AP Physics C: Mechanics · Unit 3 lecture · Part 4 of 9 · 10 min

3.3 Potential energyStored energy and conservative forces

Mr. Thompkins
You carry a box up to a shelf twice: once up steep stairs, once up a long gentle ramp. Which trip has more work done by gravity on the box? Think about it, because the answer is the key to potential energy.
stairslong rampsame shelfh$W_{grav} = -mgh$ either way
Two paths to the same shelf. Gravity does the same work, −mgh, on both.

Gravity does the same work either way: $-mgh$. Only the vertical part of the motion matters, because gravity is vertical. A force like this, whose work depends only on the start and end points and not on the path, is called conservative. Gravity and ideal springs are conservative. An equivalent test: the work around any closed loop is zero, because you end where you started.

Friction is not conservative. Slide a box across the floor and back, and friction does negative work on both legs, so the round trip costs energy. The longer the path, the more work friction does.

For conservative forces, and only for them, we can define a potential energy $U$: energy stored in the configuration of a system. The definition is

$$\Delta U = -W_{cons} = -\int_{x_1}^{x_2} F\,dx$$

When gravity does positive work on a falling ball, the system's potential energy goes down by the same amount, and the kinetic energy goes up. Potential energy belongs to a system of interacting objects, ball and Earth, block and spring, never to one object alone.

?Wait, why is potential energy "of a system" and not of the object?
Because it comes from an interaction. The ball-Earth system stores gravitational energy because the two attract each other. If you choose the ball alone as your system, Earth is outside it, and gravity is an external force that does work on the ball. Either choice works, but you must not count gravity twice: either use $U_g$ or use the work done by gravity, never both.

Three potential energies to know

Spring: $F = -kx$, so $\Delta U = -\int_0^x(-kx)\,dx = \frac12 kx^2$, zero at the relaxed length. Gravity near the surface: $F = -mg$ (up positive), so $\Delta U = mg\Delta y$, and $U = mgy$ with any zero you like. Gravity at any distance: $F = -\frac{GMm}{r^2}$ (toward the center), so

$$\Delta U = -\int_{r_1}^{r_2}\left(-\frac{GMm}{r^2}\right)dr = -\frac{GMm}{r_2} + \frac{GMm}{r_1}, \qquad U_g = -\frac{GMm}{r}$$

?Wait, how do I integrate $\frac{1}{r^2}$?
Write it as $r^{-2}$ and use the power rule: $\int r^{-2}\,dr = \frac{r^{-1}}{-1} = -\frac1r$. So $\int_{r_1}^{r_2}\frac{dr}{r^2} = -\frac1{r_2} + \frac1{r_1}$. The minus signs are where most errors come from, so write every step.
0123456-1.2-1-0.8-0.6-0.4-0.200.2r / RU (units of GMm/R)$U = -\frac{GMm}{r}$surfaceR
U = −GMm/r: zero infinitely far away, negative everywhere else, rising toward zero as r grows. Near the surface the curve looks like a straight line, which is where mgy comes from.

Negative potential energy isn't a problem. Only changes in $U$ matter, and choosing zero at infinity just makes every closer position negative. Moving away from Earth, $U$ goes up (less negative), as it should when you lift something.

Build U from F
A conservative force acts on a particle along the x-axis: $F(x) = -8x + 2x^3$ (N, with $x$ in m). Taking $U(0) = 0$, derive $U(x)$, and check your answer.
  1. Start from the definition: $U(x) - U(0) = -\int_0^x F\,dx = -\int_0^x(-8x + 2x^3)\,dx$.
    Why?
    Write ΔU = −∫F dx first, with its minus sign. Dropping that sign flips every answer that follows.
  2. Integrate: $-\left[-4x^2 + \frac{x^4}{2}\right]_0^x = 4x^2 - \frac12 x^4$.
  3. So $U(x) = 4x^2 - \frac12 x^4$ joules.
  4. Check by differentiating: $-\frac{dU}{dx} = -(8x - 2x^3) = -8x + 2x^3$. That's $F$.
    Why?
    Going back to F is the fastest check there is. It is also the next section's main idea.

Answer: $U(x) = 4x^2 - \frac12 x^4$ (J), which gives back $F = -\frac{dU}{dx}$.

Stuck? Get a hint
  1. Write U(x) − U(0) = −∫F dx from 0 to x.
  2. Integrate term by term: −8x gives −4x², 2x³ gives x⁴/2.
  3. Then put the minus sign in front of everything.
Pause and think
Why can't you define a potential energy for kinetic friction?
I thought about it. Show me
Because its work depends on the path. A potential energy has one value at each position, so the work between two points would have to be the same for every path. Friction does more negative work on a longer path between the same two points, so no single $U(x)$ could describe it. Its energy goes into thermal energy instead.
Check yourself
A spring with $k = 200\ \text{N/m}$ is stretched from 0.10 m to 0.30 m beyond its relaxed length. By how much does its potential energy increase?
  1. A4.0 J
  2. B8.0 J
  3. C9.0 J
  4. D40 J
Show the answer

B. $\Delta U = \frac12(200)(0.30^2 - 0.10^2) = 100(0.08) = 8.0\ \text{J}$. Choice A is $\frac12 k(\Delta x)^2$ with $\Delta x = 0.20$, which wrongly measures from 0.10 m instead of from the relaxed length. Spring energy uses the stretch from equilibrium.

  • Conservative force: work depends only on the endpoints (gravity, springs). Friction is not conservative.
  • $\Delta U = -W_{cons} = -\int F\,dx$. Potential energy belongs to a system.
  • $U_s = \frac12 kx^2$, $U_g = mgy$ near the surface, $U_g = -\frac{GMm}{r}$ in general.
  • Only changes in U matter. Pick a zero and stick with it.