AP Physics C: Mechanics · Unit 5 lecture · Part 11 of 12 · 9 min

5.6 Translation and rotation togetherPulleys with mass

Mr. Thompkins
In Unit 2 every pulley was "light and frictionless", and the tension was the same on both sides. Now the pulley has mass, so it takes a torque to spin it up, and that torque comes from a difference in tension. This is the classic Physics C problem: blocks that translate, a pulley that rotates, all tied together.

The method: draw a free-body diagram for each block and a force diagram for the pulley showing where each force acts. Write $\Sigma F = ma$ for each block and $\Sigma\tau = I\alpha$ for the pulley. Then tie them together with the constraints: the string doesn't stretch (both blocks share one acceleration size), and it doesn't slip on the pulley ($a = R\alpha$).

$m_1$ = 2.0 kg$m_2$1.0 kg$T_1$$T_2$disk pulleyM = 2.0 kgfrictionless table
A 2.0 kg block on a frictionless table, tied by a string over a pulley (a uniform 2.0 kg disk) to a hanging 1.0 kg block. The string doesn't slip, so the pulley turns as the blocks move.
$F_N$ = 19.6 N$F_g$ = 19.6 N$T_1$ = 4.9 N
Block on the table, to scale: only $T_1$ is unbalanced.
$T_2$ = 7.35 N$F_g$ = 9.8 N
Hanging block, to scale: weight beats $T_2$.
?Wait, why do both blocks have the same acceleration?
They're joined by a string that doesn't stretch. Whenever the hanging block drops a certain distance, the table block slides the same distance. Same distance in the same time means the same speed and the same acceleration size.
Table, pulley and hanging block
For the system in the figure (table block $m_1 = 2.0$ kg, hanging block $m_2 = 1.0$ kg, pulley a uniform disk with M = 2.0 kg and radius R), (a) derive the acceleration in symbols, then (b) calculate it and both tensions.
  1. Table block: $T_1 = m_1a$. Hanging block (down positive): $m_2g - T_2 = m_2a$.
  2. Pulley: $T_2$ turns it one way and $T_1$ the other, both at radius R: $(T_2 - T_1)R = \frac{1}{2}MR^2\alpha$. No slip: $\alpha = \frac{a}{R}$, so $T_2 - T_1 = \frac{1}{2}Ma$.
    Why?
    R cancels. The pulley's radius doesn't matter, only its mass and shape (through the $\frac{1}{2}$).
  3. (a) Add the three equations: $m_2g = (m_1 + m_2 + \frac{1}{2}M)a$, so $a = \frac{m_2g}{m_1 + m_2 + M/2}$.
    Why?
    The pulley acts like an extra mass of M/2 that must be accelerated. That's a good way to remember it and a good sanity check.
  4. (b) $a = \frac{(1.0)(9.8)}{2.0 + 1.0 + 1.0} = 2.45\ \text{m/s}^2$. $T_1 = (2.0)(2.45) = 4.9\ \text{N}$. $T_2 = (1.0)(9.8 - 2.45) \approx 7.35\ \text{N}$.
  5. Check: $T_2 - T_1 = 2.45\ \text{N}$ and $\frac{1}{2}Ma = \frac{1}{2}(2.0)(2.45) = 2.45\ \text{N}$. They match.

Answer: (a) $a = \frac{m_2g}{m_1 + m_2 + M/2}$ (b) 2.45 m/s², $T_1 = 4.9$ N, $T_2 \approx 7.35$ N.

Stuck? Get a hint
  1. Three equations: one for each block, one for the pulley.
  2. Pulley: $(T_2 - T_1)R = \frac{1}{2}MR^2(a/R)$.
  3. Add the equations so the tensions cancel.
Pause and think
What happens to the two tensions, and to the acceleration, if the pulley's mass shrinks toward zero?
I thought about it. Show me
With M = 0 the pulley equation gives $T_2 - T_1 = 0$: the tensions become equal, the Unit 2 light-pulley result. The acceleration rises to $\frac{m_2g}{m_1 + m_2} \approx 3.27\ \text{m/s}^2$, because nothing has to be spun up.
?Wait, why does the pulley need different tensions at all?
The pulley starts from rest and spins faster and faster, so it has an angular acceleration, which needs a net torque. The axle force and the pulley's weight act at the axis and give no torque. The only torques come from the two tensions, so they must differ, with the bigger tension on the side the pulley turns toward.
Check yourself
The disk pulley above is replaced by a hoop with the same mass and radius. What is the new acceleration?
  1. A2.45 m/s²
  2. B1.96 m/s²
  3. C3.27 m/s²
  4. D4.90 m/s²
Show the answer

B. A hoop has $I = MR^2$, so the pulley now acts like an extra mass M instead of M/2: $a = \frac{9.8}{2.0 + 1.0 + 2.0} = 1.96\ \text{m/s}^2$. More rotational inertia, less acceleration. Choice C is the massless-pulley value.

Check yourself
A yo-yo (a uniform disk of mass m) unwinds as it falls, with the top of its string held still. The string comes off its outer edge. What is the yo-yo's acceleration?
  1. Ag
  2. B$\frac{2}{3}g$
  3. C$\frac{1}{2}g$
  4. D$\frac{1}{3}g$
Show the answer

B. Translation: $mg - T = ma$. Rotation about its center: $TR = \frac{1}{2}mR^2\alpha$ with $a = R\alpha$, so $T = \frac{1}{2}ma$. Then $mg = \frac{3}{2}ma$ and $a = \frac{2}{3}g \approx 6.5\ \text{m/s}^2$. Choice D is the tension divided by m, not the acceleration.

  • One $\Sigma F = ma$ per block, one $\Sigma\tau = I\alpha$ per pulley, plus constraints.
  • No slip: $a = R\alpha$. A massive pulley has different tensions; their difference spins it.
  • A disk pulley acts like an extra mass M/2 in the denominator; a hoop like an extra M.
  • Check: setting the pulley's mass to zero should give the Unit 2 answer.