AP Physics C: Mechanics · Unit 5 lecture · Part 3 of 12 · 8 min

5.2 Connecting linear and rotational motionSame ω, different speeds

Mr. Thompkins
On a merry-go-round, a kid at the edge and a kid near the center go around once in the same time. Who's moving faster? Who feels a bigger pull outward? The answer links the rotation of the whole object to the motion of each point on it.

A point at distance r from the axis travels along a circle. When the object turns through angle θ, the point moves an arc length $s = r\theta$ (θ in radians). Differentiate with r constant: the point's speed is $v = r\omega$, and its tangential acceleration, the part along the circle that changes its speed, is $a_t = r\alpha$.

?Wait, what's centripetal acceleration again?
Anything moving in a circle has an acceleration toward the center, even at constant speed, because its velocity keeps changing direction. Its size is $a_c = \frac{v^2}{r}$ (Unit 2). With $v = r\omega$, that becomes $a_c = r\omega^2$.
$v$$2v$r2raxiscounterclockwisesame θ, ω, α everywherev = rω: double r, double v$a_c$ = rω²: double r,double $a_c$
Every point of a rigid disk turns through the same angle in the same time, so all points share θ, ω and α. A point twice as far out moves twice as fast.

So a point on a spinning object generally has two acceleration components at right angles: tangential $a_t = r\alpha$ (along the motion, from changing spin rate) and centripetal $a_c = r\omega^2$ (toward the axis, from going in a circle). The total is $a = \sqrt{a_t^2 + a_c^2}$. If the object spins at a steady rate, $\alpha = 0$ and only the centripetal part is left.

center$a_c = r\omega^2$$a_t = r\alpha$$a$speeding up and turning$a = \sqrt{a_t^2 + a_c^2}$not to scale
A rim point on a wheel that is speeding up counterclockwise. The tangential part points along the motion; the centripetal part points to the center. The total acceleration points between them.
A point on a potter's wheel
A potter's wheel of radius 0.15 m starts from rest with a constant angular acceleration of $4.0\ \text{rad/s}^2$. For a point on its rim at t = 1.5 s, find (a) the wheel's angular velocity, (b) the point's speed, (c) its tangential and centripetal accelerations, and (d) the size of its total acceleration.
  1. (a) $\omega = \alpha t = (4.0)(1.5) = 6.0\ \text{rad/s}$.
  2. (b) $v = r\omega = (0.15)(6.0) = 0.90\ \text{m/s}$.
  3. (c) $a_t = r\alpha = (0.15)(4.0) = 0.60\ \text{m/s}^2$ and $a_c = r\omega^2 = (0.15)(6.0)^2 = 5.4\ \text{m/s}^2$.
    Why?
    $a_t$ stays the same while α is constant, but $a_c$ grows with $\omega^2$. After a short time the centripetal part dominates.
  4. (d) $a = \sqrt{0.60^2 + 5.4^2} \approx 5.4\ \text{m/s}^2$, pointing about 6° away from the center, toward the direction of motion.
    Why?
    $\tan^{-1}(0.60/5.4) \approx 6.3^\circ$. The two components are perpendicular, so they add like the sides of a right triangle.

Answer: (a) 6.0 rad/s (b) 0.90 m/s (c) 0.60 m/s² and 5.4 m/s² (d) about 5.4 m/s².

Stuck? Get a hint
  1. Find ω first: constant α from rest.
  2. Multiply by r for v and $a_t$. For $a_c$, use $r\omega^2$.
  3. The two accelerations are perpendicular: combine with the Pythagorean theorem.
?Wait, why must ω be in rad/s in $v = r\omega$?
Because the formula comes from $s = r\theta$, which is the definition of a radian. In rev/s you'd need an extra $2\pi$: a wheel turning at 1 rev/s moves its rim $2\pi r$ every second, not r.

The same link shows up whenever a rope, belt or chain runs on a wheel without slipping. The rope moves at the speed of the rim: $v = R\omega$ and $a = R\alpha$. A bucket on a rope wound around a winch drum rises at the drum's rim speed. Two pulleys joined by a belt have the same rim speed, $r_1\omega_1 = r_2\omega_2$, so the smaller pulley spins faster.

Pause and think
A belt connects a small pulley (radius 5.0 cm) spinning at 30 rad/s to a large pulley (radius 15 cm). How fast does the large pulley spin?
I thought about it. Show me
The belt doesn't slip, so both rims move at the belt's speed: $(0.050)(30) = 1.5\ \text{m/s}$. The large pulley: $\omega = \frac{1.5}{0.15} = 10\ \text{rad/s}$. Three times the radius, one third the angular velocity.
Check yourself
A rope is wound around a winch drum of radius 0.10 m. The drum turns at 5.0 rad/s and lifts a bucket without the rope slipping. How fast does the bucket rise?
  1. A0.020 m/s
  2. B0.50 m/s
  3. C2.5 m/s
  4. D50 m/s
Show the answer

B. The rope moves at the rim speed: $v = R\omega = (0.10)(5.0) = 0.50\ \text{m/s}$. Choice D divides by R instead of multiplying, and choice C is the drum's centripetal acceleration, $R\omega^2$, in m/s².

  • Every point shares θ, ω and α. Linear quantities scale with r.
  • $v = r\omega$, $a_t = r\alpha$, $a_c = r\omega^2$, with angles in radians.
  • Total acceleration of a point: $\sqrt{a_t^2 + a_c^2}$.
  • No slipping: a rope or belt moves at the rim speed, $v = R\omega$, $a = R\alpha$.