AP Physics C: Mechanics · Unit 2 lecture · Part 7 of 11 · 8 min

2.8 Spring forcesSprings push back in proportion

Mr. Thompkins
Springs are everywhere in this course: in car suspensions, in bathroom scales, in every oscillation of Unit 7. And they come with a lab question that shows up on the exam a lot: how would you measure a spring constant?

An ideal spring pulls or pushes back toward its relaxed length with a force proportional to how far you stretch or compress it. That's Hooke's law:

$$F_s = -k\Delta x$$

Here $\Delta x$ is the displacement from the relaxed length, and $k$ is the spring constant in N/m: how stiff the spring is. The minus sign says the force is restoring, it always points back toward equilibrium. Stretch to the right, the spring pulls left. Compress to the left, it pushes right.

?Wait, why do I need a best-fit line instead of just two data points?
Every measurement has some scatter. A best-fit line uses all of your data and averages the random errors out, while two points can be thrown off by a single bad reading. On the exam, "use the graph to determine k" means: draw a best-fit line and take its slope using two points on the line, far apart, not two data points.
00.020.040.060.080.10.120.140123456stretch x (m)force F (N)best fit: slope 40 N/m
Hanging masses from 0.10 to 0.50 kg stretch a spring. Force (mg) against stretch falls on a line through the origin. Its slope is the spring constant, about 40 N/m.
Measure k from data
A student hangs masses of 0.10, 0.20, 0.30, 0.40 and 0.50 kg from a spring and measures stretches of 2.4, 5.0, 7.3, 9.9 and 12.2 cm. (a) What should she graph to get a straight line whose slope is $k$? (b) Find $k$.
  1. (a) At equilibrium the spring force balances the weight: $kx = mg$. So graph the force $F = mg$ (vertical axis) against the stretch $x$ (horizontal axis). The slope is $k$.
    Why?
    Linearizing means choosing axes so the equation looks like y = (slope)x. Here F = kx already has that form.
  2. Convert the data: forces 0.98, 1.96, 2.94, 3.92, 4.90 N, stretches 0.024 to 0.122 m.
    Why?
    Use SI units before you take a slope, or k comes out in N/cm.
  3. (b) Draw the best-fit line and take its slope from two points on the line, say $(0, 0)$ and $(0.14\ \text{m}, 5.6\ \text{N})$: $k = \frac{5.6}{0.14} = 40\ \text{N/m}$.
    Why?
    A least-squares fit of the five points also gives 40 N/m. Using the line, not the raw points, is what graders look for.

Answer: (a) Graph mg against x. (b) $k \approx 40\ \text{N/m}$.

Stuck? Get a hint
  1. At equilibrium, the spring force equals the weight: kx = mg.
  2. Put mg on the vertical axis and x on the horizontal axis.
  3. Slope = rise over run on the best-fit line, in N/m.

Springs in parallel and in series

mparallel: same stretch$k_{eq} = k_1 + k_2$mseries: same force$\frac{1}{k_{eq}} = \frac{1}{k_1} + \frac{1}{k_2}$
Left: two springs side by side share the load. Right: two springs end to end each carry the full load.

Two springs side by side (in parallel) stretch by the same amount, and their forces add: $F = k_1x + k_2x$, so $k_{eq} = k_1 + k_2$. Stiffer. Two springs end to end (in series) each feel the full force, and their stretches add: $x = \frac{F}{k_1} + \frac{F}{k_2}$, so $\frac{1}{k_{eq}} = \frac{1}{k_1} + \frac{1}{k_2}$. Softer. With 200 N/m and 300 N/m springs, parallel gives 500 N/m and series gives 120 N/m.

?Wait, isn't that backward from resistors?
It is, if you've seen circuits. Resistors add in series and add as reciprocals in parallel. Springs do the opposite. Don't memorize it, rebuild it: in parallel the stretch is shared, so forces add; in series the force is shared, so stretches add.
Pause and think
You cut a spring of constant $k$ exactly in half. What is the spring constant of each half?
I thought about it. Show me
$2k$. The original spring is two halves in series: $\frac1k = \frac1{k_h} + \frac1{k_h}$, so $k_h = 2k$. It makes sense physically: under the same force, each half stretches only half as much.
Check yourself
Two identical springs, each with constant k, are hung end to end, and a mass m hangs from the bottom. How far does the pair stretch in total?
  1. A$\frac{mg}{2k}$
  2. B$\frac{mg}{k}$
  3. C$\frac{2mg}{k}$
  4. D$\frac{4mg}{k}$
Show the answer

C. In series, each spring carries the full weight and stretches $\frac{mg}{k}$, so the total is $\frac{2mg}{k}$. Equivalently, $k_{eq} = \frac k2$. Choice A is the parallel answer, where the springs share the load.

  • Hooke's law: $F_s = -k\Delta x$, restoring, proportional to the stretch.
  • Measure k: graph force against stretch and take the slope of the best-fit line.
  • Parallel: $k_{eq} = k_1 + k_2$. Series: $\frac{1}{k_{eq}} = \frac{1}{k_1} + \frac{1}{k_2}$.