AP Physics C: E&M · Unit 9 lecture · Part 7 of 10 · 8 min

9.2 Field from potentialFrom potential to field: take the slope

Mr. Thompkins
Integrals take you from E to V. Derivatives take you back. This is the relationship the exam tests with graphs: hand you V against x, ask for E. Once you see it as "E is the downhill slope", you'll read these graphs at a glance.

Flip $dV = -\vec E\cdot d\vec r$ around. Along the x direction:

$$E_x = -\frac{dV}{dx}$$

In words: the field component along x is the negative slope of V against x. Where V is steep, the field is strong. Where V is flat, the field component is zero. The minus sign says the field points toward decreasing potential.

?Wait, how do I read a slope from a graph?
Slope is rise over run: $\frac{\Delta V}{\Delta x}$ between two points on a straight segment, or the slope of the tangent line at a point on a curve. Units: volts per meter.
00.10.20.30.40.50.6-40-200204060$x$ (m)$V$ (V)
V against x in three straight pieces.
00.10.20.30.40.50.6-300-200-1000100200300400$x$ (m)$E_x$ (V/m)−2000+300
The field: minus the slope of each piece.
Field from a graph of V
The potential along the x-axis is shown in the graph: it rises from 0 to 40 V between $x = 0$ and 0.20 m, stays at 40 V until 0.40 m, then drops to $-20$ V at 0.60 m. (a) Find $E_x$ in each region. (b) Find the force on an electron at $x = 0.50$ m.
  1. Region 1 (0 to 0.20 m): slope $= \frac{40 - 0}{0.20} = 200$ V/m, so $E_x = -200$ V/m (pointing in $-x$).
  2. Region 2 (0.20 to 0.40 m): slope 0, so $E_x = 0$.
    Why?
    V is constant, but not zero. A flat potential means no field, whatever its value.
  3. Region 3 (0.40 to 0.60 m): slope $= \frac{-20 - 40}{0.20} = -300$ V/m, so $E_x = +300$ V/m.
  4. (b) $F_x = qE_x = (-1.6 \times 10^{-19})(300) = -4.8 \times 10^{-17}$ N: pointing in $-x$, toward higher potential.
    Why?
    Electrons are pushed toward higher V, which is to the left here (V rises going left).

Answer: (a) $-200$ V/m, 0, $+300$ V/m. (b) $4.8 \times 10^{-17}$ N in the $-x$ direction.

Stuck? Get a hint
  1. Slope = ΔV/Δx for each straight piece.
  2. E is minus the slope.
  3. An electron feels a force opposite E.
?Wait, what's the power rule for derivatives?
$\frac{d}{dx}x^n = nx^{n-1}$, and constants multiply through. So $\frac{d}{dx}(6x^2) = 12x$ and $\frac{d}{dx}(4x^3) = 12x^2$.
Field from a formula
In a region, $V(x) = 6x^2 - 4x^3$ (V in volts, x in meters). (a) Find $E_x(x)$. (b) Evaluate it at $x = 0.50$ m and $x = 1.5$ m. (c) Where is $E_x = 0$? (d) Find the force on a $+2.0\ \mu$C charge at $x = 1.5$ m.
  1. (a) $E_x = -\frac{dV}{dx} = -(12x - 12x^2) = 12x^2 - 12x$ (V/m).
  2. (b) At 0.50 m: $E_x = 12(0.25) - 12(0.50) = -3.0$ V/m. At 1.5 m: $E_x = 27 - 18 = +9.0$ V/m.
  3. (c) $12x(x - 1) = 0$ at $x = 0$ and $x = 1.0$ m. Those are where V has a minimum and a maximum.
    Why?
    Flat spots of V (zero slope) are exactly the points where the field vanishes.
  4. (d) $F = qE_x = (2.0 \times 10^{-6})(9.0) = 1.8 \times 10^{-5}$ N in $+x$.

Answer: (a) $E_x = 12x^2 - 12x$. (b) $-3.0$ V/m and $+9.0$ V/m. (c) $x = 0$ and $x = 1.0$ m. (d) $1.8 \times 10^{-5}$ N in $+x$.

Pause and think
At a certain point, $V = 0$. Must the field there be zero?
I thought about it. Show me
No. The field depends on the slope of V, not its value. At the midpoint of a dipole, V = 0 but the field is strong, because V is changing quickly there (from positive near + to negative near −).
Check yourself
A graph of V against x is a straight line sloping upward with slope 50 V/m. What is the electric field?
  1. A50 V/m in +x
  2. B50 V/m in −x
  3. CZero, because V is changing uniformly
  4. DIt depends on the value of V
Show the answer

B. $E_x = -dV/dx = -50$ V/m: 50 V/m pointing in $-x$, toward lower potential. The trap is dropping the minus sign.

Check yourself
Along the x-axis, where on a graph of V(x) is the electric field strongest?
  1. AWhere V is largest
  2. BWhere V is zero
  3. CWhere the graph is steepest
  4. DWhere the graph is flat
Show the answer

C. The size of E is the size of the slope. A large V with a flat graph means zero field. A flat graph is where E = 0.

  • $E_x = -dV/dx$: field = negative slope of V.
  • Steep V: strong field. Flat V: zero field (whatever V is).
  • E points toward lower potential. Electrons are pushed toward higher potential.
  • Max and min of V(x) are where $E_x$ = 0.