1.2 Displacement, velocity and accelerationVelocity is a slope, acceleration is a slope of a slope

Average velocity over an interval is $\frac{\Delta x}{\Delta t}$. On a graph of position against time, that's the slope of the straight line joining two points on the curve, called a secant line. Now shrink the interval. As $\Delta t$ gets smaller and smaller, the secant line turns into the tangent line at a single instant, and its slope is the instantaneous velocity:
$$v = \lim_{\Delta t \to 0}\frac{\Delta x}{\Delta t} = \frac{dx}{dt}$$
?Wait, how do I take a derivative again?
Acceleration is the rate of change of velocity, so it's the derivative of velocity, which makes it the second derivative of position: $a = \frac{dv}{dt} = \frac{d^2x}{dt^2}$. Its unit is m/s per second, written $\text{m/s}^2$. Going from position to velocity to acceleration, you always differentiate. I call this "going down the chain".
Here's an idea people get wrong all the time. Velocity tells you which way the object is moving. Acceleration tells you which way its velocity is changing. They don't have to agree. When $v$ and $a$ have the same sign, the object speeds up. When they have opposite signs, it slows down. Negative acceleration does not automatically mean slowing down.
Speeding up
- $v > 0$ and $a > 0$
- $v < 0$ and $a < 0$
- Velocity and acceleration point the same way
Slowing down
- $v > 0$ and $a < 0$
- $v < 0$ and $a > 0$
- Velocity and acceleration point opposite ways
I thought about it. Show me
- (a) $v = \frac{dx}{dt} = 6t^2 - 30t + 24$ and $a = \frac{dv}{dt} = 12t - 30$.
Why?
Start from the definitions in symbols. On an FRQ, writing v = dx/dt before differentiating is often worth a point by itself. - (b) Set $v = 0$: $6(t^2 - 5t + 4) = 6(t - 1)(t - 4) = 0$, so $t = 1\ \text{s}$ and $t = 4\ \text{s}$.
Why?
Factor out the 6 first. It makes the quadratic easy to factor. - Plug into $x(t)$: $x(1) = 2 - 15 + 24 = 11\ \text{m}$ and $x(4) = 128 - 240 + 96 = -16\ \text{m}$.
Why?
These are the turning points: the farthest out the particle gets before it reverses. - (c) Find where $a$ changes sign: $12t - 30 = 0$ at $t = 2.5\ \text{s}$. So $a < 0$ before 2.5 s and $a > 0$ after.
Why?
You need the sign of both v and a on every interval, so find every place where either one is zero. - Make a sign table. $0 < t < 1$: $v > 0$, $a < 0$, slowing. $1 < t < 2.5$: $v < 0$, $a < 0$, speeding up. $2.5 < t < 4$: $v < 0$, $a > 0$, slowing. $t > 4$: $v > 0$, $a > 0$, speeding up.
Why?
A short table like this is exactly what earns the justification point: it shows you compared the signs, not guessed.
Answer: (a) $v = 6t^2 - 30t + 24$, $a = 12t - 30$. (b) At rest at $t = 1\ \text{s}$ ($x = 11\ \text{m}$) and $t = 4\ \text{s}$ ($x = -16\ \text{m}$). (c) Speeding up for $1 < t < 2.5\ \text{s}$ and for $t > 4\ \text{s}$.
Stuck? Get a hint
- Write v = dx/dt and a = dv/dt, then use the power rule on each term.
- Factor 6 out of the velocity: what is left is t² − 5t + 4.
- For (c), list the zeros of v (1 s and 4 s) and of a (2.5 s), then check the signs between them.
?Wait, what are the derivatives of sine and cosine?
- AMoving in +x and speeding up
- BMoving in +x and slowing down
- CMoving in −x and speeding up
- DAt rest with zero acceleration
Show the answer
B. $v = 8t - 3t^2$ gives $v(2) = 16 - 12 = +4\ \text{m/s}$, and $a = 8 - 6t$ gives $a(2) = -4\ \text{m/s}^2$. Opposite signs mean slowing down. Choice A is the top trap: it looks only at the velocity and forgets to compare the sign of the acceleration.
- $v = \frac{dx}{dt}$: the slope of the position graph. $a = \frac{dv}{dt} = \frac{d^2x}{dt^2}$: the slope of the velocity graph.
- Average velocity is a secant slope. Instantaneous velocity is a tangent slope.
- Turning points: set $v = 0$. At a turning point the acceleration usually isn't zero.
- Speeding up: v and a have the same sign. Slowing down: opposite signs.