3.5 PowerHow fast energy moves

Power is the rate at which energy is transferred or work is done:
$$P = \frac{dE}{dt} = \frac{dW}{dt}, \qquad P_{avg} = \frac{\Delta E}{\Delta t}$$
Its unit is the watt: $1\ \text{W} = 1\ \text{J/s}$. A 100 W bulb converts 100 joules every second it's on.
?Wait, is a kilowatt-hour power or energy?
For a force acting on a moving object, there's a handy form. In a short time $dt$, the force does work $dW = \vec F\cdot d\vec r$. Divide both sides by $dt$:
$$P = \frac{\vec F\cdot d\vec r}{dt} = \vec F\cdot\vec v = Fv\cos\theta$$
And going backward, work is the integral of power over time: $W = \int P\,dt$, the area under a power-versus-time graph.
- (a) Constant speed means zero net force, so the cable's tension equals the weight: $T = (800)(9.8) = 7840\ \text{N}$.
Why?
Power needs the force from the motor, and at constant velocity the second law gives it directly. - $P = Tv = (7840)(1.5) = 1.18\times10^4\ \text{W}$, about 11.8 kW. Every joule goes into gravitational potential energy, since K doesn't change.
- (b) Steady speed: the driving force equals the 600 N of resistance. $P = Fv = (600)(25) = 1.5\times10^4\ \text{W}$, or 15 kW.
Why?
The net power on the car is zero, but the engine still delivers 15 kW: drag takes it right back out as thermal energy in the air.
Answer: (a) about 11.8 kW (b) 15 kW
Stuck? Get a hint
- Constant speed means the motor's force balances the opposing forces.
- P = Fv with that force and the speed.
- Elevator: F = mg. Car: F = 600 N.
- (a) $a = \frac Fm = 2.0\ \text{m/s}^2$, so $v = 2.0t$ and $P = Fv = (4.0)(2.0t) = 8.0t$ watts.
Why?
A constant force on a speeding-up object delivers more and more power, because P depends on v. - (b) $W = \int_0^{3} 8.0t\,dt = 4.0t^2\big|_0^{3} = 36\ \text{J}$.
Why?
Work is the area under P(t): here a triangle, ½(3.0)(24) = 36 J. - Check: $v(3) = 6.0\ \text{m/s}$, so $\Delta K = \frac12(2.0)(6.0)^2 = 36\ \text{J}$. It matches.
Answer: (a) $P = 8.0t$ W (b) 36 J, equal to the change in kinetic energy.
Stuck? Get a hint
- Find v(t) first from a = F/m.
- P = Fv.
- Integrate P from 0 to 3 s, then compare with ½mv².
I thought about it. Show me
- A60 W
- B104 W
- C120 W
- D13 W
Show the answer
A. $P = Fv\cos\theta = (40)(3.0)\cos 60° = 60\ \text{W}$. Choice C forgets the angle. Choice B uses $\sin 60°$, which is the part of the force perpendicular to the motion, and that part does no work.
- $P = \frac{dE}{dt}$; average power $\frac{\Delta E}{\Delta t}$; 1 W = 1 J/s.
- $P = \vec F\cdot\vec v$: use the velocity, never a position or a distance.
- $W = \int P\,dt$: the area under P(t).
- Constant speed against resistance: the engine's power equals resistance times speed.