AP Physics 1 · Unit 7 lecture · Part 10 of 11 · 7 min

7.2 to 7.4 In the labMeasuring k and g like a scientist

Mr. Thompkins
Oscillations are the best lab topic in Physics 1: periods are easy to time and the formulas turn into straight-line graphs. Experimental Design and Analysis questions love this unit. Let's do one properly.

Suppose you need to find the spring constant of a spring using only a set of masses, a stand and a stopwatch. A good procedure: hang a mass, pull it down a small distance, release it from rest, and time 10 complete oscillations. Divide by 10 to get the period. Repeat a few times and average. Then change the mass and do it again, for at least five masses. Keep everything else the same.

Pause and think
Why time 10 oscillations and divide, instead of timing just one?
I thought about it. Show me
Your reaction time adds an error of maybe 0.1 to 0.2 s at the start and the stop, no matter how many cycles you time. Spread over 10 cycles, that error becomes a tenth as big per period. The longer the measured interval, the smaller the relative error.
?Wait, what does "linearize" mean?
Rearrange an equation so that one quantity, plotted against another, makes a straight line: $y = (\text{slope})\,x + b$. Then the slope (or intercept) tells you the unknown. Straight lines are easy to fit and to read, and curved ones are not.

The spring formula is $T = 2\pi\sqrt{m/k}$. A graph of $T$ against $m$ curves (you saw that in Section 4). Square both sides instead: $T^2 = \frac{4\pi^2}{k}m$. Now $T^2$ against $m$ is a straight line through the origin with slope $\frac{4\pi^2}{k}$. For a pendulum, the same trick gives $T^2 = \frac{4\pi^2}{g}L$: graph $T^2$ against $L$ and the slope is $\frac{4\pi^2}{g}$.

m (kg)Time for 10 cycles (s)T (s)T² (s²)
0.104.00.400.16
0.205.60.560.31
0.306.90.690.48
0.407.90.790.62
0.508.90.890.79
One group's data for a spring, five masses, 10 cycles timed for each.
00.10.20.30.40.50.600.20.40.60.81m (kg)T² (s²)best fit, slope 1.58
T² against m. The data fall on a straight line through the origin, as the model predicts. The slope of the best-fit line is about 1.58 s²/kg.
?Wait, how do I find the slope of a best-fit line?
Draw one straight line that follows the trend of all the points, with about as many above as below. Then pick two points on the line itself, far apart, not two data points, and compute rise over run. Show those two points in your answer.
Find k from the graph
Use the data and graph above. (a) What quantity should be graphed against mass to get a straight line, and what does the slope represent? (b) Find the slope. (c) Find the spring constant. (d) The group's line misses the origin slightly. Give one possible reason that doesn't involve a calculation error.
00.10.20.30.40.50.600.20.40.60.81m (kg)T² (s²)best fit, slope 1.58
The best-fit line with the data points.
  1. (a) Graph $T^2$ against $m$. From $T^2 = \frac{4\pi^2}{k}m$, the slope is $\frac{4\pi^2}{k}$.
    Why?
    Earn this point by writing the linearized equation and matching it to y = (slope)x.
  2. (b) Two points on the best-fit line: $(0.10, 0.158)$ and $(0.50, 0.788)$. Slope $= \frac{0.788 - 0.158}{0.50 - 0.10} = 1.58\ \text{s}^2/\text{kg}$.
    Why?
    Points on the line, not data points, and far apart.
  3. (c) $\frac{4\pi^2}{k} = 1.58$, so $k = \frac{4\pi^2}{1.58} = \frac{39.5}{1.58} = 25\ \text{N/m}$.
    Why?
    Units: kg/s² is the same as N/m. Including units is part of the point.
  4. (d) The spring itself has some mass that also oscillates, so the real oscillating mass is a little more than the hanging mass. That shifts every point slightly.
    Why?
    A good "source of error" names a physical cause and its effect. "Human error" earns nothing.

Answer: (a) $T^2$ against $m$, slope $4\pi^2/k$. (b) About 1.58 s²/kg. (c) About 25 N/m. (d) For example, the spring's own mass adds to the oscillating mass.

Stuck? Get a hint
  1. Square both sides of the period formula.
  2. Match $T^2 = \left(\frac{4\pi^2}{k}\right)m$ to $y = (\text{slope})x$.
  3. Set the slope equal to $\frac{4\pi^2}{k}$ and solve for $k$.
Check yourself
Students graph $T^2$ against $L$ for a pendulum and find a slope of $4.0\ \text{s}^2/\text{m}$. What value of g does this give?
  1. A$4.0\ \text{m/s}^2$
  2. B$0.10\ \text{m/s}^2$
  3. C$9.9\ \text{m/s}^2$
  4. D$39\ \text{m/s}^2$
Show the answer

C. $T^2 = \frac{4\pi^2}{g}L$, so the slope is $\frac{4\pi^2}{g}$ and $g = \frac{4\pi^2}{4.0} = 9.9\ \text{m/s}^2$. Choosing 4.0 treats the slope as g itself, and 39 forgets to divide by the slope.

Exam tip from Mr. T

On a lab question, say what you vary, what you keep the same (including a small amplitude for a pendulum), what you measure and with what tool, and how you reduce error (time many cycles, repeat trials). Then say what you graph and what the slope equals in symbols.

  • Time many cycles and divide, then repeat and average.
  • Change one variable at a time and keep a small amplitude for pendulums.
  • Spring: graph $T^2$ against $m$, slope $\frac{4\pi^2}{k}$. Pendulum: $T^2$ against $L$, slope $\frac{4\pi^2}{g}$.
  • Read slopes from two far-apart points on the best-fit line.