AP Physics C: Mechanics · Unit 3 lecture · Part 9 of 9 · 9 min
Unit 3 wrap-upPut it together
Mr. Thompkins
That's the energy toolkit. Let's put it on one page. Everything in Unit 3 is bookkeeping: forces move energy in or out by doing work, potential energy stores it, and power says how fast it moves.
Quantity
Expression
Notes
Kinetic energy
½mv²
Scalar, never negative
Work
∫F·dr
Area under F(x); sign from the angle
Spring PE
½kx²
x from the relaxed length
Gravity PE, near surface
mgy
Any zero you like
Gravity PE, far away
−GMm/r
Zero at infinity
Thermal energy from friction
$f_k$ d
d is the path length
Power
dE/dt = F·v
Work is the area under P(t)
Every energy expression in Unit 3, and the one thing to watch for in each.
?Wait, when should I use energy instead of forces?
Use energy when the question connects speeds and positions and doesn't ask about time or acceleration, especially with curvy paths or changing forces. Use forces (Newton's second law) when you need an acceleration, a time, or a specific force like a tension or a normal force. Many FRQs need both: energy for a speed, then forces for what happens at that point.
Three threads tie the unit together. First, work is an integral, $\int\vec F\cdot d\vec r$, and the work-energy theorem turns it into a speed. Second, conservative forces have potential energies, linked both ways: $\Delta U = -\int F\,dx$ and $F = -\frac{dU}{dx}$. Third, total energy is conserved, with friction moving some of it into thermal energy and external work moving it across the system's boundary.
Pause and think
Connect two topics: on a U(x) graph, where is the object's speed greatest, and how does that match the work-energy theorem?
I thought about it. Show me
Where $U$ is lowest, because $K = E - U$ is biggest there. That's also where $F = -\frac{dU}{dx} = 0$: before that point the force does positive work (speeding up), after it negative work (slowing down). The speed peaks exactly where the work switches sign, just like the force-graph walk at x = 7 m.
Traps that cost points
✕ Multiplying the final force by the distance when the force changes.
✓ Work is the area under F(x): integrate.
✕ Dropping the minus sign in $F = -\frac{dU}{dx}$ or in $\Delta U = -\int F\,dx$.
✓ Write the definition with its sign as your first line.
✕ Evaluating an integral at only the upper limit.
✓ F(b) − F(a), always both limits.
✕ Counting gravity twice: using Ug and the work done by gravity.
✓ Earth in the system: use Ug. Earth outside: use $W_{grav}$. Never both.
✕ Using mgh for a satellite or a rocket high above Earth.
✓ Use $-\frac{GMm}{r}$ when the height is not small compared with R.
✕ Mixing up turning points and equilibrium points.
✓ Turning point: K = 0. Equilibrium: F = 0.
✕ Using displacement for friction losses.
✓ Thermal energy is $f_k$ times the path length.
✕ Calling power force times distance.
✓ Force times distance is work. Power is force times velocity.
✕ Measuring spring energy from the wrong point.
✓ x is measured from the relaxed length.
Key relationships for Unit 3
$K = \tfrac12 mv^2$
Translational kinetic energyScalar; depends on speed squared
$W = \int\vec F\cdot d\vec r = \int F(x)\,dx$
WorkConstant force: Fd cos θ; graph: signed area
$W_{net} = \Delta K$
Work-energy theoremFrom F = m dv/dt
$\Delta U = -\int F\,dx,\quad F_x = -\frac{dU}{dx}$
Potential energy and forceConservative forces only
Name the system first, and say why energy is (or is not) conserved: no friction, no external work, or which force removes energy.
Write the energy equation in symbols for two well-chosen moments before you substitute numbers.
For variable forces, write W = ∫F dx with limits, or say "area under the graph" and show the shapes.
For U(x) graphs, mark minima, maxima and where E crosses U, then use F = −dU/dx with the sign.
Draw energy bar charts to scale when asked, and make the totals match your equation.
This unit feeds the Qualitative/Quantitative Translation and Mathematical Routines FRQs. A clean energy equation is the fastest path to several points at once.
1.5 kgrough: 1.0 m, μk = 0.40k = 600 N/m, 0.20 mfrictionlessfrictionless except the red patch
A spring launcher, a rough patch, and a frictionless ramp.
Mixed FRQ practice
In the figure, a 1.5 kg block is pressed against a spring ($k = 600\ \text{N/m}$) compressed 0.20 m and released. The floor is frictionless except for a 1.0 m rough patch with $\mu_k = 0.40$, after which a frictionless ramp rises. (a) Find the block's speed as it leaves the spring. (b) Find its speed after crossing the rough patch. (c) How high up the ramp does it go? (d) The block slides back and forth until it stops. Where does it stop?
(a) Spring to block: $\frac12 kx^2 = \frac12(600)(0.20)^2 = 12\ \text{J} = \frac12(1.5)v^2$, so $v = 4.0\ \text{m/s}$.
Why?
All the spring energy becomes kinetic energy on the frictionless floor.
The ramp is frictionless, so all the kinetic energy turns into gravitational energy.
(d) Each crossing of the patch removes 5.88 J. The 12 J total covers $\frac{12}{5.88} = 2.04$ patch lengths of sliding. So it crosses twice (toward the ramp, then back toward the spring), bounces off the spring with 0.24 J, and stops 0.04 m into its third crossing.
Why?
Friction depends on the total path length on the patch, so count crossings. The 0.24 J left after two crossings carries it only 0.24/5.88 = 0.04 m.
Answer: (a) 4.0 m/s (b) about 2.9 m/s (c) about 0.42 m (d) on the rough patch, about 0.04 m from its spring-side edge.
Stuck? Get a hint
Spring energy ½kx² becomes K on the smooth floor.
Each pass across the patch costs μk mg d = 5.88 J.
For (d), divide the total 12 J by 5.88 J per meter of patch.
Check yourself
A cart rolls without friction along a track. At point A it has 20 J of kinetic energy and 50 J of potential energy. At point B its potential energy is 35 J. What is its kinetic energy at B?
A5 J
B15 J
C35 J
D55 J
Show the answer
C. Total energy is $20 + 50 = 70\ \text{J}$ at A and stays 70 J. At B, $K = 70 - 35 = 35\ \text{J}$. Choice B is only the drop in potential energy, which forgets the 20 J the cart already had. Choice D adds A's kinetic energy to B's potential energy, which is not a conserved total.
Check yourself
A particle moves in a region where U(x) has a minimum at x = 3 m. The particle has just enough energy to reach x = 1 m and x = 5 m. Which statement is true at x = 1 m?
AIts speed and the force on it are both zero.
BIts speed is zero and the force on it points toward +x.
CIts speed is at a maximum and the force is zero.
DIts speed is zero and the force on it points toward −x.
Show the answer
B. x = 1 m is a turning point: K = 0, so the speed is zero. The force points downhill on the U graph, toward the minimum at 3 m, which is +x. Choice A mixes up a turning point with an equilibrium point.
Mr. Thompkins
That's Unit 3, and with it the first three units of mechanics. Take the Unit 3 quiz, then try the two FRQ walkthrough videos for this unit. Next is Unit 4, momentum: the other quantity that's conserved, and the one that handles collisions. See you there.