AP Physics 1 · Unit 5 lecture · Part 9 of 11 · 8 min

5.6 Newton's second law in rotational formNet torque makes angular acceleration

Mr. Thompkins
Equilibrium was the "nothing changes" case. Now let the torques be unbalanced. You can already guess the law: in Unit 2 it was net force equals mass times acceleration.

Newton's second law for rotation: $\alpha = \dfrac{\Sigma\tau}{I}$, or $\Sigma\tau = I\alpha$, with every torque and the rotational inertia taken about the same axis. A bigger net torque gives a bigger angular acceleration. A bigger rotational inertia gives a smaller one. And $\alpha$ points the same way as the net torque.

?Wait, what did $\Sigma F = ma$ tell us?
The acceleration of an object is in the direction of the net force, proportional to it, and inversely proportional to the mass: $a = \Sigma F/m$. The rotational law is the same sentence with torque, angular acceleration and rotational inertia.

Translation (Unit 2)

  • $\Sigma F = ma$
  • Net force from other objects
  • Mass resists changes in velocity
  • Free-body diagram: forces on a dot

Rotation (Unit 5)

  • $\Sigma\tau = I\alpha$
  • Net torque about one chosen axis
  • Rotational inertia resists changes in ω
  • Force diagram: forces where they act

Here's a picture of it. Apply the same 0.40 N·m torque to a hoop and a solid disk, each 2.0 kg with radius 0.50 m, starting from rest. The hoop has $I = 0.50$ kg·m² and the disk $I = 0.25$ kg·m², so the hoop gets $\alpha = 0.80$ rad/s² and the disk gets $\alpha = 1.6$ rad/s². On an $\omega$-$t$ graph, the disk's line is twice as steep.

0123450246810t (s)$\omega$ (rad/s)disk: $\alpha$ = 1.6hoop: $\alpha$ = 0.80
The same torque on a hoop and a disk of equal mass and radius. Slope = α = τ/I, so the disk, with half the rotational inertia, spins up twice as fast.
Pause and think
You push a merry-go-round with the same force at the same point, first when it's empty and then when four kids sit near its rim. Compare the angular accelerations.
I thought about it. Show me
Smaller with the kids. The torque is the same, but the kids add a lot of rotational inertia (mass far from the axis), and $\alpha = \tau/I$.
?Wait, what's the rotational inertia of a solid disk?
$I = \tfrac12MR^2$ about its axle. A grinding wheel, a pulley or a flywheel is usually modeled as a solid disk unless the problem says otherwise.
Spin up, then coast
A grinding wheel is a solid disk of mass 2.0 kg and radius 0.10 m. A motor exerts a torque of 0.50 N·m on it, and friction in the bearings exerts a constant 0.10 N·m opposing the motion. (a) Find its angular acceleration from rest. (b) How long does it take to reach 100 rad/s? (c) The motor is then switched off. How long until it stops?
  1. $I = \tfrac12MR^2 = \tfrac12(2.0)(0.10)^2 = 0.010$ kg·m².
  2. (a) The net torque is the motor torque minus friction: $\Sigma\tau = 0.50 - 0.10 = 0.40$ N·m. $\alpha = \dfrac{0.40}{0.010} = 40$ rad/s².
    Why?
    Net means add all torques with signs. Using 0.50 N·m alone is the most common error.
  3. (b) $t = \dfrac{\omega - \omega_0}{\alpha} = \dfrac{100 - 0}{40} = 2.5$ s.
  4. (c) Now only friction acts: $\alpha = \dfrac{-0.10}{0.010} = -10$ rad/s². $t = \dfrac{0 - 100}{-10} = 10$ s.
    Why?
    The friction torque that barely mattered during spin-up is the only torque now, so slowing takes four times as long as speeding up.

Answer: (a) 40 rad/s². (b) 2.5 s. (c) 10 s.

Stuck? Get a hint
  1. First find $I$ for a solid disk.
  2. Net torque: $0.50 - 0.10$ N·m.
  3. After switch-off, $\alpha = -0.10/0.010$.
Check yourself
A net torque of 6.0 N·m acts on a wheel with rotational inertia 2.0 kg·m², starting from rest. What is its angular velocity after 3.0 s?
  1. A1.0 rad/s
  2. B3.0 rad/s
  3. C9.0 rad/s
  4. D36 rad/s
Show the answer

C. $\alpha = 6.0/2.0 = 3.0$ rad/s², and $\omega = \alpha t = (3.0)(3.0) = 9.0$ rad/s. 3.0 rad/s is the angular acceleration, not the angular velocity.

  • $\alpha = \Sigma\tau / I$, with torques and I about the same axis.
  • Use the net torque: motor minus friction, with signs.
  • Same torque, larger I, smaller α: the ω-t line is less steep.
  • Once you have α, the Unit 5.1 kinematics equations give ω, θ and t.