AP Physics 1 · Unit 5 lecture · Part 6 of 11 · 9 min

5.4 Rotational inertiaWhere the mass sits

Mr. Thompkins
Mass tells you how hard it is to change straight-line motion. For spinning, there's a twin quantity, and it has a twist: it cares not only about how much mass there is but about where it sits.

Rotational inertia, $I$, measures how much an object resists changes in its rotation. For a single small mass $m$ at distance $r$ from the axis, $I = mr^2$. For a system of small masses, add them up: $I = \Sigma m_ir_i^2$. The unit is kg·m². Notice the square: mass twice as far from the axis counts four times as much.

?Wait, what is inertia?
Inertia is an object's resistance to changes in its motion. In Unit 2, mass was the measure of it: a bigger mass needs a bigger net force for the same acceleration. Rotational inertia plays the same role for spinning.
1.5 kg1.5 kg0.40 m0.40 maxis A: centeraxis B: endA: $I$ = 0.48 kg·m²B: $I$ = 0.96 kg·m²
Two 1.5 kg masses on a light 0.80 m rod. About the center, each mass is 0.40 m out. About one end, one mass is on the axis and the other is 0.80 m away.

Here's why the axis matters. About the center, $I = (1.5)(0.40)^2 + (1.5)(0.40)^2 = 0.48$ kg·m². About one end, one mass sits on the axis and adds nothing, and the other is 0.80 m away: $I = (1.5)(0.80)^2 = 0.96$ kg·m². Same object, same mass, twice the rotational inertia. That's why a baseball bat is easier to swing when you "choke up" on it: you move the axis closer to where the mass is.

For solid objects, adding up every tiny bit of mass gives formulas that depend on the shape. You don't need to derive them, and the exam gives you the one you need. But you should be able to rank them, because they all follow one rule: the more mass sits far from the axis, the bigger $I$ is.

Object, mass MAxisRotational inertia
Point mass at distance rAny axisMr²
Thin hoop, radius RCenter, perpendicular to the hoopMR²
Solid disk or cylinder, radius RCenter, along the axle½MR²
Solid sphere, radius RThrough the center⅖MR²
Thin rod, length ℓCenter, perpendicular to the rod(1/12)Mℓ²
Thin rod, length ℓOne end, perpendicular to the rod⅓Mℓ²
Rotational inertia of common shapes. The exam gives you the formula when you need it.
I for M = 2.0 kg, R = 0.50 m (kg·m²)0.50hoop0.25disk0.20sphere
Three objects with the same mass and radius. The hoop has all its mass at the rim, so it has the biggest I.

Moving the axis: the parallel axis theorem

If you know $I_{cm}$, the rotational inertia about an axis through the center of mass, you can find it about any parallel axis a distance $d$ away: $I = I_{cm} + Md^2$. Check it on the dumbbell: $I_{cm} = 0.48$ kg·m², $M = 3.0$ kg and the end is $d = 0.40$ m from the center, so $I = 0.48 + (3.0)(0.40)^2 = 0.96$ kg·m². It matches. The rotational inertia about the center of mass is always the smallest of all parallel axes.

?Wait, where is the center of mass of a uniform rod?
At its midpoint. For any uniform, symmetric object, the center of mass is at the geometric center, the same place its weight acts.
Pause and think
A figure skater spins with her arms out, then pulls them in close to her body. Her mass doesn't change. What happens to her rotational inertia, and why?
I thought about it. Show me
It decreases, because the mass in her arms moves closer to the axis and $I = \Sigma mr^2$ depends on $r^2$. (In Unit 6 you'll see that this is exactly why she spins faster.)
Build a rotational inertia
A uniform rod has mass 1.2 kg and length 1.0 m. For a rod, $I_{cm} = \tfrac{1}{12}M\ell^2$. (a) Find $I$ about its center. (b) Use the parallel axis theorem to find $I$ about one end. (c) A small 0.50 kg ball is glued to the far end. Find $I$ of the rod + ball about the first end.
  1. (a) $I_{cm} = \tfrac{1}{12}(1.2)(1.0)^2 = 0.10$ kg·m².
  2. (b) The end is $d = 0.50$ m from the center: $I = 0.10 + (1.2)(0.50)^2 = 0.10 + 0.30 = 0.40$ kg·m².
    Why?
    This matches the table's ⅓Mℓ² = ⅓(1.2)(1.0)² = 0.40. The parallel axis theorem is where that formula comes from.
  3. (c) The ball is a point mass 1.0 m from the axis: $I_{ball} = (0.50)(1.0)^2 = 0.50$ kg·m². Rotational inertias about the same axis add: $I = 0.40 + 0.50 = 0.90$ kg·m².
    Why?
    You can add rotational inertias of parts only when they are about the same axis.

Answer: (a) 0.10 kg·m². (b) 0.40 kg·m². (c) 0.90 kg·m².

Stuck? Get a hint
  1. $\tfrac{1}{12}(1.2)(1.0)^2$ for the center.
  2. Add $Md^2$ with $d = 0.50$ m, the distance from the center to the end.
  3. The ball adds $mr^2$ with $r = 1.0$ m.
Check yourself
A hoop and a solid disk have the same mass and the same radius. Which has the larger rotational inertia about its center, and why?
  1. AThe disk, because it has more material.
  2. BThe hoop, because all of its mass is at the maximum distance from the axis.
  3. CThey are equal, because their masses and radii are equal.
  4. DThe disk, because its mass is spread over a larger area.
Show the answer

B. Same mass, but the hoop's mass is all at the rim, where $r^2$ is biggest: $MR^2$ versus $\tfrac12MR^2$. Equal mass and radius don't mean equal $I$; the distribution matters.

  • $I = \Sigma mr^2$ for point masses (kg·m²). Mass far from the axis counts much more.
  • The same object has different I about different axes. I about the center of mass is the smallest.
  • Parallel axis theorem: $I = I_{cm} + Md^2$.
  • Same M and R: hoop > disk > sphere.