AP Physics C: Mechanics · Unit 6 lecture · Part 5 of 11 · 8 min

6.3 Angular momentum and angular impulseTorque changes angular momentum

Mr. Thompkins
In Unit 4, Newton's second law got its best form: $\Sigma F = \frac{dp}{dt}$. Unit 6 has the rotational twin, $\Sigma\tau = \frac{dL}{dt}$, and it's even more useful than $\Sigma\tau = I\alpha$, because it still works when an object changes shape.

For a rigid object turning about a fixed axis, add up the angular momentum of every piece. A piece of mass $m_i$ at distance $r_i$ moves in a circle at $v_i = r_i\omega$, so it contributes $m_i r_i v_i = m_i r_i^2\omega$. Add them all: $L = \left(\sum m_i r_i^2\right)\omega = I\omega$. That's the rotational version of $p = mv$, with units kg·m²/s. (This holds for the angular momentum along a fixed symmetry axis, which is every case in this course.)

?Wait, what is the impulse-momentum theorem?
From Unit 4: impulse is $\vec J = \int\vec F\,dt$, and it equals the change in momentum, $\vec J = \Delta\vec p$. On a graph of force against time, impulse is the area under the curve. A big force for a short time can give the same impulse as a small force for a long time.

Now differentiate a particle's angular momentum: $\frac{d\vec L}{dt} = \frac{d\vec r}{dt}\times\vec p + \vec r\times\frac{d\vec p}{dt} = \vec v\times m\vec v + \vec r\times\vec F$. The first term is zero, because any vector crossed with itself is zero. The second is the torque. So $\Sigma\vec\tau = \frac{d\vec L}{dt}$. For a whole system, the internal forces come in Newton's third law pairs that are equal, opposite and along the same line, so their torques cancel too. Only external torques can change a system's angular momentum: $\Sigma\vec\tau_{ext} = \frac{d\vec L}{dt}$.

Multiply by $dt$ and integrate, just as in Unit 4: the angular impulse is $\int\tau\,dt = \Delta L$. On a graph of torque against time, the angular impulse is the area under the curve. Its units are N·m·s, which are the same as kg·m²/s.

0123456012345t (s)τ (N·m)area = ΔL = 18 N·m·sτ = 3.0t − 0.50t²peak torque
A torque that rises and falls over 6.0 s. The shaded area is the angular impulse, 18 N·m·s, which is the change in the wheel's angular momentum.
Pause and think
Why is $\Sigma\tau = \frac{dL}{dt}$ more general than $\Sigma\tau = I\alpha$?
I thought about it. Show me
Because $L = I\omega$, and $\frac{dL}{dt} = I\frac{d\omega}{dt} + \omega\frac{dI}{dt}$. If $I$ is constant, the second term vanishes and you get $\Sigma\tau = I\alpha$. But a skater pulling in her arms or a star collapsing changes $I$, and then only $\Sigma\tau = \frac{dL}{dt}$ is right. With zero torque, $L$ stays fixed even while $\omega$ changes.
Angular impulse from a changing torque
A wheel with $I = 0.60\ \text{kg}\cdot\text{m}^2$ is spinning at 5.0 rad/s. A torque $\tau(t) = 3.0t - 0.50t^2$ (N·m, with t in s) is applied in the direction of its spin from $t = 0$ to $t = 6.0$ s. (a) Find the angular impulse. (b) Find the final angular speed. (c) At what time is the wheel's angular acceleration greatest?
  1. (a) $\Delta L = \int_0^{6.0}(3.0t - 0.50t^2)\,dt = \left[1.5t^2 - \frac{0.50t^3}{3}\right]_0^{6.0} = 54 - 36 = 18\ \text{N}\cdot\text{m}\cdot\text{s}$.
    Why?
    That is the shaded area in the graph. A definite integral with limits is how the exam wants you to show it.
  2. (b) Initial angular momentum: $L_i = I\omega_i = (0.60)(5.0) = 3.0\ \text{kg}\cdot\text{m}^2/\text{s}$. Final: $L_f = 3.0 + 18 = 21\ \text{kg}\cdot\text{m}^2/\text{s}$.
    Why?
    The torque acts in the direction of spin, so the impulse adds to L.
  3. $\omega_f = \frac{L_f}{I} = \frac{21}{0.60} = 35\ \text{rad/s}$.
  4. (c) $\alpha = \frac{\tau}{I}$, so α is greatest where τ is greatest. Set $\frac{d\tau}{dt} = 3.0 - 1.0t = 0$: $t = 3.0$ s, where $\tau = 4.5\ \text{N}\cdot\text{m}$ and $\alpha = \frac{4.5}{0.60} = 7.5\ \text{rad/s}^2$.
    Why?
    A maximum of a function is where its derivative is zero. Here I is constant, so the peak torque gives the peak α.

Answer: (a) 18 N·m·s. (b) 35 rad/s. (c) At t = 3.0 s.

Stuck? Get a hint
  1. Angular impulse is $\int\tau\,dt$ from 0 to 6.0 s.
  2. Add the impulse to $L_i = I\omega_i$, then divide by I.
  3. For (c), find where the torque function has zero slope.
?Wait, how do I integrate a polynomial again?
Use the power rule backward: $\int t^n\,dt = \frac{t^{n+1}}{n+1}$. So $\int 3.0t\,dt = 1.5t^2$ and $\int 0.50t^2\,dt = \frac{0.50t^3}{3}$. For a definite integral, evaluate at the top limit and subtract the value at the bottom limit.
Check yourself
A fan blade with rotational inertia 0.050 kg·m² is spinning at 120 rad/s when the power is cut. A constant friction torque of 0.30 N·m slows it down. How long does it take to stop?
  1. A2.5 s
  2. B20 s
  3. C400 s
  4. D0.13 s
Show the answer

B. Angular impulse equals the change in L: $\tau\,\Delta t = I\omega$, so $\Delta t = \frac{(0.050)(120)}{0.30} = 20\ \text{s}$. The 400 s trap divides ω by τ and forgets the rotational inertia.

  • Rigid object about a fixed axis: $L = I\omega$, in kg·m²/s.
  • $\Sigma\tau_{ext} = \frac{dL}{dt}$. Internal torques cancel. It reduces to $\Sigma\tau = I\alpha$ when I is constant.
  • Angular impulse: $\int\tau\,dt = \Delta L$, the area under a $\tau(t)$ graph.