8.2 Pressure at depthDeeper means more pressure

Imagine a vertical column of water inside a lake: a tall box shape of cross-sectional area $A$, from the surface down to depth $h$. It isn't a real container, just a chunk of water we decide to study. The column is at rest, so the net force on it is zero.
?Wait, what does a free-body diagram need?
Three vertical forces act on the column. The air pushes down on its top with $P_0A$. Gravity pulls down with the column's weight: its mass is $\rho V = \rho Ah$, so its weight is $\rho Ahg$. And the water below pushes up on its bottom with $PA$, where $P$ is the pressure at depth $h$. (The water around the sides pushes inward horizontally, and those forces cancel.)
Balance them: $PA = P_0A + \rho Ahg$. Divide by $A$, and the area disappears: $P = P_0 + \rho gh$. The pressure at depth $h$ is the pressure at the surface plus the weight of fluid above each square meter. Deeper means more fluid on top of you, so more pressure, and the increase is a straight line: every meter of fresh water adds $\rho g(1\ \text{m}) = 9800\ \text{Pa}$, almost 10% of an atmosphere.
Absolute and gauge pressure
$P = P_0 + \rho gh$ is the absolute pressure: the total, including the atmosphere. Many gauges, like a tire gauge or a depth gauge, measure only how much above atmospheric the pressure is. That's the gauge pressure: $P_{gauge} = P - P_0 = \rho gh$. A flat tire reads zero on a tire gauge, but the air in it is still at atmospheric pressure.
?Wait, what does the slope of a graph mean?
Here's the surprising part. The formula has only $\rho$, $g$ and $h$ in it. Not the width of the container, not its shape, not how much water there is in total. At the same depth in the same fluid, the pressure is the same, whether you're in a narrow tube or a wide lake. It also means every point at the same level in a connected fluid at rest has the same pressure, which is how a U-tube compares fluids.
I thought about it. Show me
- (a) $P_{gauge} = \rho gh = (1025)(9.8)(15) = 1.51 \times 10^5\ \text{Pa}$.
- $P = P_0 + \rho gh = 1.01 \times 10^5 + 1.51 \times 10^5 = 2.52 \times 10^5\ \text{Pa}$, about 2.5 times atmospheric.
Why?
Read the question for "gauge" or "absolute". Giving the other one is the most common lost point in this topic. - (b) Pick the level of the oil-water boundary in the right arm. Draw a horizontal line through it to the left arm. Both points are in the same connected water at the same level, so the pressures there are equal.
Why?
This is the key move for every U-tube: same fluid, same level, same pressure. - Right point: $P_0 + \rho_{oil} g h_{oil}$. Left point: $P_0 + \rho_w g h_w$. Set them equal: $\rho_w h_w = \rho_{oil} h_{oil}$.
- $h_w = \frac{\rho_{oil}}{\rho_w}h_{oil} = \frac{850}{1000}(15.0\ \text{cm}) = 12.75\ \text{cm}$, about 12.8 cm.
Why?
The denser water needs a shorter column to make the same pressure. g and the atmosphere cancel.
Answer: (a) Gauge $1.51 \times 10^5$ Pa, absolute $2.52 \times 10^5$ Pa. (b) About 12.8 cm.
Stuck? Get a hint
- Gauge pressure is just $\rho gh$. Absolute adds $P_0$.
- In the U-tube, choose the level of the oil-water boundary and compare the two arms there.
- Both sides have $P_0$ on top, so it cancels: $\rho_w h_w = \rho_{oil}h_{oil}$.
- A$4.0 \times 10^5\ \text{Pa}$
- B$3.0 \times 10^5\ \text{Pa}$
- C$2.0 \times 10^5\ \text{Pa}$
- D$1.0 \times 10^5\ \text{Pa}$
Show the answer
B. Each 10 m of water adds about $\rho g(10) = 0.98 \times 10^5\ \text{Pa}$. From 10 m to 20 m that's one more step: about $3.0 \times 10^5$ Pa. Doubling to $4.0 \times 10^5$ is the trap: absolute pressure is not proportional to depth, because of the atmosphere at the start. Only gauge pressure doubles.
- $P = P_0 + \rho gh$, from balancing forces on a column of fluid. h is measured down from the surface.
- Gauge pressure: $\rho gh$. Absolute: add atmospheric pressure.
- Pressure depends on depth and density only, not on the shape or size of the container.
- Same connected fluid at rest, same level: same pressure. That is the U-tube rule.