AP Physics C: E&M · Unit 11 lecture · Part 5 of 11 · 9 min

11.5 Compound DC circuits: series and parallelCollapse, then expand

Mr. Thompkins
Most circuits on the exam are a handful of resistors wired in groups. There's a reliable method: shrink the whole thing down to one resistor, find the battery current, then rebuild the circuit one piece at a time. Let's learn both rules, then the method.

Series rule. Resistors in series carry the same current I, and their voltages add: $\Delta V = IR_1 + IR_2 + \dots$. So the combination acts like one resistor $R_s = R_1 + R_2 + \dots$, bigger than any of them. Parallel rule. Resistors in parallel have the same ΔV, and their currents add: $I = \frac{\Delta V}{R_1} + \frac{\Delta V}{R_2} + \dots$. So $\frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \dots$, smaller than the smallest. For exactly two, $R_p = \frac{R_1R_2}{R_1 + R_2}$, "product over sum".

?Wait, why does adding a parallel resistor lower the total?
Every new parallel branch is another path for the current, so the same voltage pushes more total current. More current for the same voltage means less resistance. Two equal resistors in parallel give exactly half of one.
?Wait, how do I add fractions like 1/12 + 1/6 quickly?
Put them over a common denominator: $\frac{1}{12} + \frac{2}{12} = \frac{3}{12} = \frac{1}{4}$. Then flip it: $R_p = 4\ \Omega$. Forgetting to flip at the end is the classic slip. Product over sum, $\frac{(12)(6)}{12 + 6} = 4$, skips the fractions for two resistors.
SeriesParallel
What is sharedThe same currentThe same voltage
What addsVoltagesCurrents
Resistors$R_s = R_1 + R_2 + \dots$$\frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \dots$
ResultBigger than the biggestSmaller than the smallest
Capacitors (11.8)$\frac{1}{C_s} = \frac{1}{C_1} + \frac{1}{C_2} + \dots$$C_p = C_1 + C_2 + \dots$
Series and parallel side by side. Capacitors (Topic 11.8) combine the opposite way from resistors.
24 V$R_1 = 4.0\ \Omega$$12\ \Omega$$2.0\ \Omega$$4.0\ \Omega$3.0 A1.0 A2.0 A
A 24 V ideal battery. R₁ = 4.0 Ω carries the full current; R₂ = 12 Ω is in parallel with the series pair 2.0 Ω + 4.0 Ω. The green arrows are the currents the walk finds.
Collapse, then expand
In the circuit shown, find the current through and voltage across every resistor, and check that the power balances.
collapse$4.0 + (12 \parallel 6.0)$$4.0 + 4.0$$R_{eq} = 8.0\ \Omega$$R_3 + R_4 = 6.0$$\frac{(12)(6.0)}{18}$$I = \frac{24}{8.0}$expandI = 3.0 A$V_1 = 12$, $V_{par} = 12$1.0 A and 2.0 A$V_1 = (3.0)(4.0)$$24 - 12 = 12$ V$\frac{12}{12}$ and $\frac{12}{6.0}$shrink to one resistor, then rebuild piece by piece
The method in one picture: collapse to a single resistor, then expand back out with the current and voltages.
  1. Collapse the innermost group: $R_3 + R_4 = 2.0 + 4.0 = 6.0\ \Omega$ (series).
    Why?
    Always simplify from the inside out. The 2.0 Ω and 4.0 Ω share one branch, so they combine first.
  2. That 6.0 Ω is in parallel with $R_2$: $\frac{(12)(6.0)}{12 + 6.0} = 4.0\ \Omega$. Then add $R_1$ in series: $R_{eq} = 4.0 + 4.0 = 8.0\ \Omega$.
  3. Battery current: $I = \frac{24}{8.0} = 3.0$ A. All of it goes through $R_1$, so $\Delta V_1 = (3.0)(4.0) = 12$ V.
  4. The parallel group gets what's left: $24 - 12 = 12$ V. So $I_2 = \frac{12}{12} = 1.0$ A and the 6.0 Ω branch carries $\frac{12}{6.0} = 2.0$ A. Check: 1.0 + 2.0 = 3.0 A.
    Why?
    Junction rule as a check: the currents leaving a junction must add up to the current coming in.
  5. In the 6.0 Ω branch: $\Delta V_3 = (2.0)(2.0) = 4.0$ V and $\Delta V_4 = (2.0)(4.0) = 8.0$ V, which add to 12 V.
  6. Power: $R_1$ 36 W, $R_2$ 12 W, $R_3$ 8.0 W, $R_4$ 16 W, total 72 W. The battery supplies $(24)(3.0) = 72$ W. Balanced.

Answer: $R_1$: 3.0 A, 12 V. $R_2$: 1.0 A, 12 V. $R_3$: 2.0 A, 4.0 V. $R_4$: 2.0 A, 8.0 V. Total power 72 W in and out.

Stuck? Get a hint
  1. Which two resistors share one branch with nothing between them? Combine those first.
  2. The 6.0 Ω pair sits between the same junctions as R₂. Use product over sum.
  3. Once you have I = 3.0 A, find R₁'s voltage. What's left over is across the parallel group.

What happens when something changes

The exam loves "what happens to the brightness of X when Y is removed?" Reason in a chain: total resistance, then battery current, then the voltage across the part of the circuit you care about, then the current or power there. Every link is a sentence on the free response.

Pause and think
In the circuit above, $R_2$ burns out and becomes an open gap. Predict: does the current through $R_4$ go up, down, or stay the same?
I thought about it. Show me
Up. With $R_2$ gone, the total is $4.0 + 6.0 = 10\ \Omega$, so the battery current drops to 2.4 A. But now all of it flows through $R_3$ and $R_4$ (before, only 2.0 A did). $R_4$'s current rises from 2.0 A to 2.4 A, and its voltage from 8.0 V to 9.6 V.
Check yourself
In the original circuit (24 V, all resistors in place), which resistor dissipates the most power?
  1. A$R_1$
  2. B$R_2$
  3. C$R_3$
  4. D$R_4$
Show the answer

A. $R_1$ carries the full 3.0 A: $(3.0)^2(4.0) = 36$ W. $R_4$ is next with 16 W. The trap is $R_2$, the biggest resistor: with only 1.0 A through it, it uses just 12 W. Bigger R means more power only when the current is shared.

Exam tip from Mr. T

On a "rank the brightness" question, write the current through each bulb in terms of the battery current first (for example $I$, $\frac{I}{3}$, $\frac{2I}{3}$), then rank $I^2R$. The ranking is the answer; the expressions are the justification.

  • Series: same current, resistances add. Parallel: same voltage, reciprocals add, result below the smallest.
  • Collapse from the inside out to $R_{eq}$, find the battery current, then expand back out.
  • Check with the junction rule (currents add up) and the power balance.
  • For "what changes" questions: $R_{total}$, then battery current, then local voltage, then local current or power.