AP Physics C: E&M · Unit 9 lecture · Part 8 of 10 · 8 min

9.2 Equipotential surfacesMaps of equal potential

Mr. Thompkins
A hiking map draws lines of equal height. Where they crowd together, the trail is steep. Equipotential maps are the same idea for charge, and once you can read one, you can find field directions, field strengths and work without a single equation.

An equipotential surface is a surface where V has the same value everywhere. In a flat drawing it appears as a line. Four rules:

  1. Moving a charge along an equipotential takes no work: $W = q\Delta V = 0$.
  2. Field lines cross equipotentials at right angles. If E had a component along the surface, moving along it would take work.
  3. The field points from higher to lower potential.
  4. Where equipotentials (drawn at equal ΔV steps) are close together, the field is strong: $E \approx \Delta V/\Delta s$.
?Wait, what were the rules for field lines?
From Unit 8: field lines start on positive charges and end on negative charges, never cross, and crowd together where the field is strong. Now add one more: they always cross equipotentials at 90°.
$V_0$$2V_0$$3V_0$$4V_0$equal ΔV stepscrowd near the charge
A positive point charge. Equipotentials are circles. Drawn at equal steps in V, they crowd together near the charge, where the field is strongest.
V = 0V > 0V < 0
A dipole. Field lines (red) and equipotentials (green dashed) cross at right angles everywhere. The plane halfway between the charges is at V = 0.
Pause and think
Why are equipotentials around a point charge circles with uneven spacing, while those in a uniform field are evenly spaced parallel lines?
I thought about it. Show me
Around a point charge, $V = kq/r$, so equal steps in V need radii $r = kq/V$ that bunch up at small r, where the field is strong. In a uniform field, $\Delta V = -Ed$ with E constant, so equal steps in V need equal steps in distance.
100 V80 V60 V40 V20 V$\vec E$ABlines 5.0 cm apartE points to lower V
A uniform field with equipotentials every 20 V, spaced 5.0 cm apart. The field points from 100 V toward 20 V.
Reading an equipotential map
In the uniform field shown, the equipotentials are 20 V apart and 5.0 cm apart. Point A lies halfway between the 100 V and 80 V lines; point B lies halfway between the 40 V and 20 V lines (and lower on the page). (a) Find E. (b) Find $V_B - V_A$. (c) How much work does the field do on an electron moving from A to B? (d) Does the path matter?
  1. (a) $E = \frac{\Delta V}{\Delta s} = \frac{20\ \text{V}}{0.050\ \text{m}} = 400$ V/m, pointing to the right (toward lower V).
  2. (b) $V_A = 90$ V and $V_B = 30$ V, so $V_B - V_A = -60$ V.
    Why?
    Halfway between two lines means halfway in potential too, since the field is uniform.
  3. (c) $W_{\text{field}} = -\Delta U = -q\Delta V = -(-1.6 \times 10^{-19})(-60) = -9.6 \times 10^{-18}$ J.
    Why?
    The electron moves to lower potential, which raises its potential energy, so the field does negative work on it.
  4. (d) No. Only the starting and ending potentials matter. The sideways (up-down) part of the motion is along equipotentials and costs nothing.

Answer: (a) 400 V/m to the right. (b) $-60$ V. (c) $-9.6 \times 10^{-18}$ J, which is $-60$ eV. (d) No, the electric force is conservative.

Stuck? Get a hint
  1. E = ΔV / spacing.
  2. Read V at A and at B from the lines on each side.
  3. $W_{field}$ = −qΔV, with q = −e for the electron.
?Wait, how do I get work from a potential difference?
The work done by the field is $W = -\Delta U = -q\Delta V$. The work you do moving the charge slowly is $+q\Delta V$. Always put in the sign of q.
Check yourself
A charge is moved along an equipotential surface from one point to another. How much work does the electric field do?
  1. AIt depends on the path.
  2. BqEd, where d is the distance moved
  3. CZero
  4. DqV, where V is the potential of the surface
Show the answer

C. Along an equipotential, ΔV = 0, so W = −qΔV = 0. The last choice confuses the value of V with a change in V.

Check yourself
On an equipotential map drawn with equal steps in V, where is the field strongest?
  1. AWhere the lines are farthest apart
  2. BWhere the lines are closest together
  3. COn the line with the largest V
  4. DWhere V = 0
Show the answer

B. $E \approx \Delta V/\Delta s$: the same ΔV over a shorter distance means a stronger field. The value of V doesn't set the strength; its rate of change does.

Exam tip from Mr. T

When you draw field lines on an equipotential map, make them cross every line at 90° and point toward lower V. Graders check both the right angles and the direction.

  • Equipotentials: surfaces of constant V. No work moving along one.
  • Field lines are perpendicular to equipotentials and point toward lower V.
  • Closely spaced equipotentials mean a strong field: $E \approx \Delta V/\Delta s$.
  • Point charge: concentric spheres. Uniform field: evenly spaced parallel planes.