1.2 When acceleration depends on velocity or positionWhen a depends on v or on x

Tool 1: separate the variables
Suppose a puck slides through slush with $a = -kv$: the faster it goes, the harder the slush slows it. Now you can't just integrate $a$ over time, because you don't know $v(t)$ yet. That's the whole point. The trick is to get every $v$ on one side and every $t$ on the other:
$$\frac{dv}{dt} = -kv \quad\Rightarrow\quad \frac{dv}{v} = -k\,dt \quad\Rightarrow\quad \int_{v_0}^{v}\frac{dv}{v} = -k\int_0^t dt \quad\Rightarrow\quad \ln\frac{v}{v_0} = -kt$$
So $v = v_0e^{-kt}$. An equation like $\frac{dv}{dt} = -kv$, which links a quantity to its own rate of change, is a differential equation. You'll solve the full version, with gravity and drag together, in Unit 2.
Look at the shape of that answer, because you'll see it again. The speed doesn't drop by the same amount every second. It drops by the same fraction every second: each 2 s here, it falls to about 37 percent of what it was. The faster the puck goes, the faster it slows. That's the signature of any rate that's proportional to the quantity itself, and it's exactly how air drag behaves at low speeds.
?Wait, what are $\ln$ and $e$ again?
I thought about it. Show me
- (a) $\frac{dv}{dt} = -0.50v$, so $\frac{dv}{v} = -0.50\,dt$. Integrate from $(0, 8.0)$ to $(t, v)$: $\ln\frac{v}{8.0} = -0.50t$, so $v = 8.0e^{-0.50t}$.
Why?
Use matching limits on both sides: v runs from 8.0 to v while t runs from 0 to t. Then no +C is needed. - (b) $2.0 = 8.0e^{-0.50t}$, so $e^{-0.50t} = 0.25$ and $t = \frac{\ln 4}{0.50} = 2.8\ \text{s}$.
Why?
Take ln of both sides: −0.50t = ln 0.25 = −ln 4. - (c) $x = \int_0^{t} 8.0e^{-0.50t}\,dt = \frac{8.0}{0.50}\left(1 - e^{-0.50t}\right) = 16(1 - 0.25) = 12\ \text{m}$.
Why?
Notice the shortcut hiding in this: x = (v₀ − v)/k. The distance depends only on how much speed was lost.
Answer: (a) $v = 8.0e^{-0.50t}$ (b) about 2.8 s (c) 12 m
Stuck? Get a hint
- Get all the v terms on one side: dv/v = −0.50 dt.
- The integral of dv/v is ln v. Use limits 8.0 to v and 0 to t.
- For the distance, integrate v(t) from 0 to 2.77 s.
Tool 2: the chain rule, when you know v as a function of x
Sometimes you know velocity as a function of position, $v(x)$, and you want the acceleration. Use the chain rule: $a = \frac{dv}{dt} = \frac{dv}{dx}\frac{dx}{dt} = v\frac{dv}{dx}$. You'll see this again when we connect forces to energy in Unit 3.
?Wait, what's the chain rule?
- A$\frac{3}{\sqrt x}\ \text{m/s}^2$
- B$18\ \text{m/s}^2$
- C$36\ \text{m/s}^2$
- D$6\ \text{m/s}^2$
Show the answer
B. $a = v\frac{dv}{dx} = 6\sqrt{x}\cdot\frac{3}{\sqrt{x}} = 18\ \text{m/s}^2$, the same everywhere. Check: $v^2 = 36x$ matches $v^2 = 2ax$ with $a = 18$. Choice A is only $\frac{dv}{dx}$, which forgets to multiply by $v$.
- If $a$ depends on $v$: separate, $\frac{dv}{a(v)} = dt$, and integrate both sides with matching limits.
- $a = -kv$ gives $v = v_0e^{-kt}$: never zero, but the total distance is $\frac{v_0}{k}$.
- If you know $v(x)$: $a = v\frac{dv}{dx}$.