AP Physics C: E&M · Unit 10 lecture · Part 6 of 10 · 10 min

10.3 Capacitors: spherical and cylindricalCapacitors that aren't flat

Mr. Thompkins
Here's the good news: every capacitor derivation follows the same three steps you just used. Find E between the conductors with Gauss's law. Integrate to get ΔV. Divide Q by ΔV. Let's run it on two more shapes.

Cylindrical (coaxial) capacitor

A coaxial cable is an inner wire of radius a inside a thin outer cylinder of radius b, length L. Put $+Q$ on the inner conductor and $-Q$ on the outer.

+inner radius a: +Qouter radius b: −QGaussian cylinder, radius r$E = \frac{Q}{2\pi\varepsilon_0 L r}$outside b: E = 0
A coaxial capacitor in cross section. A Gaussian cylinder of radius r between the conductors encloses only the inner charge.
  1. Gauss (cylinder of radius r, $a < r < b$): $E(2\pi rL) = \frac{Q}{\varepsilon_0}$, so $E = \frac{Q}{2\pi\varepsilon_0Lr}$.
  2. Potential difference: $\Delta V = \int_a^b\frac{Q}{2\pi\varepsilon_0Lr}dr = \frac{Q}{2\pi\varepsilon_0L}\ln\frac{b}{a}$.
  3. Capacitance: $C = \frac{2\pi\varepsilon_0L}{\ln(b/a)}$.
?Wait, why do I drop the minus sign in $\Delta V = -\int\vec E\cdot d\vec r$ here?
For capacitance we want the size of the potential difference, $V_{inner} - V_{outer}$. Going from b in to a is against the field, so V rises; integrating E from a to b gives that positive difference directly. Keep track of which conductor is higher (the positive one) and use magnitudes.
Coaxial cable
A coaxial cable has an inner conductor of radius 0.50 mm and an outer conductor of radius 2.0 mm, with air between. Find its capacitance per meter of length.
  1. $\frac{C}{L} = \frac{2\pi\varepsilon_0}{\ln(b/a)} = \frac{2\pi(8.85 \times 10^{-12})}{\ln 4}$.
    Why?
    Only the ratio b/a matters, so the units of the radii cancel.
  2. $= \frac{5.56 \times 10^{-11}}{1.386} = 4.0 \times 10^{-11}$ F/m.

Answer: About 40 pF per meter.

Stuck? Get a hint
  1. Use C = 2πε₀L / ln(b/a).
  2. b/a = 2.0/0.50 = 4.
  3. ln 4 ≈ 1.39.

Spherical capacitor

Two concentric spherical shells, radii $a < b$, with $+Q$ on the inner and $-Q$ on the outer. Between them, $E = \frac{kQ}{r^2}$. Then $\Delta V = \int_a^b\frac{kQ}{r^2}dr = kQ\left(\frac{1}{a} - \frac{1}{b}\right) = \frac{kQ(b - a)}{ab}$, so

$$C = \frac{ab}{k(b - a)} = \frac{4\pi\varepsilon_0ab}{b - a}$$

?Wait, what's $\int dr/r^2$ again?
$\int_a^b\frac{dr}{r^2} = \frac{1}{a} - \frac{1}{b}$. Same integral as the rod in Unit 8.
Pause and think
Check two limits of the spherical result. (1) Let b go to infinity. (2) Let the gap $b - a = d$ be tiny compared with a.
I thought about it. Show me
(1) $C \to 4\pi\varepsilon_0a$: an isolated sphere, with the "other plate" at infinity. (2) $ab \approx a^2$, so $C \approx \frac{4\pi\varepsilon_0a^2}{d} = \frac{\varepsilon_0A}{d}$ with $A = 4\pi a^2$: the parallel-plate formula. A thin gap looks flat up close.
Spherical capacitor
Concentric metal shells have radii 0.10 m and 0.12 m. (a) Find the capacitance. (b) Compare with the isolated inner sphere alone.
  1. (a) $C = \frac{4\pi\varepsilon_0ab}{b - a} = \frac{4\pi(8.85 \times 10^{-12})(0.10)(0.12)}{0.020} = 6.7 \times 10^{-11}$ F $= 67$ pF.
  2. (b) Isolated sphere: $C = 4\pi\varepsilon_0(0.10) = 1.1 \times 10^{-11}$ F $= 11$ pF.
    Why?
    Bringing the opposite charge close lowers ΔV for the same Q, which raises C.

Answer: (a) 67 pF. (b) 11 pF, about six times smaller.

CapacitorCapacitanceDepends on
Parallel plates$\kappa\varepsilon_0 A/d$Area, gap, material
Spherical (radii a < b)$4\pi\varepsilon_0 ab/(b-a)$Both radii
Cylindrical (radii a < b, length L)$2\pi\varepsilon_0 L/\ln(b/a)$Length, ratio of radii
Isolated sphere, radius R$4\pi\varepsilon_0 R$Radius (other plate at infinity)
The four capacitances to know. In every one, C has the form ε₀ times a length.
Check yourself
For a coaxial capacitor, which change doubles the capacitance?
  1. ADoubling both radii
  2. BDoubling the length
  3. CDoubling the outer radius only
  4. DDoubling the charge
Show the answer

B. $C = 2\pi\varepsilon_0L/\ln(b/a)$ is proportional to L. Doubling both radii keeps $b/a$ the same, so C doesn't change; doubling b alone changes the log, not by a factor of 2.

Exam tip from Mr. T

"Derive the capacitance" is a classic Mathematical Routines question. Write the three steps with labels: "Gauss's law gives E = ...", "ΔV = ∫E dr = ...", "C = Q/ΔV = ...". Q must cancel in your final answer; if it doesn't, something is wrong.

  • Recipe: Gauss for E between conductors, $\Delta V = \int E\,dr$, $C = Q/\Delta V$.
  • Cylindrical: $C = 2\pi\varepsilon_0L/\ln(b/a)$. Spherical: $C = 4\pi\varepsilon_0ab/(b - a)$.
  • Isolated sphere: $4\pi\varepsilon_0R$. Thin gaps reduce to $\varepsilon_0A/d$.