6.5 Rolling without slippingSpinning and moving at once

Rolling without slipping means the point of the object touching the ground doesn't slide. Think of a tire leaving a perfect print, with no skid marks. In one full turn, the tire lays its whole circumference on the road, so the center moves forward $2\pi R$. More generally, when it turns through an angle $\theta$, the center moves $x = R\theta$. Differentiate: $v_{cm} = R\omega$, and again: $a_{cm} = R\alpha$. That is the rolling condition.
?Wait, why is arc length $R heta$?
Here's the clever way to see rolling. Every point on a rolling wheel has two motions added together: the whole wheel translating forward at $v_{cm}$, plus spinning around the center with rim speed $R\omega = v_{cm}$. At the top, the two add: $2v_{cm}$. At the center, only the translation: $v_{cm}$. At the bottom, they cancel: zero. The contact point is momentarily at rest.
I thought about it. Show me
Now the energy. A rolling object has both kinds of kinetic energy: $K = \tfrac12 Mv_{cm}^2 + \tfrac12 I_{cm}\omega^2$. Write $I_{cm} = \beta MR^2$, where β is a pure number set by the shape (1 for a hoop, 1/2 for a disk, 2/5 for a solid sphere). With $\omega = \frac{v_{cm}}{R}$: $K = \tfrac12 Mv_{cm}^2 + \tfrac12\beta MR^2\frac{v_{cm}^2}{R^2} = \tfrac12 Mv_{cm}^2(1 + \beta)$.
?Wait, why doesn't friction take energy away from a rolling object?
Roll from rest down a height h: $Mgh = \tfrac12 Mv^2(1 + \beta)$, so $v = \sqrt{\frac{2gh}{1 + \beta}}$. Mass cancels and radius cancels. Only the shape factor β is left. The smaller β is, the less energy gets tied up in spinning, and the faster the object goes. So the race order is fixed: solid sphere, then solid disk, then hollow shell, then hoop.
| Shape | β = I/(MR²) | v at bottom, h = 1.0 m | Share of K in spin |
|---|---|---|---|
| Hoop or thin pipe | 1 | 3.13 m/s | 50% |
| Thin spherical shell | 2/3 | 3.43 m/s | 40% |
| Solid disk or cylinder | 1/2 | 3.61 m/s | 33% |
| Solid sphere | 2/5 | 3.74 m/s | 29% |
| Block sliding, no friction | 0 | 4.43 m/s | 0% |
- (a) Energy is conserved: static friction does no work. At the bottom: $K = \tfrac12 Mv^2(1 + \beta)$ with $\beta = \tfrac12$. At the top: $Mgh$.
Why?
State why energy is conserved here: rolling without slipping, so friction does no work. - $h = \frac{(1 + \beta)v^2}{2g} = \frac{(1.5)(3.0)^2}{2(9.8)} = 0.689\ \text{m}$.
- (b) The block has only translational energy: $h = \frac{v^2}{2g} = \frac{9.0}{19.6} = 0.459\ \text{m}$.
Why?
The cylinder goes higher at the same speed because it carries extra energy in its spin, and friction from the ramp converts that spin energy into height as it slows the rotation.
Answer: (a) About 0.69 m. (b) About 0.46 m.
Stuck? Get a hint
- Write the cylinder's total K with both terms, using $\omega = v/R$.
- For a solid cylinder, $K = \tfrac34 Mv^2$.
- Set $\tfrac34 Mv^2 = Mgh$ and solve for h.
I thought about it. Show me
- AThe 5.0 kg sphere, because it is heavier
- BThe 1.0 kg sphere, because it is larger
- CThey tie
- DThe 1.0 kg sphere, because it is lighter
Show the answer
C. $v = \sqrt{\frac{2gh}{1 + \beta}}$ and both have $\beta = \frac25$. Mass and radius cancel, so at every height they have the same speed and they tie. The top trap is the first choice: "heavier is faster" is a myth for rolling and for falling.
- Rolling without slipping: $v_{cm} = R\omega$ and $a_{cm} = R\alpha$. The contact point is at rest; the top moves at $2v_{cm}$.
- $K = \tfrac12 Mv_{cm}^2 + \tfrac12 I_{cm}\omega^2 = \tfrac12 Mv_{cm}^2(1 + \beta)$, with $\beta = \frac{I_{cm}}{MR^2}$.
- From rest down a height h: $v = \sqrt{\frac{2gh}{1 + \beta}}$. Only shape matters. Sphere beats disk beats shell beats hoop.
- Static friction does no work in rolling without slipping, so mechanical energy is conserved.