AP Physics 1 · Unit 5 · 10-15% of the exam · about 75 minutes

Unit 5: Torque and Rotational Dynamics

By the end: Describe spinning motion with angles, angular velocity and angular acceleration, calculate the torque a force produces, and use rotational inertia, equilibrium and the second law for rotation to predict how rigid objects balance, spin up and slow down.

Mr. Thompkins
  1. 5.1 Rotational kinematics · 8 min

    Motion in a circle, measured in angles

    • Angles in radians: θ = s/r, and one revolution is 2π rad.
    • Angular velocity ω = Δθ/Δt (rad/s). Angular acceleration α = Δω/Δt (rad/s²). Counterclockwise is usually positive.
    • With constant α, the three kinematics equations carry over with θ, ω and α.
  2. 5.1 Graphs of rotation · 7 min

    Slopes and areas, now spinning

    • ω-t graph: slope = α, area = Δθ.
    • θ-t graph: slope = ω. Curving up means speeding up; straight means steady spin; flat means at rest.
    • Check graph areas with the kinematics equations, and the other way around.
  3. 5.2 Connecting linear and rotational motion · 8 min

    Same spin, different speeds

    • $s = r\theta$, $v = r\omega$, $a_T = r\alpha$, with angles in radians.
    • On a rigid object, ω and α are the same everywhere; speed and tangential acceleration grow with r.
    • Tangential acceleration $r\alpha$ changes speed; centripetal acceleration $\omega^2r$ changes direction.
  4. 5.3 Torque · 8 min

    How hard a force twists

    • Torque $\tau = rF\sin\theta = r_\perp F$, in N·m. Only the perpendicular part of the force twists.
    • A force through the axis, or along the radius line, makes zero torque.
    • Lever arm: the perpendicular distance from the axis to the line of action of the force.
  5. 5.3 Adding torques · 7 min

    Force diagrams for objects that turn

    • Force diagram: draw the object, and start each arrow where that force acts.
    • Net torque: add each force's torque with its sign about one chosen axis.
    • A force through the axis (pivot, hinge, axle) makes zero torque about that axis.
  6. 5.4 Rotational inertia · 9 min

    Where the mass sits

    • $I = \Sigma mr^2$ for point masses (kg·m²). Mass far from the axis counts much more.
    • The same object has different I about different axes. I about the center of mass is the smallest.
    • Parallel axis theorem: $I = I_{cm} + Md^2$.
  7. 5.5 Rotational equilibrium and Newton's first law in rotational form · 8 min

    Balanced torques

    • Newton's first law for rotation: zero net torque means constant angular velocity.
    • Static equilibrium: ΣF = 0 and Στ = 0.
    • For balance, (weight × lever arm) on one side equals (weight × lever arm) on the other.
  8. 5.5 Static equilibrium of beams and signs · 10 min

    Pick the axis that kills an unknown

    • Static equilibrium: ΣF = 0 and Στ = 0 about any axis you choose.
    • Put the axis where an unknown force acts to remove it from the torque equation.
    • About to tip: the support on the far side pushes with zero force.
  9. 5.6 Newton's second law in rotational form · 8 min

    Net torque makes angular acceleration

    • $\alpha = \Sigma\tau / I$, with torques and I about the same axis.
    • Use the net torque: motor minus friction, with signs.
    • Same torque, larger I, smaller α: the ω-t line is less steep.
  10. 5.6 Pulleys with mass and linked systems · 9 min

    When the pulley fights back

    • Massive pulley: tensions on the two sides differ, and the difference provides the net torque.
    • Equations: ΣF = ma for each block, Στ = Iα for the pulley, a = Rα to link them.
    • A disk pulley acts like an extra ½M of mass to be accelerated.
  11. Unit 5 wrap-up · 8 min

    Put it together