AP Physics C: E&M · Unit 12 lecture · Part 6 of 10 · 10 min

12.3 Fields of current-carrying wires and the Biot-Savart lawBuilding a field piece by piece

Mr. Thompkins
So far the magnetic field was handed to us. Now we flip it around: given a current, what field does it make? The answer is a law that looks like Coulomb's law with a twist, and with calculus it handles any shape of wire.

The Biot-Savart law gives the field made by a small piece of current. A piece of wire of length $d\vec\ell$ (pointing along the current I) makes, at a point a distance r away, $d\vec B = \frac{\mu_0}{4\pi}\frac{I\,d\vec\ell \times \hat r}{r^2}$. Here $\hat r$ is the unit vector from the piece to the point, and $\mu_0 = 4\pi \times 10^{-7}$ T·m/A is the permeability of free space. The size is $dB = \frac{\mu_0}{4\pi}\frac{I\,d\ell\sin\theta}{r^2}$, where θ is the angle between $d\vec\ell$ and $\hat r$.

?Wait, how did we build fields from pieces in Unit 8?
For a continuous charge, you chopped it into pieces dq, wrote the field of each piece with Coulomb's law, $dE = k\frac{dq}{r^2}$, used symmetry to cancel components, and integrated what was left. Biot-Savart works the same way, with $I\,d\vec\ell$ playing the role of dq and a cross product setting the direction.
?Wait, what is μ₀?
The permeability of free space, $\mu_0 = 4\pi \times 10^{-7}$ T·m/A. It sets the strength of magnetic effects the way $\varepsilon_0$ (or $k = \frac{1}{4\pi\varepsilon_0}$) sets the strength of electric ones. It's on the AP equation sheet. Handy shortcut: $\frac{\mu_0}{4\pi} = 10^{-7}$ and $\frac{\mu_0}{2\pi} = 2 \times 10^{-7}$ in SI units.

Two features to notice right away. First, it's an inverse square, like Coulomb. Second, the cross product means the field points around the current, not away from it. And a piece of wire pointing straight at the point (θ = 0) contributes nothing. For a long straight wire the result is $B = \frac{\mu_0 I}{2\pi r}$, with field lines that are circles around the wire. Right-hand grip rule: thumb along the current, fingers curl along $\vec B$.

$\vec B$rcurrent out of the page$B = \frac{\mu_0 I}{2\pi r}$
A long wire with current out of the page. The field circles it counterclockwise and weakens as 1/r.
Derive the long-wire field
Use the Biot-Savart law to derive the field a distance d from an infinitely long straight wire carrying current I.
I$d\vec\ell$Pd$\vec r$yθ×$d\vec B$ into page
A piece dℓ of the wire, the vector r to P, and the angle θ between them. Every piece makes a field into the page at P.
  1. Put the wire along the y-axis and P on the x-axis at distance d. A piece dy at height y is $r = \sqrt{y^2 + d^2}$ from P, and $\sin\theta = \frac{d}{r}$.
    Why?
    θ is the angle between $d\vec\ell$ (along the wire) and $\vec r$ (from the piece to P). Drawing the triangle is part of the work.
  2. Direction: every piece gives $d\vec\ell \times \hat r$ pointing the same way (into the page in the figure), so the sizes simply add. No components cancel.
    Why?
    Say this out loud on the FRQ. It's the symmetry argument that justifies adding magnitudes.
  3. $B = \frac{\mu_0 I}{4\pi}\int_{-\infty}^{\infty}\frac{d\,dy}{(y^2 + d^2)^{3/2}}$.
  4. The integral is $\left[\frac{y}{d^2\sqrt{y^2 + d^2}}\right]_{-\infty}^{\infty} = \frac{1}{d^2} - \left(-\frac{1}{d^2}\right) = \frac{2}{d^2}$.
    Why?
    You can do it with $y = d\tan\phi$, or look it up. On the exam an integral like this is often given to you.
  5. So $B = \frac{\mu_0 I}{4\pi}\cdot d\cdot\frac{2}{d^2} = \frac{\mu_0 I}{2\pi d}$.

Answer: $B = \frac{\mu_0 I}{2\pi d}$, circling the wire. For 12 A at 3.0 cm, that's $\frac{(4\pi \times 10^{-7})(12)}{2\pi(0.030)} = 8.0 \times 10^{-5}$ T.

