AP Physics 1 · Unit 5 lecture · Part 2 of 11 · 7 min

5.1 Graphs of rotationSlopes and areas, now spinning

Mr. Thompkins
If you can read a velocity-time graph, you can read an angular velocity graph. Same rules, new letters. Let's prove it with one turntable.

A turntable starts from rest, speeds up steadily to 6.0 rad/s in 3.0 s, spins at that rate until 6.0 s, then slows steadily to a stop at 8.0 s. Its angular velocity against time looks like the velocity graphs you drew in Unit 1.

01234567802468t (s)$\omega$ (rad/s)area = angle turned$\alpha$ = +2.0$\alpha$ = −3.0
Angular velocity of a turntable. The slope of each piece is the angular acceleration; the area under the whole graph is the angle turned.
?Wait, what did slope and area mean on a velocity-time graph?
On a velocity-time graph, the slope is the acceleration and the area between the graph and the time axis is the displacement. Area above the axis counts as positive, area below as negative.

So on an $\omega$-$t$ graph the slope is $\alpha$ and the area is $\Delta\theta$. For the turntable: the first slope is $6.0/3.0 = +2.0$ rad/s², the middle slope is 0, and the last slope is $-6.0/2.0 = -3.0$ rad/s². The area is a triangle plus a rectangle plus a triangle: $\tfrac12(3.0)(6.0) + (3.0)(6.0) + \tfrac12(2.0)(6.0) = 9.0 + 18 + 6.0 = 33$ rad.

The matching angle-time graph shows the same story another way. The slope of a $\theta$-$t$ graph is $\omega$. While the turntable speeds up, the graph curves upward; while it spins steadily it's a straight line; while it slows down it bends over and levels off at 33 rad.

?Wait, how do I find the area of a trapezoid on a graph?
Average the two parallel sides and multiply by the width: $\tfrac12(\text{side}_1 + \text{side}_2) \times \text{width}$. On an $\omega$-$t$ graph the parallel sides are two angular velocities and the width is a time, so the area comes out in radians.
012345678010203040t (s)$\theta$ (rad)curves upstraightlevels off: 33 rad
Angle against time for the same turntable. Steeper means spinning faster. It ends at 33 rad, matching the area under the ω graph.
Pause and think
On an angle-time graph for a spinning wheel, the graph is a horizontal line from 2 s to 4 s. What is the wheel doing then?
I thought about it. Show me
It's not turning: the angle isn't changing, so $\omega = 0$ (the slope is zero). A horizontal line on a $\theta$-$t$ graph means the object is at rest, not that it spins steadily.
Translation between representations
Use the turntable's $\omega$-$t$ graph. (a) How many revolutions does it make while speeding up? (b) Check the 33 rad total with a kinematics equation for the slowing-down part. (c) Sketch, in words, the $\alpha$-$t$ graph.
  1. (a) Speeding up, 0 to 3.0 s: area $= \tfrac12(3.0)(6.0) = 9.0$ rad, and $9.0/2\pi = 1.4$ rev.
  2. (b) Slowing down: $\omega_0 = 6.0$, $\alpha = -3.0$, $t = 2.0$ s. $\Delta\theta = (6.0)(2.0) + \tfrac12(-3.0)(2.0)^2 = 12 - 6.0 = 6.0$ rad. That matches the last triangle, and $9.0 + 18 + 6.0 = 33$ rad.
    Why?
    Graph areas and kinematics equations are two views of the same physics. Use one to check the other.
  3. (c) The $\alpha$-$t$ graph is three flat pieces: $+2.0$ rad/s² from 0 to 3 s, 0 from 3 to 6 s, and $-3.0$ rad/s² from 6 to 8 s.
    Why?
    Constant slopes on the ω graph become flat lines on the α graph. Jumps between them are fine.

Answer: (a) 9.0 rad, about 1.4 rev. (b) 6.0 rad for the last 2.0 s, so 33 rad in all. (c) +2.0, then 0, then −3.0 rad/s², each a flat segment.

Stuck? Get a hint
  1. Area under the ω-t graph from 0 to 3 s is a triangle.
  2. Use $\Delta\theta = \omega_0t + \tfrac12\alpha t^2$ with $\alpha = -3.0$.
  3. A straight line on ω-t means a constant α, a flat line on α-t.
Check yourself
An $\omega$-$t$ graph for a wheel is a straight line from 10 rad/s at $t = 0$ down to 4.0 rad/s at $t = 3.0$ s. What angle does the wheel turn in those 3.0 s?
  1. A6.0 rad
  2. B21 rad
  3. C30 rad
  4. D42 rad
Show the answer

B. The area is a trapezoid: $\tfrac12(10 + 4.0)(3.0) = 21$ rad. 30 rad uses only the starting 10 rad/s, and 6.0 rad is the change in angular velocity, not an angle.

  • ω-t graph: slope = α, area = Δθ.
  • θ-t graph: slope = ω. Curving up means speeding up; straight means steady spin; flat means at rest.
  • Check graph areas with the kinematics equations, and the other way around.