AP Physics C: Mechanics · Unit 1 lecture · Part 6 of 10 · 9 min

1.3 Representing motionOne story, three graphs

Mr. Thompkins
On the exam you'll get a graph and be asked for another graph, or a number, or a sentence. The good news: everything comes from two moves you already know. Slopes take you down the chain, areas take you up.

Here's a car leaving a stop sign. It speeds up at $+1.5\ \text{m/s}^2$ for 4.0 s, cruises for 3.0 s, then brakes at $-2.0\ \text{m/s}^2$ for 3.0 s and stops. Look at the three graphs together and read them top to bottom and bottom to top.

012345678910-3-2-1012t (s)a (m/s²)+1.5−2.0
Acceleration: three flat pieces. The area of each piece is the change in velocity: +6, 0, −6 m/s.
01234567891002468t (s)v (m/s)12 m18 m9 m
Velocity: the slope of each piece is the acceleration. The areas, 12 + 18 + 9, give 39 m.
012345678910010203040t (s)x (m)curves upstraight39 m
Position: curves upward while speeding up, straight while cruising, curves downward while braking.

The slope of $x(t)$ is $v$, so the position graph gets steeper while the car speeds up and flattens as it stops. The slope of $v(t)$ is $a$. Going the other way, the area under $a(t)$ is $\Delta v$ and the area under $v(t)$ is $\Delta x$. And one more reading skill: the concavity of $x(t)$ is the sign of $a$. Curving up, like a cup, means $a > 0$. Curving down, like a frown, means $a < 0$. A straight line means $a = 0$.

?Wait, what do concave up and concave down mean again?
A curve is concave up when its slope is increasing (it bends upward like a cup) and concave down when its slope is decreasing (it bends like a frown). For $x(t)$, the slope is $v$, so concave up means $v$ is increasing, which means $a > 0$. Mathematically, the sign of the second derivative $\frac{d^2x}{dt^2}$ tells you the concavity.

You can also go from a position graph down to an acceleration graph without any formulas. Sketch the slope of $x(t)$ at a handful of times to get $v(t)$, then sketch the slope of that to get $a(t)$. Where $x(t)$ is a straight line, $v$ is constant and $a$ is zero. Where $x(t)$ has a sharp corner, $v$ jumps, which would need an infinite acceleration, so real motion never has corners in $x(t)$.

?Wait, how do I find the area of a triangle and a trapezoid?
Triangle: $\frac12 \times \text{base} \times \text{height}$. Trapezoid: $\frac12(\text{height}_1 + \text{height}_2) \times \text{width}$. On a velocity graph, "height" is a velocity and "base" is a time, so the area comes out in meters.
Pause and think
On a velocity graph, the line crosses the time axis at some instant. What does the position graph look like at that same instant?
I thought about it. Show me
It's flat there: a peak or a valley, a turning point. Velocity is zero, so the slope of $x(t)$ is zero. The object stops for an instant and reverses.
Read a velocity graph
A cart's velocity is shown: it falls steadily from +4.0 m/s at $t = 0$ to −4.0 m/s at $t = 4.0\ \text{s}$, then stays at −4.0 m/s until 6.0 s. It starts at $x = 1.0\ \text{m}$. Find (a) its acceleration from 0 to 4 s, (b) when it turns around, (c) its displacement and distance from 0 to 6 s, and (d) where it ends up.
0123456-5-4-3-2-1012345t (s)v (m/s)
The cart: blue area is forward, red area is backward.
  1. (a) Slope: $a = \frac{\Delta v}{\Delta t} = \frac{-4.0 - 4.0}{4.0} = -2.0\ \text{m/s}^2$.
    Why?
    A straight-line velocity graph means constant acceleration, equal to its slope.
  2. (b) It turns around where $v = 0$, halfway down the line: $t = 2.0\ \text{s}$.
  3. (c) Areas: 0 to 2 s, triangle $\frac12(2.0)(4.0) = +4.0\ \text{m}$. 2 to 4 s, triangle $-4.0\ \text{m}$. 4 to 6 s, rectangle $(2.0)(-4.0) = -8.0\ \text{m}$.
    Why?
    Areas below the axis are negative displacements. Keep the sign on each piece.
  4. Displacement $= 4.0 - 4.0 - 8.0 = -8.0\ \text{m}$. Distance $= 4.0 + 4.0 + 8.0 = 16\ \text{m}$.
  5. (d) $x_f = x_0 + \Delta x = 1.0 + (-8.0) = -7.0\ \text{m}$.
    Why?
    The area gives a change. The starting position turns it into a position, exactly like the + C in an integral.

Answer: (a) −2.0 m/s² (b) 2.0 s (c) displacement −8.0 m, distance 16 m (d) x = −7.0 m

Stuck? Get a hint
  1. Acceleration is the slope of the velocity line.
  2. It turns around where the line crosses v = 0.
  3. Split the area into pieces at t = 2 s and t = 4 s. Keep signs for displacement, drop them for distance.
Check yourself
A position-versus-time graph is curving downward (concave down) while its slope is still positive. Which describes the motion?
  1. AMoving in +x and speeding up
  2. BMoving in +x and slowing down
  3. CMoving in −x and speeding up
  4. DMoving in −x and slowing down
Show the answer

B. Positive slope means $v > 0$. Concave down means $a < 0$. Opposite signs: slowing down. Choice A reads the slope correctly but ignores the curvature, which is the acceleration.

Exam tip from Mr. T

When you sketch several graphs of one motion, line them up in time. Every zero of $v$ must sit exactly under a flat spot of $x$, and every change in $a$ must sit under a corner or a change in curvature of $v$. Graders check that the graphs agree with each other, not just that each one looks reasonable.

  • Slope of x(t) is v. Slope of v(t) is a.
  • Area under v(t) is Δx. Area under a(t) is Δv. Below the axis counts negative.
  • Concave up x(t): a > 0. Concave down: a < 0. Straight: a = 0.
  • A zero crossing of v(t) is a flat turning point on x(t).