AP Physics C: E&M · Unit 10 lecture · Part 1 of 10 · 9 min

10.1 Electrostatics with conductorsWhy the field inside metal is zero

By the end: Explain why conductors in equilibrium have zero interior field and a single potential, predict how charge spreads over and between conductors, derive capacitance for plate, spherical and cylindrical geometries, and find stored energy and the effect of a dielectric with the battery connected or disconnected.
Mr. Thompkins
Welcome to Unit 10. Here's a party trick physicists love: a person can sit inside a metal cage while lightning-sized sparks hit the outside, and feel nothing. Today you'll see exactly why, and it all comes from one sentence about metals.

A conductor has charges that are free to move: in a metal, some electrons wander through the whole material. Electrostatic equilibrium means those charges have stopped moving. Think about what that requires. If there were any field inside the metal, it would push the free electrons, and they would move. So in equilibrium:

$$\vec E = 0 \text{ everywhere inside the material of a conductor}$$

?Wait, what's the difference between a conductor and an insulator again?
From Unit 8: in a conductor, some electrons move freely through the material. In an insulator, electrons stay bound to their atoms and can only shift slightly (polarize). Charge you put on an insulator stays put; charge you put on a conductor moves until equilibrium.

How does the metal manage this when you put it in an outside field? The free electrons drift until the charge piled on the surface makes a field that exactly cancels the outside field everywhere inside. That takes about $10^{-16}$ s in a good metal, essentially instantly.

metalE = 0 insideexternal fieldsurface charges cancel the field inside
A metal block in an external field. Electrons drift to the left face, leaving the right face positive. Their field cancels the outside field inside the metal.

Four consequences follow, and each one is a likely exam question:

  1. Any excess charge sits on the surface. Draw a Gaussian surface just inside the metal: E = 0 on it, so the flux is zero, so the enclosed charge is zero.
  2. The whole conductor is one equipotential. $\Delta V = -\int\vec E\cdot d\vec r = 0$ between any two points in the metal, surface included.
  3. Just outside, the field is perpendicular to the surface. A parallel component would push charges along the surface, and they'd move.
  4. Just outside, $E = \sigma/\varepsilon_0$, where σ is the local surface charge density.
?Wait, why does zero field mean constant potential?
From Unit 9: $\Delta V = -\int\vec E\cdot d\vec r$. If E is zero along the whole path, the integral is zero, so V is the same at both ends. Constant V, not necessarily zero V.

Here's where the last rule comes from. Draw a tiny pillbox that pokes through the surface. Inside the metal, E = 0, so the inner cap has no flux. The sides are perpendicular to the surface, and the field just outside is perpendicular too, so the sides have no flux. Only the outer cap counts: $EA = \sigma A/\varepsilon_0$.

$E = \sigma/\varepsilon_0$perpendicularflux only throughthe outer capinside the metal: E = 0
A pillbox at a conductor's surface. Only the outer cap has flux, which gives E = σ/ε₀, twice the field of an insulating sheet with the same σ.
Pause and think
An insulating sheet with density σ makes $E = \sigma/(2\varepsilon_0)$. The surface of a conductor with the same σ makes $\sigma/\varepsilon_0$. Why the factor of 2?
I thought about it. Show me
The insulating sheet's field goes out both sides, so its flux leaves through two caps. At a conductor, the field inside is zero, so all the flux leaves through the one outer cap. Same charge, half the area for the flux, twice the field.
Field just outside a charged sphere
A metal sphere of radius 0.10 m carries 8.0 nC. (a) Find its surface charge density. (b) Find the field just outside the surface with $E = \sigma/\varepsilon_0$. (c) Check it against $kQ/R^2$.
  1. (a) The charge spreads evenly over the sphere (by symmetry): $\sigma = \frac{Q}{4\pi R^2} = \frac{8.0 \times 10^{-9}}{4\pi(0.10)^2} = 6.4 \times 10^{-8}\ \text{C/m}^2$.
  2. (b) $E = \frac{\sigma}{\varepsilon_0} = \frac{6.37 \times 10^{-8}}{8.85 \times 10^{-12}} = 7.2 \times 10^3$ N/C, pointing straight out.
  3. (c) $\frac{kQ}{R^2} = \frac{(9.0 \times 10^9)(8.0 \times 10^{-9})}{(0.10)^2} = 7200$ N/C. They agree.
    Why?
    They must: σ/ε₀ = Q/(4πR²ε₀) = kQ/R². Two roads, one answer.

Answer: (a) $6.4 \times 10^{-8}\ \text{C/m}^2$. (b) and (c) $7.2 \times 10^3$ N/C, outward.

Stuck? Get a hint
  1. σ = Q / (surface area) = Q / (4πR²).
  2. E = σ/ε₀ just outside a conductor.
  3. Since 1/ε₀ = 4πk, the two methods are the same algebra.
Check yourself
A solid copper block carries a net charge of +5 nC and sits in equilibrium. Where is the excess charge?
  1. ASpread evenly through the volume
  2. BConcentrated at the center
  3. COn the outer surface
  4. DHalf inside, half on the surface
Show the answer

C. A Gaussian surface just inside the metal has E = 0 on it, so it encloses zero net charge. The excess sits on the surface. Spreading it through the volume describes an insulator.

Check yourself
Which statement about a conductor in electrostatic equilibrium is correct?
  1. AV = 0 everywhere inside.
  2. BThe field just outside is parallel to the surface.
  3. CEvery point of the conductor is at the same potential.
  4. DThe field inside equals σ/ε₀.
Show the answer

C. Zero field inside means constant potential, so the conductor is an equipotential. Its value need not be zero. The field just outside is perpendicular, and σ/ε₀ is the field just outside, not inside.

  • In equilibrium: E = 0 inside the conductor's material.
  • Excess charge lives on the surface.
  • The conductor is an equipotential (constant V, not necessarily zero).
  • Just outside: E is perpendicular to the surface, with $E = \sigma/\varepsilon_0$.