AP Physics C: Mechanics · Unit 2 lecture · Part 11 of 11 · 10 min
Unit 2 wrap-upPut it together
Mr. Thompkins
That was a big unit, and you made it. Let's tie it together. Every problem in it, whether it has friction, springs, drag or circles, runs the same play: system, free-body diagram, Newton's second law per axis, then solve.
Situation
Start from
Watch for
Anything with forces
FBD, then ΣF = ma per axis
Only real forces, each with an agent
Connected objects
System for a, one object for tension
Same a along the string
Friction
$f_s$ ≤ μs $F_N$, $f_k$ = μk $F_N$
$F_N$ is not always mg
Springs
F = −kΔx
Series vs parallel
Drag
m dv/dt = mg − bv
Separate variables; $v_T$ when a = 0
Circles
ΣF toward center = mv²/r
No separate centripetal arrow
Center of mass
$x_{cm}$ = ∫x dm / ∫dm
ΣF_ext = M $a_{cm}$
The Unit 2 toolkit: what to start from, and what to watch for.
?Wait, when do I treat things as one system and when do I split them?
Use the whole system when you want the shared acceleration: internal forces like string tension cancel, so the math is short. Split off a single object when you want an internal force, like the tension, because the only way to "see" a force in an equation is to choose a system it acts on from outside.
Three threads run through the whole unit. First, forces are interactions: every force has an agent, and every force has a third-law partner on the other object. Second, $\sum F = ma$ per axis, with the axes chosen along the acceleration. Third, when a force depends on time or speed, the second law becomes calculus: integrate $a(t)$, or separate variables when $a$ depends on $v$.
?Wait, how do I check whether my derived expression makes sense?
Three quick tests. Units: both sides must match (m/s², N, m/s). Limits: set a variable to zero or make it huge and see if the result matches what you know, like $\mu_k = 0$ giving the frictionless answer. Direction: more of something that should help must make the answer bigger. Graders often ask for exactly this kind of reasoning.
Pause and think
Connect two topics: why does a skydiver reach a terminal speed, but a ball on a string in a horizontal circle can keep a constant speed with a nonzero net force?
I thought about it. Show me
For the skydiver, the net force is along the velocity, so it changes the speed until drag cancels gravity and the net force is zero. For the ball on the string, the net force is perpendicular to the velocity, toward the center, so it changes only the direction, never the speed. A nonzero net force always means acceleration, but which part of the velocity changes depends on the direction of the force.
Traps that cost points
✕ Drawing a "centripetal force" arrow, or a "force of motion".
✓ Only real forces with agents. The centripetal force is the net of the real ones.
✕ Writing $F_N$ = mg every time.
✓ Find $F_N$ from the perpendicular direction: mg cos θ on a slope, more with a push down, less with a pull up.
✕ Using μs $F_N$ for static friction when nothing is about to slip.
✓ Static friction is whatever keeps it at rest. μs $F_N$ is only the maximum.
✕ Cancelling a third-law pair on one FBD.
✓ Third-law partners act on different objects.
✕ Using the total mass to find a tension.
✓ Isolate one object so the tension is an external force on it.
✕ Pointing drag up for a rising object.
✓ Drag opposes velocity: rising, it points down with gravity.
✕ Writing $v_T = \sqrt{mg/b}$ for linear drag.
✓ Linear: $v_T = \frac{mg}{b}$. The square root is for quadratic drag.
✕ Putting the center of mass in the middle of a nonuniform rod.
✓ Integrate x dm over dm. It shifts toward the denser end.
Draw the FBD first, even when the question doesn't ask for one. Label every force with a standard symbol, and make the arrow lengths sensible.
Write ΣF = ma in symbols for each axis before substituting anything. "Derive" parts are graded on that line.
For connected objects, say which system you used for each equation.
For drag, follow the five steps: law with signs, separate, integrate with limits, solve, check t = 0 and t → ∞.
For "what happens if" parts, use your symbolic answer: say how a, T or $v_T$ changes and point to the variable that causes it.
For experiments (springs, friction, drag), name the quantities you would graph so the slope gives what you want, and use a best-fit line.
Mixed FRQ practice
A 4.0 kg block on a horizontal table is tied by a light string over a light, frictionless pulley to a hanging 2.0 kg block. The coefficient of kinetic friction between the table and the 4.0 kg block is 0.25, and the system is moving. (a) Derive an expression for the acceleration in terms of $m_1$ (table block), $m_2$ (hanging block), $\mu_k$ and $g$. (b) Calculate the acceleration and the tension. (c) If the table were rougher, would the tension increase, decrease or stay the same? Justify.
(a) Table block, along the string: $T - \mu_km_1g = m_1a$. Hanging block, down positive: $m_2g - T = m_2a$.
Why?
One FBD and one equation per object. For the table block, $F_N$ = m₁g from its vertical balance, so friction is μk m₁ g.
Add the two equations to eliminate $T$: $m_2g - \mu_km_1g = (m_1 + m_2)a$, so $a = \frac{(m_2 - \mu_km_1)g}{m_1 + m_2}$.
Why?
Adding the equations is the same as treating both blocks as one system: the tension is internal and drops out.
$T = m_2(g - a) = (2.0)(9.8 - 1.63) = 16.3\ \text{N}$. Check with the table block: $(4.0)(1.63) + (0.25)(4.0)(9.8) = 6.5 + 9.8 = 16.3\ \text{N}$.
Why?
Checking with the other equation catches arithmetic slips and costs ten seconds.
(c) Increase. A bigger $\mu_k$ makes $a$ smaller (the numerator shrinks), and $T = m_2(g - a)$ grows as $a$ shrinks.
Why?
Point to the equation. The justification is that T depends on a, and a depends on μk, in that direction.
Answer: (a) $a = \frac{(m_2 - \mu_km_1)g}{m_1 + m_2}$ (b) 1.63 m/s² and 16.3 N (c) Increases: more friction means less acceleration, and $T = m_2(g - a)$.
Stuck? Get a hint
Write ΣF = ma for each block separately, along the direction of the string.
Add the two equations: T cancels.
For (c), look at how a depends on μk, then how T depends on a.
Check yourself
A box is pulled across a rough floor by a rope angled 30° above the horizontal. If the rope angle is increased to 40° with the same tension, what happens to the kinetic friction force?
AIt increases
BIt decreases
CIt stays the same
DIt becomes zero
Show the answer
B. A steeper rope pulls up harder, $T\sin\theta$ grows, so $F_N = mg - T\sin\theta$ shrinks, and $f_k = \mu_kF_N$ shrinks with it. Choice C assumes friction depends only on the surfaces, forgetting that it's proportional to the normal force.
Check yourself
A small sphere falls through oil and reaches terminal speed. If the oil is replaced by one with twice the drag coefficient b, what happens to the terminal speed and the time constant?
ABoth double
BBoth halve
CTerminal speed halves, time constant doubles
DTerminal speed doubles, time constant halves
Show the answer
B. $v_T = \frac{mg}{b}$ and $\tau = \frac mb$, so doubling $b$ halves both. The sphere reaches a lower speed sooner. Choice C gets the terminal speed right but inverts the time constant.
Mr. Thompkins
That's Unit 2. Take the Unit 2 quiz now, and redo any walk you missed with the hints closed. Next, Unit 3: energy. You'll see that many of these force problems get much shorter when you track energy instead. See you there.