11.7 Kirchhoff's junction ruleJunctions and multi-loop circuits

Kirchhoff's junction rule: the total current flowing into a junction equals the total current flowing out, $\sum I_{in} = \sum I_{out}$. It's conservation of charge. In steady state charge can't pile up at a point in a wire, so whatever arrives each second must leave each second.
?Wait, what does "conservation of charge" mean exactly?
The Kirchhoff method
- Label a current in every branch, with a guessed direction. Each branch has one current.
- Write the junction rule at every junction but one. With j junctions, j − 1 equations are independent.
- Write the loop rule for enough loops to have as many equations as unknown currents. Use the sign rules from 11.6.
- Solve the system. A negative answer means the current flows opposite your guess.
- Check: the potential difference between two junctions must come out the same along every branch.
?Wait, what were the loop-rule signs again?
I thought about it. Show me
- Junction P: in come $I_1$ and $I_3$, out goes $I_2$: $I_1 + I_3 = I_2$.
- Left loop, clockwise (up the left branch, down the middle): up through the 10 V battery (− to +): $+10$. Through the 2.0 Ω with $I_1$: $-2.0I_1$. Down the middle with $I_2$: $-4.0I_2$. So $10 - 2.0I_1 - 4.0I_2 = 0$.
Why?
Walking up the left branch you meet the battery's short plate (−) first, then the long plate (+), so it's a gain. - Right loop, counterclockwise (up the right branch, down the middle): $5.0 - 2.0I_3 - 4.0I_2 = 0$.
- Substitute $I_2 = I_1 + I_3$: $10 = 6.0I_1 + 4.0I_3$ and $5.0 = 4.0I_1 + 6.0I_3$. Multiply the first by 3 and the second by 2 and subtract: $30 - 10 = (18 - 8.0)I_1$, so $I_1 = 2.0$ A. Then $4.0I_3 = 10 - 12 = -2.0$, so $I_3 = -0.50$ A, and $I_2 = 2.0 - 0.50 = 1.5$ A.
Why?
Elimination is fine, and so is a calculator's matrix solver. Show the equations you solved either way. - (b) Middle branch: $V_P - V_Q = (1.5)(4.0) = 6.0$ V. Left branch, from Q up to P: $+10 - (2.0)(2.0) = 6.0$ V. Right branch: $+5.0 - (2.0)(-0.50) = 6.0$ V. All three agree.
Why?
This is the check that catches sign errors. If one branch disagrees, recheck that branch's loop equation. - (c) The 10 V battery delivers $(10)(2.0) = 20$ W. In the right branch 0.50 A actually flows down, into the 5.0 V battery's + terminal, so that battery absorbs $(5.0)(0.50) = 2.5$ W. Resistors: $8.0 + 9.0 + 0.50 = 17.5$ W. And $20 = 2.5 + 17.5$.
Answer: (a) $I_1 = 2.0$ A up the left, $I_2 = 1.5$ A down the middle, $I_3 = -0.50$ A, so 0.50 A flows down the right branch. (b) $V_P - V_Q = 6.0$ V on all three branches. (c) 20 W delivered; 2.5 W absorbed by the 5.0 V battery.
Stuck? Get a hint
- One junction equation: what flows into P equals what flows out.
- Two loop equations: the left window and the right window, each through the middle 4.0 Ω.
- Replace I₂ with I₁ + I₃ in both loop equations, then solve two equations in two unknowns.
A handy result from the junction rule: when a current I splits between two parallel resistors, the voltages match, $I_1R_1 = I_2R_2$, so $I_1 = I\frac{R_2}{R_1 + R_2}$. The smaller resistor takes the bigger share, which surprises people the first time.
- A3.0 A
- B6.0 A
- C4.5 A
- D1.5 A
Show the answer
A. Same voltage: $6.0I_6 = 3.0I_3$, so the 3.0 Ω takes twice as much. $I_6 = 9.0 \cdot \frac{3.0}{9.0} = 3.0$ A, and the 3.0 Ω takes 6.0 A. The trap is 6.0 A, which gives the bigger share to the bigger resistor.
- A3
- B4
- C6
- D2
Show the answer
A. One fewer than the number of junctions: 4 − 1 = 3. The last junction's equation can be built from the others. You'd then need 6 − 3 = 3 loop equations to solve for all 6 currents. The trap is 4, which counts a repeated equation.
- Junction rule: $\sum I_{in} = \sum I_{out}$. It's conservation of charge.
- One current per branch; j − 1 junction equations; enough loops for the rest.
- A negative current is the right size, flowing the other way.
- Check: the same $V_P - V_Q$ along every branch between the same two junctions.