AP Physics 1 · Unit 5 lecture · Part 5 of 11 · 7 min

5.3 Adding torquesForce diagrams for objects that turn

Mr. Thompkins
Real objects feel several forces at once. To know which way something will turn, you add up the torques, with signs. And to see the torques, you need a new kind of diagram.
?Wait, what does a free-body diagram show?
A free-body diagram shows one object as a dot with an arrow for every force on it, each starting at the dot. It's perfect for $\Sigma F = ma$, because it doesn't matter where on the object a force acts when you only care about straight-line motion.

For rotation, where a force acts matters. So we draw the object itself, a rod or a disk, and start each force arrow at the exact point where it acts. The College Board calls this a force diagram, as opposed to the free-body diagram's dot. Weight acts at the center of mass. A cable pulls where it's attached, along the cable. A hinge or pivot pushes at the pivot.

20 N30 N10 Npivot force0.50 m0.30 m0.50 mcounterclockwise: +
A 1.0 m rod on a pivot at its center, with three forces drawn where they act. The pivot force acts at the axis, so it makes no torque.

Take the rod above, with the axis at the pivot and counterclockwise positive. The 20 N force pushes down on the left end, 0.50 m away. Alone, it would turn the rod counterclockwise: $+(0.50)(20) = +10$ N·m. The 30 N force pushes down 0.30 m to the right: clockwise, $-(0.30)(30) = -9.0$ N·m. The 10 N force pushes up on the right end, 0.50 m away: counterclockwise, $+(0.50)(10) = +5.0$ N·m. The pivot force acts at the axis: zero. Net torque: $10 - 9.0 + 5.0 = +6.0$ N·m, counterclockwise.

?Wait, how can a downward push on the left make a counterclockwise turn?
Picture a clock face with the pivot at its center. The left end moving down is moving the way the 9 o'clock hand moves toward 6 o'clock, which is counterclockwise. On the right side, a downward push is clockwise. Same direction of force, opposite turn, because it's on the other side of the axis.
Pause and think
In the rod above, what would happen to the net torque if the 30 N force were moved to the right end of the rod?
I thought about it. Show me
Its lever arm grows from 0.30 m to 0.50 m, so its torque becomes $-15$ N·m and the net torque is $10 - 15 + 5.0 = 0$. The rod would have no tendency to start turning.
Net torque about a chosen axis
A uniform 2.0 m board of mass 4.0 kg is pivoted 0.50 m from its left end. A 3.0 kg box sits on the left end. (a) Draw the forces where they act. (b) Find the net torque about the pivot. (c) Which way will the board start to turn?
  1. (a) Forces: the box's weight, $(3.0)(9.8) = 29.4$ N down at the left end; the board's weight, $(4.0)(9.8) = 39.2$ N down at its center (1.0 m from the left end); the pivot force up at the pivot.
    Why?
    A uniform board's weight acts at its middle. On a force diagram, start each arrow where the force acts.
  2. (b) Lever arms from the pivot: the box is 0.50 m to the left; the board's center is 0.50 m to the right; the pivot force has zero lever arm.
  3. Box: down on the left side, counterclockwise: $+(0.50)(29.4) = +14.7$ N·m. Board: down on the right side, clockwise: $-(0.50)(39.2) = -19.6$ N·m.
  4. Net: $14.7 - 19.6 = -4.9$ N·m.
    Why?
    The negative sign means clockwise.
  5. (c) Clockwise: the long right side tips down.

Answer: (b) −4.9 N·m (4.9 N·m clockwise). (c) The right side goes down.

Stuck? Get a hint
  1. Where does the board's own weight act? Measure from the pivot.
  2. Both lever arms are 0.50 m.
  3. Compare 29.4 N × 0.50 m with 39.2 N × 0.50 m.
Check yourself
Why must you draw an extended object, not a dot, when you analyze torques?
  1. ABecause forces on an extended object are bigger.
  2. BBecause torque depends on where each force acts relative to the axis.
  3. CBecause gravity doesn't act on a dot.
  4. DBecause free-body diagrams can only show two forces.
Show the answer

B. Torque is $r_\perp F$, and $r_\perp$ depends on the point where the force acts. A dot hides that. A force diagram keeps each force at its point of application.

Exam tip from Mr. T

On an FRQ force diagram for rotation, graders check two things: every arrow starts at the right point (weight at the center, cable at its attachment, hinge at the hinge), and every arrow points the right way. Extra forces cost points, so don't add a force you can't name the source of.

  • Force diagram: draw the object, and start each arrow where that force acts.
  • Net torque: add each force's torque with its sign about one chosen axis.
  • A force through the axis (pivot, hinge, axle) makes zero torque about that axis.
  • Weight acts at the center of mass; for a uniform object that's the middle.