AP Physics C: E&M · Unit 10 lecture · Part 8 of 10 · 7 min

10.3 Capacitors: a first look at combinations (Unit 11)Capacitors in series and in parallel

Mr. Thompkins
In circuits (Unit 11) capacitors rarely work alone. Here's a quick first look at the two ways to combine them, built from what you already know: charge conservation and potential.

In parallel, both capacitors connect across the same two points, so they have the same ΔV. Their charges add: $Q = C_1\Delta V + C_2\Delta V$, so the equivalent capacitance is $C_p = C_1 + C_2$. It's like one capacitor with more plate area.

In series, they're in a single line. Charge pushed onto the first plate induces equal and opposite charge on each plate down the line, so each capacitor holds the same Q. Their voltages add: $\Delta V = Q/C_1 + Q/C_2$, so $\frac{1}{C_s} = \frac{1}{C_1} + \frac{1}{C_2}$. It's like one capacitor with a wider gap, so the result is smaller than either one.

?Wait, why do series capacitors carry the same charge?
The plates between two series capacitors (and the wire joining them) form an isolated conductor that started neutral. If one end of it gets $-Q$, the other end must get $+Q$. Charge conservation forces the same Q on every capacitor in the chain.
3.0 μF6.0 μFseries: one pathsame Q on eachV shared: 8 V + 4 V$C_s = 2.0\ \mu$F3.0 μF6.0 μFparallel: same V (12 V)Q: 36 μC + 72 μC$C_p = 9.0\ \mu$Feach pair connected to 12 V
A 3.0 μF and a 6.0 μF capacitor in series (left) and in parallel (right), each pair connected to 12 V.
Series and parallel
A 3.0 μF and a 6.0 μF capacitor are connected to a 12 V battery, (a) in series and (b) in parallel. Find the equivalent capacitance, the charge on each and the voltage across each.
  1. (a) Series: $\frac{1}{C_s} = \frac{1}{3.0} + \frac{1}{6.0} = \frac{1}{2.0}$, so $C_s = 2.0\ \mu$F.
  2. $Q = C_s\Delta V = (2.0)(12) = 24\ \mu$C on each. Voltages: $24/3.0 = 8.0$ V and $24/6.0 = 4.0$ V, which add to 12 V.
    Why?
    In series, the smaller capacitor takes the larger share of the voltage.
  3. (b) Parallel: $C_p = 9.0\ \mu$F. Each has 12 V: $Q_3 = 36\ \mu$C, $Q_6 = 72\ \mu$C, total $108\ \mu$C $= (9.0)(12)$.

Answer: (a) 2.0 μF; 24 μC each; 8.0 V and 4.0 V. (b) 9.0 μF; 36 μC and 72 μC; 12 V each.

Stuck? Get a hint
  1. Series: same Q, add reciprocals of C.
  2. Parallel: same ΔV, add C directly.
  3. Check that the voltages (series) or the charges (parallel) add up.
Pause and think
Capacitors combine with the rules that resistors use the other way around. Why does it make sense that parallel capacitors add directly?
I thought about it. Show me
Putting capacitors in parallel is like putting their plates side by side: more total area, and $C \propto A$. Series is like stacking gaps end to end: more total gap, and $C \propto 1/d$.
?Wait, what's Q = CV again for each capacitor?
$Q = C\Delta V$ holds for each capacitor separately, using its own charge and its own voltage. Once you know the combination's Q or ΔV, use it one capacitor at a time.
Check yourself
Two identical capacitors C are connected in series. What is the equivalent capacitance?
  1. A2C
  2. BC
  3. CC/2
  4. DC/4
Show the answer

C. $1/C_s = 1/C + 1/C = 2/C$, so $C_s = C/2$. 2C is the parallel result.

  • Parallel: same ΔV, charges add, $C_p$ = C₁ + C₂.
  • Series: same Q, voltages add, $1/C_s = 1/C_1 + 1/C_2$. $C_s$ is smaller than either.
  • Full treatment in circuits comes in Unit 11.