AP Physics C: Mechanics · Unit 6 lecture · Part 11 of 11 · 9 min

Unit 6 wrap-upPut it together

Mr. Thompkins
You made it through the whole unit. Here's the good news: almost every Unit 6 problem starts with the same decision, which law to use. Make that decision well and the algebra is the easy part.
The situationReach forWhy it works
Something falls, swings or rolls through a heightEnergy, with ½Iω² for every spinning partOnly gravity does work (rolling friction does none)
Torque given as a function of angleW = ∫τ dθ, then W = ΔKArea under τ(θ) is work
Torque given as a function of time∫τ dt = ΔLArea under τ(t) is angular impulse
Object hits a pivoted or spinning thing, or I changesL conserved about the axisPivot force has no torque about the pivot
Acceleration or friction while rollingΣF = ma and Στ = Iα together, plus a = RαForces give a, torques give α
Skidding until it rollsForces and torques with kinetic frictionSlipping stops when v = Rω
Satellite at two points of one orbitL and E both conservedGravity is central and conservative
Which law for which situation. Most of the justification points in this unit come from saying why the law you chose applies.

Three threads run through the unit. First, the translation and rotation dictionary: $\tfrac12 mv^2 \to \tfrac12 I\omega^2$, $p = mv \to L = I\omega$, $F = \frac{dp}{dt} \to \tau = \frac{dL}{dt}$, $\int F\,dx \to \int\tau\,d\theta$, $\int F\,dt \to \int\tau\,dt$. Second, conservation laws need conditions: energy needs no nonconservative work (rolling friction does none, sticky collisions and skidding do plenty), and angular momentum needs no external torque about your chosen axis. Third, constraints tie the motions together: $v = R\omega$ for strings and rolling, and nothing ties them during slipping.

?Wait, how do I choose the axis for angular momentum?
Pick the point where an unknown force acts that you want to get rid of: the pivot in a rod collision, the axle of a turntable, the planet's center in an orbit. A force acting at the axis has zero lever arm, so its torque about that axis is zero.
?Wait, which of these quantities are vectors?
Angular velocity, angular momentum and torque are vectors along the rotation axis, with direction from the right-hand rule: curl your fingers the way it turns, and your thumb points along $\vec\omega$ and $\vec L$. Kinetic energy and work are scalars, with no direction. That is why flipping a spinning wheel changes L but not K.
Pause and think
Compare two situations. In the putty and rod collision, angular momentum is conserved but energy is not. For a ball rolling down a ramp, energy is conserved but the ball's angular momentum about its center is not. Explain both.
I thought about it. Show me
In the collision, the pivot exerts no torque about itself, so L about the pivot is conserved, but the sticking deforms the putty and turns kinetic energy into thermal energy. On the ramp, static friction does no work because the contact point is at rest, so energy is conserved. But friction exerts a torque about the ball's center, so the ball's angular momentum about its center keeps growing as it spins faster.

Traps that cost points

✕ Leaving out ½Iω² for a rolling object or a massive pulley.
✓ Every spinning part gets a rotational kinetic energy term.
✕ Using energy conservation in a sticky collision.
✓ Use angular momentum about the pivot for the collision, then energy for the swing.
✕ Conserving linear momentum when there is a pivot.
✓ The pivot pushes during the collision. It has no torque about itself, so conserve L about the pivot.
✕ Forgetting to add the stuck object's mr² after the collision.
✓ After sticking, I = $I_{rod}$ + m r².
✕ Using $v = R\omega$ while the object is slipping.
✓ v = Rω only for rolling without slipping. While skidding, find v(t) and ω(t) separately.
✕ Saying friction takes energy from a rolling object.
✓ Static friction at a contact point at rest does no work.
✕ Using the rod's end height instead of its center of mass height.
✓ $U = Mgy_{cm}$ for an extended object.
✕ Comparing two points of one ellipse with $v \propto 1/\sqrt r$.
✓ That is for different circular orbits. On one orbit, $v_pr_p = v_ar_a$.
✕ Plugging rev/min into formulas.
✓ Convert to rad/s first: multiply rev/s by 2π.

Key relationships for Unit 6

$K_{rot} = \tfrac12 I\omega^2$
Rotational kinetic energyAny spinning rigid object, ω in rad/s
$K = \tfrac12 Mv_{cm}^2 + \tfrac12 I_{cm}\omega^2$
Total kinetic energyObjects that move and spin, like rolling ones
$W = \int\tau\,d\theta,\quad P = \tau\omega$
Work and power of a torqueTorque as a function of angle
$\vec L = \vec r\times\vec p,\quad L = I\omega$
Angular momentumA particle (L = mvd) or a rigid object about a fixed axis
$\Sigma\tau = \frac{dL}{dt},\quad \int\tau\,dt = \Delta L$
Torque changes angular momentumTorque as a function of time
$I_i\omega_i = I_f\omega_f$
Conservation of angular momentumNo net external torque about the axis
$v_{cm} = R\omega,\quad a_{cm} = R\alpha$
Rolling without slippingRolling objects and strings that do not slip
$a = \frac{g\sin\theta}{1 + I/(MR^2)}$
Rolling down an inclineShape decides; mass and radius cancel
$v = \sqrt{\frac{GM}{r}},\quad E = -\frac{GMm}{2r}$
Circular orbitsSpeed, period and energy of a circular orbit
$v_{esc} = \sqrt{\frac{2GM}{r}}$
Escape speedTotal energy equal to zero

