8.4 Fluids and conservation laws: Bernoulli's equationFaster flow, lower pressure

?Wait, when is mechanical energy conserved?
Follow a small parcel of water through a pipe. It has kinetic energy because it's moving, and gravitational energy because of its height. And the water behind it pushes on it, doing work as it moves forward. That push comes from pressure. Bernoulli's equation is the work-energy bookkeeping for that parcel, written per unit volume so the mass disappears:
$P_1 + \rho gy_1 + \tfrac12\rho v_1^2 = P_2 + \rho gy_2 + \tfrac12\rho v_2^2$. Each term has units of pascals, which are also joules per cubic meter. $\tfrac12\rho v^2$ is kinetic energy per volume (compare $\tfrac12 mv^2$). $\rho gy$ is gravitational energy per volume (compare $mgy$). And $P$ is the work done by pressure per volume. In an ideal fluid nothing is lost to friction, so the total stays the same along the flow.
Now the strange result. In a horizontal pipe, $y_1 = y_2$, and the height terms cancel: $P + \tfrac12\rho v^2$ is constant. Where the pipe narrows, continuity makes the water faster, so the kinetic term grows, and the pressure term must shrink. Physically: to speed up, the parcel needs a net forward push, so the pressure behind it (in the wide part) must be higher than the pressure ahead of it (in the narrow part).
?Wait, what's ρgy without the fluid? Where have I seen it?
Bernoulli also contains Section 3 hiding inside it. If the fluid isn't moving, $v = 0$ everywhere, and the equation becomes $P_1 + \rho gy_1 = P_2 + \rho gy_2$: going down a distance $h$ raises the pressure by $\rho gh$. That's $P = P_0 + \rho gh$ again. And if water moves up a pipe of constant width at steady speed, continuity keeps the speed the same, so going up by $h$ lowers the pressure by $\rho gh$, just like still water.
I thought about it. Show me
- Write Bernoulli in full: $P_1 + \rho gy_1 + \tfrac12\rho v_1^2 = P_2 + \rho gy_2 + \tfrac12\rho v_2^2$.
Why?
Starting from the complete equation earns the starting point. Then simplify on purpose, saying why. - Set $y_1 = 0$ and $y_2 = 5.0\ \text{m}$, and solve for $P_2$: $P_2 = P_1 + \tfrac12\rho(v_1^2 - v_2^2) - \rho gy_2$.
- Kinetic part: $\tfrac12(1000)(2.0^2 - 4.0^2) = -6000\ \text{Pa}$. Height part: $(1000)(9.8)(5.0) = 49{,}000\ \text{Pa}$.
- $P_2 = 3.0 \times 10^5 - 6000 - 49{,}000 = 2.45 \times 10^5\ \text{Pa}$.
Why?
Both effects lower the pressure: speeding up costs 6 kPa and climbing 5 m costs 49 kPa. Height is the bigger cost here, which is why upper floors get weaker water pressure.
Answer: About $2.45 \times 10^5\ \text{Pa}$.
Stuck? Get a hint
- Write all six terms of Bernoulli's equation first.
- Put the ground at $y = 0$, so $\rho gy_1 = 0$.
- Solve for $P_2$: start from $P_1$, subtract the gain in kinetic energy per volume and the gain in height energy per volume.
- A$1.80 \times 10^5\ \text{Pa}$
- B$1.91 \times 10^5\ \text{Pa}$
- C$1.69 \times 10^5\ \text{Pa}$
- D$0.54 \times 10^5\ \text{Pa}$
Show the answer
C. Same height, so $P_2 = P_1 + \tfrac12\rho(v_1^2 - v_2^2) = 1.80 \times 10^5 + \tfrac12(1000)(2.25 - 25) = 1.80 \times 10^5 - 11{,}375 \approx 1.69 \times 10^5\ \text{Pa}$. The 1.91 choice adds the kinetic term instead of subtracting it, which is the "squeezing raises pressure" trap in numbers.

On Bernoulli FRQs, write all six terms, then cross out terms one at a time with a reason: "same height", "open to the atmosphere, so both pressures are $P_0$", "the tank is wide, so the surface speed is about zero". Each justified simplification shows the reasoning the rubric is looking for.
- Bernoulli: $P + \rho gy + \tfrac12\rho v^2$ is the same at every point along the flow of an ideal fluid. It is energy conservation per unit volume.
- Same height: faster flow means lower pressure.
- Still fluid ($v = 0$): Bernoulli becomes $P = P_0 + \rho gh$.
- Use continuity to get the speeds, then Bernoulli to get the pressures.