8.3 Fluids and Newton's laws: floating and sinkingFloat, sink, or pop up
?Wait, what's Newton's second law in a form I can use?
A floating object is at rest at the surface, so it's in equilibrium: the buoyant force exactly balances its weight. It sinks just deep enough to displace its own weight of fluid. That gives you a beautiful result. With $F_b = mg$: $\rho_{fluid}V_{sub}g = \rho_{obj}V_{obj}g$, so $\frac{V_{sub}}{V_{obj}} = \frac{\rho_{obj}}{\rho_{fluid}}$. The fraction of a floating object that's under the surface equals its density divided by the fluid's.
That's also the proof of the floating rule from Section 1. If the object's density is less than the fluid's, the fraction is less than 1: it can find a waterline where the forces balance. If its density is greater, even fully submerged it can't displace enough fluid to hold itself up, so it sinks. Ice is 917 kg/m³, so in fresh water about 92% of an iceberg is under the surface, and in seawater about 89%.
?Wait, what makes an object speed up from rest?
Push a floating object all the way under and you're adding a third force. Now the displaced volume is the whole object, so the buoyant force is bigger than the weight, and you supply the difference: $F_{hand} = F_b - mg$. Let go, and the net upward force makes it accelerate up (until drag and the surface take over).
I thought about it. Show me
- Mass: $m = \rho V = (650)(2.0 \times 10^{-3}) = 1.30\ \text{kg}$. Weight: $(1.30)(9.8) = 12.7\ \text{N}$.
- (a) Floating: $F_b = mg$, so $V_{sub} = \frac{\rho_{obj}}{\rho_{fluid}}V = (0.65)(2.0 \times 10^{-3}) = 1.3 \times 10^{-3}\ \text{m}^3$: 65% of the block.
Why?
Start from the force balance in symbols; the density ratio drops right out of it. - (b) Fully under: $F_b = (1000)(2.0 \times 10^{-3})(9.8) = 19.6\ \text{N}$. Up equals down: $F_b = mg + F_{hand}$, so $F_{hand} = 19.6 - 12.7 = 6.9\ \text{N}$.
- (c) Without the hand: $F_{net} = 19.6 - 12.7 = 6.9\ \text{N}$ up, so $a = \frac{6.9}{1.30} = 5.3\ \text{m/s}^2$ up.
Why?
In symbols, $a = g\left(\frac{\rho_{fluid}}{\rho_{obj}} - 1\right)$: a check you can do in your head. Real water adds drag, so the real acceleration drops quickly.
Answer: (a) $1.3 \times 10^{-3}\ \text{m}^3$ (65%). (b) About 6.9 N. (c) About 5.3 m/s² upward at the instant of release.
Stuck? Get a hint
- Find the block's mass and weight from its density and volume.
- Floating: buoyant force = weight. Fully held under: buoyant force = weight + push.
- After release, the push is gone: $a = \frac{F_b - mg}{m}$.
- A$400\ \text{kg/m}^3$
- B$600\ \text{kg/m}^3$
- C$1400\ \text{kg/m}^3$
- D$1667\ \text{kg/m}^3$
Show the answer
B. 40% above means 60% below, and the fraction submerged equals $\frac{\rho_{obj}}{\rho_{water}}$, so $\rho = 0.60 \times 1000 = 600\ \text{kg/m}^3$. Choosing 400 uses the part above the water instead of the part below.
- Floating at rest: $F_b = mg$. Fraction submerged $= \frac{\rho_{obj}}{\rho_{fluid}}$.
- Held under: $F_b = mg + F_{hand}$. Released: $a = (F_b - mg)/m$.
- Denser fluid: a floating object rides higher, with the same buoyant force.
- Every buoyancy problem: free-body diagram first, then Newton's second law.