AP Physics C: Mechanics · Unit 2 lecture · Part 10 of 11 · 11 min

2.10 Circular motionTurning takes a net force

Mr. Thompkins
Swing a bucket of water over your head fast enough and the water stays in, even upside down. Turn a car too fast on an icy curve and it slides straight off. Both come from one fact: moving in a circle takes a net force pointing toward the center.

An object moving in a circle at constant speed is accelerating, because the direction of its velocity keeps changing. That acceleration points toward the center of the circle, so it's called centripetal ("center seeking"), and its size is

$$a_c = \frac{v^2}{r} = \omega^2r$$

v$a_c$v$a_c$v: tangent$a_c = \frac{v^2}{r}$toward center
At every point, velocity is tangent to the circle and the centripetal acceleration points straight at the center.
?Wait, what are period and angular speed?
The period $T$ is the time for one full trip around: $T = \frac{2\pi r}{v}$. The angular speed $\omega$ is the angle swept per second, in radians per second: $\omega = \frac{2\pi}{T} = \frac vr$. A wheel turning once every 0.50 s has $\omega = 4\pi \approx 12.6\ \text{rad/s}$.

Here's where $a_c$ comes from, with calculus. Uniform circular motion has position $\vec r = r\cos(\omega t)\,\hat i + r\sin(\omega t)\,\hat j$. Differentiate once: $\vec v = -r\omega\sin(\omega t)\,\hat i + r\omega\cos(\omega t)\,\hat j$, which has size $r\omega = v$. Differentiate again: $\vec a = -\omega^2\left[r\cos(\omega t)\,\hat i + r\sin(\omega t)\,\hat j\right] = -\omega^2\vec r$. The minus sign means it points opposite to $\vec r$, toward the center, and its size is $\omega^2r = \frac{v^2}{r}$.

Newton's second law then says the net force toward the center must be $\frac{mv^2}{r}$. That net force is not a new kind of force. It's provided by real forces you can name: tension in a string, gravity on a moon, friction on a car's tires, the normal force from a banked road. So write $\sum F_{toward\ center} = \frac{mv^2}{r}$, and fill in the left side from your FBD.

?Wait, isn't there an outward centrifugal force pushing me in a turning car?
Not in the ground frame, which is the frame the AP exam uses. Your body tends to keep moving in a straight line (first law), and the car turns underneath you, so the door pushes you inward. That inward push is the real force. The outward "push" you feel is just your inertia. Never draw a centrifugal force on an FBD.
Pause and think
A car drives over the top of a rounded hill at steady speed. Is the normal force from the road bigger than, equal to, or less than $mg$?
I thought about it. Show me
Less. At the top, the center of the circle is below the car, so the net force must point down: $mg - F_N = \frac{mv^2}{r}$, which gives $F_N = mg - \frac{mv^2}{r} < mg$. You feel lighter. Go fast enough and $F_N$ hits zero: the car leaves the road.
Flat curve, then a banked one
(a) A car rounds a flat curve of radius 50 m. The coefficient of static friction between tires and road is 0.80. What is the maximum speed? (b) A curve of radius 80 m is banked at 20°. At what speed can a car round it with no friction at all?
$mg$$F_N$
Banked curve, no friction: the vertical part of the normal force holds the car up, and the horizontal part points to the center.
  1. (a) Static friction is the only horizontal force, and it points toward the center: $f_s = \frac{mv^2}{r}$. Vertically, $F_N = mg$.
    Why?
    Static, because the tires are not sliding sideways on the road. Toward the center, because that is where the net force must point.
  2. At the maximum speed, friction is at its limit: $\mu_smg = \frac{mv^2}{r}$, so $v = \sqrt{\mu_sgr} = \sqrt{(0.80)(9.8)(50)} = 19.8\ \text{m/s}$.
    Why?
    Mass cancels, so a truck and a sports car on the same tires and road have the same limit.
  3. (b) Banked, no friction: the normal force tilts toward the center. Vertical: $F_N\cos\theta = mg$. Horizontal: $F_N\sin\theta = \frac{mv^2}{r}$.
    Why?
    Keep the axes horizontal and vertical here, not along the slope, because the acceleration is horizontal, toward the center of the circle.
  4. Divide: $\tan\theta = \frac{v^2}{rg}$, so $v = \sqrt{rg\tan\theta} = \sqrt{(80)(9.8)\tan 20°} = 16.9\ \text{m/s}$.

