AP Physics C: Mechanics · Unit 6 lecture · Part 6 of 11 · 9 min

6.4 Conservation of angular momentumPull in, spin faster

Mr. Thompkins
Try this on a spinning office chair: hold two heavy books at arm's length, get someone to spin you gently, then pull the books to your chest. You speed up, and nobody pushed you. By the end of this section you'll be able to say exactly how much faster, and where the extra energy came from.

If the net external torque on a system about an axis is zero, then $\frac{dL}{dt} = 0$, and the system's angular momentum about that axis stays constant: $L_i = L_f$. Forces can still act. The axle can push, gravity can pull. What matters is that their torque about the axis is zero. For a system whose shape changes, this reads $I_i\omega_i = I_f\omega_f$.

?Wait, when was linear momentum conserved?
In Unit 4: when the net external force on a system is zero, its total momentum stays constant, whatever the internal forces do. Angular momentum works the same way with torque in place of force: zero net external torque about an axis means constant L about that axis.
A student on a spinning stool
A student sits on a stool that turns with negligible friction, holding a heavy dumbbell in each outstretched hand. The rotational inertia of the student, stool and dumbbells is 4.8 kg·m², and they spin at 1.5 rad/s. The student pulls the dumbbells in, and the rotational inertia drops to 1.6 kg·m². (a) Find the new angular speed. (b) Find the kinetic energy before and after. (c) Account for the difference.
  1. System: student, stool and dumbbells. The stool's bearing is frictionless and gravity's torque about the vertical axis is zero, so there is no external torque about the axis: $L$ is conserved.
    Why?
    The FRQ point is for naming the system and giving the reason: no external torque about the axis.
  2. (a) $I_i\omega_i = I_f\omega_f$: $\omega_f = \frac{(4.8)(1.5)}{1.6} = 4.5\ \text{rad/s}$.
  3. (b) $K_i = \tfrac12(4.8)(1.5)^2 = 5.4\ \text{J}$ and $K_f = \tfrac12(1.6)(4.5)^2 = 16.2\ \text{J}$.
    Why?
    Kinetic energy tripled while L stayed the same. Since $K = \frac{L^2}{2I}$, cutting I to a third with L fixed triples K.
  4. (c) The extra 10.8 J came from the student's muscles. To pull the dumbbells inward, the student had to exert a force toward the axis over a distance, and that force did positive work. Chemical energy in the student's body became kinetic energy.
    Why?
    Energy and angular momentum are separate laws. One can be conserved while the other is not.

Answer: (a) 4.5 rad/s. (b) 5.4 J before, 16.2 J after. (c) The student's arms did 10.8 J of work pulling the dumbbells in.

Stuck? Get a hint
  1. Is there any external torque about the vertical axis? If not, what is conserved?
  2. Set $I_i\omega_i = I_f\omega_f$ and solve for $\omega_f$.
  3. For energy, use $\tfrac12 I\omega^2$ before and after and compare.
L (kg·m²/s)7.2arms out7.2arms inK (J)5.4arms out16.2arms in
The stool problem in numbers. Angular momentum is the same before and after. Kinetic energy triples, paid for by the work the student's arms did.
?Wait, how did I write kinetic energy in terms of momentum?
From Unit 4, $K = \frac{p^2}{2m}$. The rotational version is $K = \frac{L^2}{2I}$. It's handy whenever L is conserved: the kinetic energy goes up exactly as much as I goes down, in proportion.

Angular momentum is a vector, and the whole vector is conserved. That gives one of the best demos in physics. A student sits still on a stool holding a bicycle wheel that spins with its axle vertical, angular momentum pointing up. Then she flips the wheel over. Now the wheel's angular momentum points down. The stool's bearing exerts no torque about the vertical axis, so the total vertical angular momentum must stay what it was. The only way: the student and stool start turning the other way, with twice the wheel's angular momentum, pointing up.

beforeafter the flipwheel +2.0stool: 0wheel −2.0stool +4.0total L = +2.0 up, before and after
Flipping a spinning wheel on a stool. In kg·m²/s: the wheel goes from +2.0 to −2.0, so the student and stool must pick up +4.0 to keep the total at +2.0.
Pause and think
In the wheel demo, the student flips the wheel back to its original orientation. What happens to the stool?
I thought about it. Show me
It stops. The wheel is back at +2.0 kg·m²/s, the total must still be +2.0, so the student and stool must end up with zero. To flip the wheel, her hands exert torques on it, and the wheel exerts equal and opposite torques on her. Those internal torques move angular momentum between the wheel and the stool without changing the total.
Pause and think
A figure skater spinning with her arms out pulls them in. Her angular momentum stays the same. Does her rotational kinetic energy stay the same too?
I thought about it. Show me
No, it increases. $K = \frac{L^2}{2I}$ with L fixed and I smaller means more K. The energy comes from the work her muscles do pulling her arms inward. When she extends her arms again, her kinetic energy drops back, and that energy goes into her muscles as heat.
Check yourself
A playground merry-go-round is a uniform disk of mass 120 kg and radius 1.5 m, turning at 1.2 rad/s with a 40 kg child standing at its center. The child walks out to the rim. Ignoring friction in the bearing, what is the new angular speed?
  1. A1.2 rad/s
  2. B0.72 rad/s
  3. C0.43 rad/s
  4. D2.0 rad/s
Show the answer

B. $I_i = \tfrac12(120)(1.5)^2 = 135\ \text{kg}\cdot\text{m}^2$ (the child at the center adds about nothing). $I_f = 135 + (40)(1.5)^2 = 225\ \text{kg}\cdot\text{m}^2$. So $\omega_f = \frac{(135)(1.2)}{225} = 0.72\ \text{rad/s}$. The 2.0 rad/s trap flipped the ratio: moving mass outward slows the spin.

Exam tip from Mr. T

For any conservation of angular momentum question, write one sentence before the math: "The net external torque on the [system] about [the axis] is zero, so angular momentum about that axis is conserved." Name the system and the axis. That sentence is usually worth a point by itself.

  • Zero net external torque about an axis: angular momentum about that axis is conserved, even if forces act.
  • Changing shape: $I_i\omega_i = I_f\omega_f$. Smaller I, faster spin.
  • $K = \frac{L^2}{2I}$: when L is conserved, K can still change. Internal forces (muscles) can do work.
  • L is a vector. Flipping a spinning wheel forces something else to turn the other way.