object. A radial force does none.
- Rotational work-energy theorem: $W_{net} = \Delta\left(\tfrac12 I\omega^2\right)$.
- 6.3 Angular momentum of a particle · 7 min
Angular momentum without spinning
- Particle: $\vec L = \vec r\times\vec p$, size $L = mvr\sin\phi = mvd$, with d the perpendicular distance from the point to the line of motion.
- In components: $L_z = m(xv_y - yv_x)$. Positive is counterclockwise (out of the page).
- Straight-line motion at constant velocity: L is constant. Moving straight at the point: L = 0.
- 6.3 Angular momentum and angular impulse · 8 min
Torque changes angular momentum
- Rigid object about a fixed axis: $L = I\omega$, in kg·m²/s.
- $\Sigma\tau_{ext} = \frac{dL}{dt}$. Internal torques cancel. It reduces to $\Sigma\tau = I\alpha$ when I is constant.
- Angular impulse: $\int\tau\,dt = \Delta L$, the area under a $\tau(t)$ graph.
- 6.4 Conservation of angular momentum · 9 min
Pull in, spin faster
- Zero net external torque about an axis: angular momentum about that axis is conserved, even if forces act.
- Changing shape: $I_i\omega_i = I_f\omega_f$. Smaller I, faster spin.
- $K = \frac{L^2}{2I}$: when L is conserved, K can still change. Internal forces (muscles) can do work.
- 6.4 Collisions with rotating objects · 9 min
When a lump of putty hits a rod
- Collisions with a pivoted object: conserve L about the pivot. The pivot force has no torque about the pivot, but it does change linear momentum.
- After sticking, add the stuck object's rotational inertia (m times distance squared).
- Collision stage: angular momentum. Swing stage afterward: energy. Two stages, two laws.
- 6.5 Rolling without slipping · 10 min
Spinning and moving at once
- Rolling without slipping: $v_{cm} = R\omega$ and $a_{cm} = R\alpha$. The contact point is at rest; the top moves at $2v_{cm}$.
- $K = \tfrac12 Mv_{cm}^2 + \tfrac12 I_{cm}\omega^2 = \tfrac12 Mv_{cm}^2(1 + \beta)$, with $\beta = \frac{I_{cm}}{MR^2}$.
- From rest down a height h: $v = \sqrt{\frac{2gh}{1 + \beta}}$. Only shape matters. Sphere beats disk beats shell beats hoop.
- 6.5 Rolling with forces, and slipping · 10 min
Why it rolls, and what happens when it skids
- Rolling down an incline: $Mg\sin\theta - f_s = Ma$ and $f_sR = I_{cm}\alpha$, with $a = R\alpha$. Result: $a = \frac{g\sin\theta}{1 + \beta}$.
- Friction needed: $f_s = \beta Ma$. Rolling without slipping needs $\mu_s \ge \frac{\beta}{1 + \beta}\tan\theta$.
- Slipping: kinetic friction opposes the sliding of the contact point, does work, and pushes v and Rω together until rolling starts.
- 6.6 Motion of orbiting satellites · 10 min
Angular momentum and energy in orbit
- Gravity is central, so a satellite's L about the planet's center is constant. At perigee and apogee: $v_pr_p = v_ar_a$.
- Mechanical energy $E = \tfrac12 mv^2 - \frac{GMm}{r}$ is constant. Use L and E together for two unknowns.
- Circular orbit: $v = \sqrt{\frac{GM}{r}}$, $T^2 = \frac{4\pi^2}{GM}r^3$, $E = -\frac{GMm}{2r} = -K$.
- Unit 6 wrap-up · 9 min
Put it together