FRQ strategy for Unit 6

  1. Name the system and say which law applies and why: "no external torque about the pivot", "only gravity does work", "the contact point does not slip".
  2. Split multi-stage problems at the collision: angular momentum through the collision, energy before and after it.
  3. Write the law in symbols with every term before substituting. For derivations, start from a fundamental equation (energy conservation, L conservation, Newton's laws) and keep symbols to the end.
  4. For rolling with forces, write ΣF = Ma, Στ = Iα and a = Rα as three separate lines, then combine.
  5. On graphs, area under τ(θ) is work and area under τ(t) is angular impulse. Say which one you are using.
  6. For "explain" or "justify" parts, connect a claim to a physics principle in one or two sentences. Check limiting cases (a massless pulley, β = 0) to show your answer is reasonable.
  7. Unit 6 appears in all four free-response types: Mathematical Routines, Translation Between Representations, Experimental Design and Analysis, and Qualitative/Quantitative Translation.
Mixed FRQ practice: a yo-yo
A yo-yo is a uniform solid disk of mass 0.20 kg and radius 0.030 m, with a light string wrapped around its rim. You hold the string's end still, and the yo-yo is released from rest and unwinds as it falls. (a) Derive its acceleration in terms of g. (b) Find its speed after it falls 0.80 m, using energy. (c) Find its angular momentum about its center at that moment, and verify it with angular impulse.
  1. (a) Forces: gravity $mg$ down at the center, tension $T$ up at the rim. Newton: $mg - T = ma$. Torque about the center: $TR = I\alpha = \tfrac12 mR^2\frac{a}{R}$, so $T = \tfrac12 ma$.
    Why?
    The string unwinds without slipping, so the center moves $a = Ralpha$, exactly like rolling down the string.
  2. Combine: $mg - \tfrac12 ma = ma$, so $a = \tfrac23 g = 6.53\ \text{m/s}^2$, and $T = \tfrac13 mg = 0.653\ \text{N}$.
  3. (b) Energy: $mgh = \tfrac12 mv^2 + \tfrac12 I\omega^2 = \tfrac34 mv^2$, so $v = \sqrt{\frac{4gh}{3}} = \sqrt{\frac{4(9.8)(0.80)}{3}} = 3.23\ \text{m/s}$.
    Why?
    Check with kinematics: $v = \sqrt{2ah} = \sqrt{2(6.53)(0.80)} = 3.23$ m/s. Two methods, one answer.
  4. (c) $\omega = \frac{v}{R} = \frac{3.23}{0.030} = 108\ \text{rad/s}$, and $L = I\omega = \tfrac12(0.20)(0.030)^2(108) = 9.7 \times 10^{-3}\ \text{kg}\cdot\text{m}^2/\text{s}$.
  5. Verify: the only torque about the center is from tension, $\tau = TR = (0.653)(0.030) = 0.0196\ \text{N}\cdot\text{m}$, acting for $t = \frac{v}{a} = \frac{3.23}{6.53} = 0.495$ s. Angular impulse: $(0.0196)(0.495) = 9.7 \times 10^{-3}\ \text{N}\cdot\text{m}\cdot\text{s}$. It matches.
    Why?
    Three different laws (Newton, energy, angular impulse) all agree. When they do, you can trust the answer.

Answer: (a) $a = \tfrac23 g \approx 6.5\ \text{m/s}^2$. (b) About 3.2 m/s. (c) About $9.7 \times 10^{-3}\ \text{kg}\cdot\text{m}^2/\text{s}$, matching $\tau\,\Delta t$.

Stuck? Get a hint
  1. Draw the two forces on the yo-yo and where each acts.
  2. Write $mg - T = ma$ and $TR = \tfrac12 mR^2(a/R)$.
  3. For (c), $L = I\omega$; for the check, $\Delta L = \tau t$ with $\tau = TR$.
Check yourself
A solid sphere and a hoop, both rolling without slipping at the same speed on level ground, roll up the same hill. Which rises higher?
  1. AThe sphere, because it has less rotational inertia per mass
  2. BThe hoop, because it has more kinetic energy per kilogram at the same speed
  3. CThey rise to the same height, because they have the same speed
  4. DIt depends on their masses
Show the answer

B. At the same speed, $K = \tfrac12 Mv^2(1 + \beta)$, so per kilogram the hoop ($\beta = 1$) carries more energy than the sphere ($\beta = 0.4$), and $h = \frac{(1 + \beta)v^2}{2g}$. The first choice is a trap from the downhill race, where smaller β wins because it starts with the same energy, not the same speed.

Check yourself
A spinning space station is shaped like a wheel. Astronauts walk from the outer rim toward the center. With no external torque, what happens?
  1. AThe station spins faster and its kinetic energy increases
  2. BThe station spins faster and its kinetic energy stays the same
  3. CThe station spins slower and its kinetic energy decreases
  4. DNothing changes, because the astronauts are part of the system
Show the answer

A. Moving mass inward decreases I, so $\omega = \frac{L}{I}$ increases, and $K = \frac{L^2}{2I}$ increases too: the astronauts do work as they walk inward against the outward pull they feel. The last choice is a trap: internal motion can't change L, but it can change I and ω.

Mr. Thompkins
That's Unit 6. Go test it while it's fresh: take the Unit 6 quiz, and when you miss one, come back to that section and open its recall cards. Next up, Unit 7, where springs and pendulums swing back and forth, and calculus tells you exactly when they'll be where.