AP Physics C: E&M · Unit 9 lecture · Part 6 of 10 · 9 min

9.2 Potential difference from the fieldFrom field to potential: integrate

Mr. Thompkins
So far we built V from charges. But often you already know the field, from Gauss's law, say. Then there's a direct road from E to V, and it's an integral.

Moving a test charge $q_0$ through a small displacement $d\vec r$, the field does work $q_0\vec E\cdot d\vec r$, so its potential energy changes by $-q_0\vec E\cdot d\vec r$. Divide by $q_0$:

$$\Delta V = V_B - V_A = -\int_A^B\vec E\cdot d\vec r$$

The minus sign carries the physics: moving along the field, V drops. Field lines point "downhill" in potential. Because the electric force is conservative, any path from A to B gives the same answer, so choose the easiest one.

?Wait, what does $\vec E\cdot d\vec r$ mean on a path?
It's the component of the field along your step times the length of the step. Step along the field: $+E\,dr$. Step against it: $-E\,dr$. Step perpendicular to it: zero. That last fact is why equipotentials are perpendicular to field lines.

Uniform field

In a uniform field E, moving a distance d along the field: $\Delta V = -Ed$. This is how you get V between parallel plates, and why the field has units of volts per meter: $E = \Delta V/d$ in size.

Pause and think
Between two parallel plates, $E = 400$ V/m. Point B is 0.25 m from point A, measured along the field. Which point is at higher potential, and by how much?
I thought about it. Show me
A is higher, by $Ed = (400)(0.25) = 100$ V. Moving along the field always lowers the potential.

Spherical charge

Outside any spherically symmetric charge Q, $E = kQ/r^2$. Integrate in from infinity (where V = 0): $V(r) = -\int_\infty^r\frac{kQ}{r'^2}dr' = \frac{kQ}{r}$. Inside, you need the inside field. For a uniform insulating ball, $E = kQr/R^3$, so starting from the surface value $V(R) = kQ/R$:

$$V(r) = \frac{kQ}{R} - \int_R^r\frac{kQr'}{R^3}dr' = \frac{kQ}{R} + \frac{kQ}{2R^3}(R^2 - r^2) = \frac{kQ(3R^2 - r^2)}{2R^3}$$

?Wait, how do I integrate $r\,dr$?
$\int r\,dr = \tfrac{1}{2}r^2$. So $\int_R^r r'\,dr' = \tfrac{1}{2}(r^2 - R^2)$. The minus sign in front of the integral flips it to $\tfrac{1}{2}(R^2 - r^2)$.
00.050.10.150.20.250.302004006008001000$r$ (m)$V$ (V)inside: a parabola$kQ/r$810 V540 Vsurface
Potential of a uniform ball (Q = 6.0 nC, R = 0.10 m). Inside it's a downward parabola, highest at the center; outside it falls as 1/r. V is continuous everywhere, and its slope is continuous at the surface too.
Potential at the center of a charged ball
An insulating ball of radius 0.10 m holds 6.0 nC uniformly. Find the potential (a) at the surface and (b) at the center. (c) How much work is needed to move a $+1.0$ nC charge slowly from the surface to the center?
  1. (a) $V(R) = \frac{kQ}{R} = \frac{(9.0 \times 10^9)(6.0 \times 10^{-9})}{0.10} = 540$ V.
  2. (b) $V(0) = \frac{kQ(3R^2)}{2R^3} = \frac{3}{2}\frac{kQ}{R} = 810$ V.
    Why?
    The field inside points outward, so moving inward is moving against the field, and V rises.
  3. (c) $W = q\Delta V = (1.0 \times 10^{-9})(810 - 540) = 2.7 \times 10^{-7}$ J.

Answer: (a) 540 V. (b) 810 V. (c) $2.7 \times 10^{-7}$ J.

Stuck? Get a hint
  1. Outside and at the surface, the ball acts like a point charge.
  2. V(0) = (3/2) kQ/R for a uniform ball.
  3. Work = q times the change in V.
Pause and think
The graph of V against r for the uniform ball is smooth at the surface, with no corner. What does a smooth V curve tell you about E there?
I thought about it. Show me
E is the negative slope of V. No corner means the slope doesn't jump, so E is continuous at the surface. That matches Unit 8: there's no surface charge at r = R, so E has no reason to jump.

Long line of charge

For a long line, $E = 2k\lambda/r$. Between distances $r_1$ and $r_2$: $V(r_2) - V(r_1) = -\int_{r_1}^{r_2}\frac{2k\lambda}{r}dr = -2k\lambda\ln\frac{r_2}{r_1}$. You can't set V = 0 at infinity for an infinite line (the log blows up), so only differences make sense. You'll use this for cylindrical capacitors in Unit 10.

Line charge
A long wire carries 3.0 nC/m. What is the potential difference between a point 1.0 cm from the wire and a point 2.0 cm from it? Which is higher?
  1. $|\Delta V| = 2k\lambda\ln\frac{r_2}{r_1} = 2(9.0 \times 10^9)(3.0 \times 10^{-9})\ln 2 = 54(0.693) = 37$ V.
  2. The field points away from the positive wire, so moving outward is moving along E, and V drops. The point at 1.0 cm is higher.

Answer: 37 V, with the nearer point (1.0 cm) at the higher potential.

Check yourself
Inside a thin spherical shell of radius R carrying charge Q (uniformly), what is the potential?
  1. AZero everywhere inside
  2. B$kQ/R$ everywhere inside
  3. C$kQ/r$, growing toward the center
  4. DIt decreases toward the center
Show the answer

B. Inside the shell E = 0, so V doesn't change from its surface value $kQ/R$. Zero field means constant potential, not zero potential.

  • $\Delta V = -\int\vec E\cdot d\vec r$. Along the field, V drops.
  • Uniform field: $|\Delta V| = Ed$. Units: V/m = N/C.
  • Outside spherical charge: $V = kQ/r$. Inside a uniform ball: $V = kQ(3R^2 - r^2)/(2R^3)$, with $V(0) = 1.5\,kQ/R$.
  • Line: $\Delta V = -2k\lambda\ln(r_2/r_1)$.
  • Zero field in a region means constant V there.