Answer: (a) about 19.8 m/s (b) about 16.9 m/s

Stuck? Get a hint
  1. On a flat curve, static friction provides the centripetal force: μs mg = mv²/r.
  2. On the banked curve, use horizontal and vertical axes, not axes along the road.
  3. Divide the two equations to cancel $F_N$: tan θ = v²/(rg).

Vertical circles

top: $T + mg = \frac{mv^2}{r}$both point to centerbottom: $T - mg = \frac{mv^2}{r}$T up, mg downmgTT
A ball on a string in a vertical circle. At the top, tension and gravity both point toward the center. At the bottom, tension points to the center and gravity points away.
A ball on a string
A 0.50 kg ball whirls in a vertical circle on a string 0.80 m long. (a) At the bottom it moves at 5.0 m/s. Find the tension. (b) At the top it moves at 3.0 m/s. Find the tension. (c) What is the slowest it can go at the top with the string still taut?
  1. (a) Bottom, toward the center (up) positive: $T - mg = \frac{mv^2}{r}$, so $T = (0.50)(9.8) + \frac{(0.50)(5.0)^2}{0.80} = 4.9 + 15.6 = 20.5\ \text{N}$.
    Why?
    Tension must hold up the weight and also supply the centripetal force, so it is biggest at the bottom.
  2. (b) Top, toward the center (down) positive: $T + mg = \frac{mv^2}{r}$, so $T = \frac{(0.50)(3.0)^2}{0.80} - 4.9 = 5.6 - 4.9 = 0.73\ \text{N}$.
    Why?
    At the top, gravity helps. Tension only has to make up the difference.
  3. (c) The slowest speed makes $T = 0$: $mg = \frac{mv^2}{r}$, so $v = \sqrt{gr} = \sqrt{(9.8)(0.80)} = 2.8\ \text{m/s}$.
    Why?
    Any slower and gravity alone is more than the centripetal force needed, so the ball falls inside the circle and the string goes slack.

Answer: (a) 20.5 N (b) 0.73 N (c) 2.8 m/s

Stuck? Get a hint
  1. Pick "toward the center" as positive at each point.
  2. At the bottom T points to the center and mg points away. At the top both point to the center.
  3. The minimum speed at the top is where T = 0.

One more piece. If the speed is changing as the object goes around, there's also a tangential acceleration $a_t = \frac{dv}{dt}$ along the velocity, and the total acceleration is $a = \sqrt{a_c^2 + a_t^2}$. The centripetal part changes the direction, and the tangential part changes the speed.

Check yourself
A car moves around a circular track of radius 25 m. At one instant its speed is 10 m/s and it's speeding up at 3.0 m/s². What is the size of its total acceleration?
  1. A3.0 m/s²
  2. B4.0 m/s²
  3. C5.0 m/s²
  4. D7.0 m/s²
Show the answer

C. $a_c = \frac{10^2}{25} = 4.0\ \text{m/s}^2$ toward the center and $a_t = 3.0\ \text{m/s}^2$ along the track. They're perpendicular: $\sqrt{4.0^2 + 3.0^2} = 5.0\ \text{m/s}^2$. Choice D adds them as if they pointed the same way.

Check yourself
A roller coaster car goes through the top of a vertical loop faster than the minimum speed. Which way does the track push on the car there?
  1. AUp, away from the center
  2. BDown, toward the center
  3. CThere is no normal force at the top
  4. DSideways, along the velocity
Show the answer

B. The car is upside down on the inside of the loop, so the track pushes it toward the center, which is down. Gravity plus that normal force supply $\frac{mv^2}{r}$. Choice C is true only at exactly the minimum speed, $\sqrt{gr}$.

  • $a_c = \frac{v^2}{r} = \omega^2r$, toward the center. $T = \frac{2\pi r}{v}$.
  • $\sum F_{toward\ center} = \frac{mv^2}{r}$, with real forces (tension, friction, normal, gravity) on the left.
  • Flat curve: $v_{max} = \sqrt{\mu_sgr}$. Banked, no friction: $\tan\theta = \frac{v^2}{rg}$. Top of a vertical circle: $v_{min} = \sqrt{gr}$.
  • Changing speed adds $a_t = \frac{dv}{dt}$, perpendicular to $a_c$.