Stuck? Get a hint
  1. Write r and sin θ in terms of y and d.
  2. All the dB point the same way, so add sizes: B = ∫ dB.
  3. The integral of d/(y² + d²)^(3/2) from −∞ to ∞ is 2/d.

Loops and arcs

At the center of a circular arc of radius R, every piece is the same distance R away and perpendicular to $\hat r$ (θ = 90°). So every piece gives the same $dB = \frac{\mu_0 I\,d\ell}{4\pi R^2}$, all pointing the same way, perpendicular to the plane of the arc. Adding them is just multiplying by the arc length $R\varphi$: $B = \frac{\mu_0 I\varphi}{4\pi R}$. A full loop (φ = 2π) gives $B = \frac{\mu_0 I}{2R}$, and N tightly wound turns give N times that.

An arc with radial leads
A wire carrying 12 A comes in along a straight line aimed at point P, goes a quarter of the way around a circle of radius 5.0 cm centered on P, and leaves along another straight line aimed away from P, as shown. Find the field at P.
IPRradial leads pointat P: no fieldarc: clockwise$\vec B$ at P into page
A quarter-circle arc of radius R centered on P, with straight leads that point along radii.
  1. The straight leads point along lines through P, so for every piece of them $d\vec\ell$ is parallel to $\hat r$ and $d\vec\ell \times \hat r = 0$. They contribute nothing.
    Why?
    Graders look for this sentence. Without it, they can't tell whether you forgot the leads or knew they vanish.
  2. The arc is a quarter circle, $\varphi = \frac{\pi}{2}$: $B = \frac{\mu_0 I\varphi}{4\pi R} = \frac{\mu_0 I}{8R}$.
  3. $B = \frac{(4\pi \times 10^{-7})(12)}{8(0.050)} = 3.8 \times 10^{-5}$ T.
  4. Direction: the current goes clockwise around P. Curl your right fingers clockwise and your thumb points into the page.

Answer: $3.8 \times 10^{-5}$ T, into the page. Only the arc contributes.

Stuck? Get a hint
  1. Which pieces of wire point straight at P (or straight away from it)?
  2. A quarter circle is φ = π/2.
  3. B = μ₀Iφ/(4πR) = μ₀I/(8R) for a quarter circle.

Off the center, on the axis of a loop a distance z away, the sideways parts of $d\vec B$ cancel in pairs around the loop and the parts along the axis add: $B = \frac{\mu_0 IR^2}{2(R^2 + z^2)^{3/2}}$. Far away it falls as $1/z^3$, the signature of a dipole.

00.511.522.5300.20.40.60.811.2z / R (distance along the axis)$B / B_{center}$35% at z = R$\frac{\mu_0 I}{2R}$ at the center
The field on the axis of a loop, as a fraction of its value at the center. It is down to 35% at z = R.
Pause and think
A point lies on the line of a long straight wire, beyond its end. What field does the wire make there?
I thought about it. Show me
Zero. Every piece of the wire points straight at that point, so θ = 0 for all of them and $d\vec\ell \times \hat r = 0$.
Check yourself
A flat coil of 20 tight turns, radius 4.0 cm, carries 5.0 A. What is the field at its center?
  1. A$1.6 \times 10^{-3}$ T
  2. B$7.9 \times 10^{-5}$ T
  3. C$5.0 \times 10^{-4}$ T
  4. D$2.5 \times 10^{-5}$ T
Show the answer

A. One turn: $\frac{\mu_0 I}{2R} = \frac{(4\pi \times 10^{-7})(5.0)}{0.080} = 7.85 \times 10^{-5}$ T. Twenty turns: $1.6 \times 10^{-3}$ T. Choice B forgets the 20 turns. Choice C is the long-wire formula $\frac{\mu_0 NI}{2\pi R}$ by mistake.

  • Biot-Savart: $d\vec B = \frac{\mu_0}{4\pi}\frac{I\,d\vec\ell \times \hat r}{r^2}$. Pieces aimed at the point give zero.
  • Long straight wire: $B = \frac{\mu_0 I}{2\pi r}$, circling (right-hand grip).
  • Arc of angle φ at its center: $\frac{\mu_0 I\varphi}{4\pi R}$. Full loop: $\frac{\mu_0 I}{2R}$; N turns: ×N.
  • Before integrating, say which pieces contribute nothing and which components cancel.