AP Physics C: Mechanics · Unit 5 lecture · Part 9 of 12 · 10 min

5.5 Rotational equilibrium and Newton's first law in rotational formNo net force, no net torque

Mr. Thompkins
Shelves, bridges, ladders, your own arm holding a backpack: all of them sit still because the forces and the torques both balance. Get comfortable with this section and a whole family of exam problems turns into bookkeeping.

Newton's first law has a rotational form: if the net torque on a rigid object is zero, its angular velocity stays constant. It might be at rest, or spinning steadily. An object in static equilibrium is at rest in every way, so it needs two conditions: no net force, $\Sigma\vec F = 0$ (it doesn't start to slide), and no net torque, $\Sigma\tau = 0$ (it doesn't start to turn).

?Wait, what does $\Sigma\vec F = 0$ give me in practice?
Two equations in two dimensions: the forces up equal the forces down, and the forces left equal the forces right (Unit 2). With the torque equation, that's up to three equations for up to three unknowns.

Here's the trick that makes these problems easy. If an object is in equilibrium, the net torque is zero about every point, so you get to choose the pivot for your torque equation. Choose it where an unknown force acts. That force has zero lever arm about that point, so it drops out of the equation, and you can solve for another unknown directly.

40 kg$N_1$$N_2$147 N392 N00.502.03.03.24.0 m
A 4.0 m, 15 kg plank on supports at 0.50 m and 3.0 m, with a 40 kg box at 3.2 m. Gravity on the plank acts at its center, 2.0 m. Positions in meters along the bottom; force arrows not to scale.
Support forces on a plank
Find the upward forces $N_1$ and $N_2$ from the two supports in the figure.
  1. Weights: plank $(15)(9.8) = 147\ \text{N}$ at x = 2.0 m; box $(40)(9.8) = 392\ \text{N}$ at x = 3.2 m.
  2. Torques about the left support (x = 0.50 m), so $N_1$ drops out. Counterclockwise positive: $N_2(2.5) - 147(1.5) - 392(2.7) = 0$.
    Why?
    Each lever arm is a distance from the chosen pivot, not from the end of the plank. That's the step where most errors happen.
  3. $N_2 = \frac{220.5 + 1058.4}{2.5} \approx 512\ \text{N}$.
  4. Forces: $N_1 + N_2 = 147 + 392$, so $N_1 = 539 - 512 \approx 27\ \text{N}$.
    Why?
    Use the force equation for the last unknown. Or take torques about the right support as a check: $N_1(2.5) = 147(1.0) - 392(0.20) = 68.6$, so $N_1 \approx 27\ \text{N}$.

Answer: $N_1 \approx 27\ \text{N}$ and $N_2 \approx 512\ \text{N}$.

Stuck? Get a hint
  1. Take torques about the left support so $N_1$ disappears.
  2. Lever arms from x = 0.50 m: 1.5 m for the plank's weight, 2.7 m for the box, 2.5 m for $N_2$.
  3. Then $N_1 = (\text{total weight}) - N_2$.
Pause and think
$N_1$ is only 27 N. If the box slides farther out onto the overhang, what happens to $N_1$? What does $N_1 = 0$ mean physically?
I thought about it. Show me
$N_1$ shrinks as the box moves out, because the box's torque about the right support grows. When $N_1$ reaches zero, the left support is just barely touching: the plank is about to tip about the right support. A support can push but can't pull, so $N_1$ can't go negative.
How far before it tips?
How far can the box sit from the left end before the plank tips?
  1. At the tipping point $N_1 = 0$ and the plank pivots on the right support (x = 3.0 m). Take torques about it.
  2. The plank's weight acts 1.0 m to the left of the right support; the box sits a distance $(x - 3.0)$ to the right. Balance: $147(1.0) = 392(x - 3.0)$.
  3. $x - 3.0 = \frac{147}{392} = 0.375\ \text{m}$, so $x = 3.375\ \text{m}$, about 3.4 m from the left end.
    Why?
    Only 0.375 m past the support: the heavy box needs very little lever arm to beat the plank's weight.

Answer: About 3.4 m from the left end (0.375 m past the right support).

elbow$F_b$ (biceps)14.7 N5.0 kg49 Njoint force4.0 cm15 cm35 cm
Your forearm as a lever. The biceps attaches just 4.0 cm from the elbow, the forearm's own weight (14.7 N) acts at 15 cm, and a 5.0 kg ball sits in the hand at 35 cm.
Why your biceps works so hard
Hold the forearm horizontal with the 5.0 kg ball, as in the figure. The forearm has mass 1.5 kg. Treat the biceps force as vertical. Find (a) the biceps force and (b) the force at the elbow joint.
  1. (a) Torques about the elbow (the joint force drops out): $F_b(0.040) = (1.5)(9.8)(0.15) + (5.0)(9.8)(0.35) = 2.205 + 17.15$.
  2. $F_b = \frac{19.355}{0.040} \approx 484\ \text{N}$: almost ten times the ball's 49 N weight.
    Why?
    A tiny lever arm needs a huge force. The payoff is speed: a small contraction of the muscle swings the hand a long way.
  3. (b) Forces: up $F_b = 484\ \text{N}$; down 14.7 N and 49 N and the joint force J. So $J = 484 - 14.7 - 49 \approx 420\ \text{N}$, pushing down on the forearm.

Answer: (a) about 484 N (b) about 420 N, downward on the forearm.

Stuck? Get a hint
  1. Put the pivot at the elbow so the unknown joint force drops out.
  2. Lever arms: 0.040 m for the biceps, 0.15 m and 0.35 m for the two weights.
  3. Then balance the vertical forces to find the joint force.
?Wait, why can I put the forearm's whole weight at one point?
Because the torque of gravity on an extended object equals its total weight acting at its center of mass (section 5). For the forearm, that's 15 cm from the elbow.
Check yourself
A 30 kg child sits 2.0 m from the pivot of a seesaw. Where must a 40 kg child sit, on the other side, to balance it?
  1. A1.0 m from the pivot
  2. B1.5 m from the pivot
  3. C2.0 m from the pivot
  4. D2.7 m from the pivot
Show the answer

B. Torques balance: $(30)(g)(2.0) = (40)(g)x$, so $x = 1.5\ \text{m}$. g cancels. Choice D has the ratio upside down: the heavier child must sit closer.

Check yourself
A wheel spins at a constant 20 rad/s on a frictionless axle. What is the net torque on it?
  1. AZero
  2. BPositive, to keep it spinning
  3. CIt depends on the wheel's rotational inertia
  4. D$20I$
Show the answer

A. Newton's first law in rotational form: constant angular velocity means zero net torque. Just as a puck sliding at constant velocity needs no net force, a wheel spinning steadily needs no net torque. Choice B is the rotational version of the old "motion needs a force" mistake.

  • Static equilibrium: $\Sigma\vec F = 0$ and $\Sigma\tau = 0$.
  • Zero net torque means constant ω (Newton's first law, rotational form).
  • Choose the pivot where an unknown force acts, so it drops out.
  • Weight acts at the center of mass. A support that's about to lose contact has zero normal force.