AP Physics C: Mechanics · Unit 2 lecture · Part 8 of 11 · 9 min

2.9 Resistive forcesDrag and terminal velocity

Mr. Thompkins
A skydiver jumps. For the first few seconds she speeds up, but then something strange happens: she stops speeding up, even though gravity never turned off. The reason is a force that grows with speed. This is where Physics C really earns its calculus.

When an object moves through air or a liquid, the fluid pushes back with a resistive force, or drag. Drag always points opposite the velocity, and it gets bigger as the object goes faster. Two models are used:

Linear drag

  • $\vec F_D = -b\vec v$
  • b in kg/s
  • Small, slow objects in thick fluids: a bead in syrup, dust in air
  • The model you will solve with calculus

Quadratic drag

  • $F_D = cv^2$, opposite $\vec v$
  • c in kg/m
  • Larger, faster objects in air: a skydiver, a baseball
  • Terminal speed is fair game

Take an object falling from rest with linear drag, down positive. Only two forces act: gravity $mg$ down and drag $bv$ up. Newton's second law gives

$$m\frac{dv}{dt} = mg - bv$$

?Wait, what's a differential equation?
An equation that relates a function to its own derivative. Here the rate of change of $v$ depends on $v$ itself. You can't just integrate the right side over time, because you don't know $v(t)$ yet: that's what you're solving for. In Unit 1 you saw the simplest one, $\frac{dv}{dt} = -kv$.
$mg$
At release: v = 0, so no drag yet. a = g.
$mg$$bv$
Halfway to terminal speed: drag is half of mg, so a = g/2.
$mg$$bv$
At terminal speed: drag equals mg. Net force zero, a = 0.

Watch the story in those three diagrams. At release, drag is zero and the acceleration is $g$. As the speed grows, drag grows, the net force shrinks and the acceleration shrinks. Eventually drag matches gravity, the net force is zero, and the speed stops changing. That steady speed is the terminal velocity. Set $a = 0$:

?Wait, why is the acceleration zero at terminal velocity if gravity is still pulling?
Acceleration depends on the net force, not on any single force. At terminal velocity, drag up equals gravity down, so the net force is zero and, by the second law, $a = 0$. The object keeps moving (first law), it just stops speeding up.

$$mg - bv_T = 0 \quad\Rightarrow\quad v_T = \frac{mg}{b} \qquad\text{(quadratic drag: } v_T = \sqrt{mg/c}\text{)}$$

0481216200246810v (m/s)a (m/s²)$a = g - \frac{b}{m}v$a = g at release$v_T = 19.6$
For m = 0.50 kg and b = 0.25 kg/s, the acceleration falls in a straight line as the speed grows, from g at rest to zero at $v_T$ = 19.6 m/s.
Pause and think
Without solving anything, sketch $v(t)$ for this falling object. What is its slope at $t = 0$, what shape does it have, and where does it end up?
I thought about it. Show me
It starts at $v = 0$ with slope $g$ (no drag yet). The slope then shrinks steadily, so the curve is concave down. It approaches the horizontal line $v = v_T$ and never crosses it. You'll get the exact formula in the next section, but these three features are what graders check on a sketch.
Terminal speed reasoning
(a) A 0.50 kg ball falls through oil with linear drag, $b = 0.25\ \text{kg/s}$. Find its terminal speed and its acceleration when it's moving at half that speed. (b) An 80 kg skydiver has quadratic drag with $c = 0.25\ \text{kg/m}$. Find her terminal speed.
  1. (a) $v_T = \frac{mg}{b} = \frac{(0.50)(9.8)}{0.25} = 19.6\ \text{m/s}$.
    Why?
    Start from a = 0 at terminal speed: mg = $bv_T$. Units check: kg·m/s² divided by kg/s gives m/s.
  2. At $v = 9.8\ \text{m/s}$: $a = g - \frac{b}{m}v = 9.8 - \frac{0.25}{0.50}(9.8) = 4.9\ \text{m/s}^2$, which is $\frac g2$.
    Why?
    Linear drag means half the speed gives half of mg in drag, leaving half the net force. That only works for linear drag.
  3. (b) At terminal speed $mg = cv_T^2$, so $v_T = \sqrt{\frac{mg}{c}} = \sqrt{\frac{(80)(9.8)}{0.25}} = \sqrt{3136} = 56\ \text{m/s}$.
    Why?
    About 200 km/h. The square root comes from the v² in the drag force.

Answer: (a) 19.6 m/s, and 4.9 m/s² at half that speed (b) 56 m/s

Stuck? Get a hint
  1. Terminal speed means a = 0: set drag equal to mg.
  2. For the acceleration, a = (mg − bv)/m with v = 9.8 m/s.
  3. Quadratic drag: mg = cv², then take the square root.
Check yourself
Two balls of the same size and shape fall through syrup with linear drag (same b). Ball B has twice the mass of ball A. How do their terminal speeds compare?
  1. A$v_B = v_A$
  2. B$v_B = \sqrt2\,v_A$
  3. C$v_B = 2v_A$
  4. D$v_B = \frac{v_A}{2}$
Show the answer

C. $v_T = \frac{mg}{b}$ is proportional to mass, so doubling $m$ doubles $v_T$. Choice B would be right for quadratic drag, where $v_T = \sqrt{mg/c}$. Choice A is what you'd get without any drag at all, where everything falls together.

  • Drag points opposite the velocity and grows with speed: −bv (linear) or cv² (quadratic).
  • Falling with linear drag: $m\frac{dv}{dt} = mg - bv$, a differential equation.
  • Terminal velocity when a = 0: $v_T = \frac{mg}{b}$ (linear), $\sqrt{\frac{mg}{c}}$ (quadratic).
  • Shape of v(t): slope g at the start, concave down, levels off at $v_T$ without crossing it.