AP Physics C: Mechanics · Unit 1 lecture · Part 1 of 10 · 7 min

1.1 Scalars and vectors in one dimensionHow much, and which way

By the end: Describe any one- or two-dimensional motion with calculus: differentiate position to get velocity and acceleration, integrate acceleration with initial conditions to get velocity and position, read and sketch motion graphs, add relative velocities, and solve projectile problems the way the AP exam scores them.
Mr. Thompkins
Hi, I'm Mr. T, and welcome to Physics C. Quick puzzle to start: your phone says you walked 18 meters today in a hallway, but you ended up only 6 meters from where you started. Both numbers are right. By the end of this section you'll know exactly why, and why physics needs both.

Physics describes the world with two kinds of quantities. A scalar has only a size, a number with a unit: a mass of 2.0 kg, a time of 3.0 s, a distance of 18 m. A vector has a size and a direction: a displacement of 6 m to the east, a velocity of 3 m/s downward. You can't fully describe a vector without saying which way it points.

Why does physics bother with both? Because nature cares about direction. Two people pushing a stalled car with 300 N each move it well if they push the same way and not at all if they push against each other. A plane that flies 200 km has gone somewhere very different depending on its heading. Every time a quantity has a direction that matters, it's a vector, and in this course that includes displacement, velocity, acceleration, force and momentum.

In one dimension, along a straight line, the direction is just a sign. You pick which way is positive, usually right or up, and stick to it for the whole problem. Then a velocity of $-3\ \text{m/s}$ means 3 m/s in the negative direction. In unit-vector notation you might also see it written $\vec v = -3\,\hat i\ \text{m/s}$, where $\hat i$ is a vector of length 1 pointing in the $+x$ direction.

Scalar (size only)Vector (size and direction)In one dimension
DistanceDisplacementDisplacement has a sign
SpeedVelocitySpeed is the size of velocity
Time, massAccelerationSign tells which way it points
Average speedAverage velocityThey differ if the object turns around
Scalars and their vector partners. In one dimension, the vector version carries a sign.
?Wait, what does the $\Delta$ mean again?
$\Delta$ (the Greek capital delta) means "change in", and it's always final minus initial. So $\Delta x = x_f - x_i$. If you start at $x = 4\ \text{m}$ and end at $x = 10\ \text{m}$, then $\Delta x = 10 - 4 = +6\ \text{m}$. If you go the other way, it's $-6\ \text{m}$.

Position $x$ is where an object is, measured from an origin you choose. Displacement $\Delta x = x_f - x_i$ is the change in position: a vector, so it can be negative. Distance is the total length of the path traveled: a scalar, never negative. They're equal only if the object never turns around.

024681012141618x (m)leg 1: +12 mleg 2: −6 mdisplacement +6 mstartenddistance = 12 + 6 = 18 m
A robot rolls from x = 4 m to x = 16 m, then back to x = 10 m. Its displacement is +6 m, but it traveled 18 m.

The same split shows up for rates. Average velocity is displacement over time, $v_{avg} = \frac{\Delta x}{\Delta t}$: a vector with a sign. Average speed is distance over time: a scalar, never negative. For the robot, they're different numbers, and the exam loves to check whether you know which one a question asks for.

?Wait, what's absolute value?
The absolute value $|x|$ is the size of a number without its sign: $|-6| = 6$ and $|6| = 6$. Speed is the absolute value of velocity, and the length of each leg of a trip is the absolute value of its displacement.
Pause and think
Can an object's average speed ever be smaller than the size of its average velocity? Think about it before you peek.
I thought about it. Show me
No. The distance traveled is always at least as big as the size of the displacement, because the straight line between start and end is the shortest possible path. So average speed $\ge |v_{avg}|$, with equality only when the object never reverses.
Average velocity versus average speed
The robot in the figure takes 8.0 s for leg 1 (from $x = 4.0\ \text{m}$ to $x = 16\ \text{m}$) and 4.0 s for leg 2 (back to $x = 10\ \text{m}$). Find (a) its displacement, (b) the distance it travels, (c) its average velocity, and (d) its average speed for the whole trip.
  1. (a) $\Delta x = x_f - x_i = 10 - 4.0 = +6.0\ \text{m}$.
    Why?
    Displacement only cares about where you started and where you ended, not the path in between.
  2. (b) Add the size of each leg: $|16 - 4| + |10 - 16| = 12 + 6.0 = 18\ \text{m}$.
    Why?
    Distance never subtracts. The backward leg still adds to the total path.
  3. (c) $v_{avg} = \frac{\Delta x}{\Delta t} = \frac{+6.0\ \text{m}}{12\ \text{s}} = +0.50\ \text{m/s}$.
    Why?
    The total time is 8.0 + 4.0 = 12 s. The plus sign says the overall motion was in the +x direction.
  4. (d) Average speed $= \frac{18\ \text{m}}{12\ \text{s}} = 1.5\ \text{m/s}$.
    Why?
    Three times bigger than the average velocity, because the robot spent a third of its path undoing progress.

Answer: (a) +6.0 m (b) 18 m (c) +0.50 m/s (d) 1.5 m/s

Stuck? Get a hint
  1. Write the start and end positions first. Displacement uses only those two.
  2. For distance, find each leg on its own and add the sizes.
  3. Both averages divide by the same total time, 12 s.
Check yourself
A cart starts at $x = +3.0\ \text{m}$, moves to $x = +7.0\ \text{m}$, then moves to $x = -5.0\ \text{m}$. What is its displacement?
  1. A$+8.0\ \text{m}$
  2. B$-8.0\ \text{m}$
  3. C$-2.0\ \text{m}$
  4. D$16\ \text{m}$
Show the answer

B. $\Delta x = x_f - x_i = -5.0 - 3.0 = -8.0\ \text{m}$. Choice D is the distance, 4.0 m out plus 12 m back. Choice A has the right size but loses the sign, and in one dimension the sign is the direction.

  • A scalar has a size. A vector has a size and a direction. In one dimension, the direction is a sign.
  • Displacement $\Delta x = x_f - x_i$ can be negative. Distance is the total path length and can't.
  • Average velocity $= \frac{\Delta x}{\Delta t}$. Average speed $= \frac{\text{distance}}{\Delta t}$. They differ when the object turns around.
  • Choose a positive direction at the start of every problem and write it down.