AP Physics 1 · Unit 3 lecture · Part 6 of 10 · 10 min

3.4 Conservation of energyThe bookkeeping that never fails

Mr. Thompkins
Here's the most powerful idea in this course. Energy can't be created or destroyed. It only moves around and changes form. If you account for every joule at the start, you know exactly how many are there at the end.

Conservation of energy: the total energy of a system changes only if energy is transferred across its boundary, which in this course means work done by external forces. If no external forces do work on the system, its total energy stays constant. If, in addition, there's no friction or other process inside that turns motion into thermal energy, the mechanical energy, $K + U$, stays constant: $K_i + U_i = K_f + U_f$.

?Wait, what makes a force "conservative"?
A force is conservative when the work it does doesn't depend on the path, only on the start and end points, like gravity and springs. Those are the forces that can store energy as potential energy. Friction isn't conservative: a longer path means more energy turned into thermal energy.

Energy bar charts are the AP's favorite way to show this. Draw one bar for each kind of energy at each moment, with heights to scale. For a system with no external work and no friction, the total height of the bars stays the same; energy just moves from bar to bar. Graders check that the bars you draw match the equation you write.

A: 3.0 m, at restB: 1.0 m6.26 m/sC: bottom, 7.67 m/s3 m
A 50 kg skater starts at rest at the lip of a 3.0 m half-pipe and rolls down with negligible friction.
A: topK1470UgB: 1.0 m980K490UgC: bottom1470KUg
Energy bar charts in joules for the skater-Earth system, with $U_g$ = 0 at the bottom. The total stays 1470 J; energy moves from $U_g$ into K and back.
Speeds from energy
The 50 kg skater starts from rest at the lip of the 3.0 m half-pipe. Ignoring friction and air resistance, find her speed (a) at point B, 1.0 m above the bottom, and (b) at the bottom.
A: 3.0 m, at restB: 1.0 m6.26 m/sC: bottom, 7.67 m/s3 m
  1. System: skater + Earth. The only external force on the skater is the normal force from the ramp, which is always perpendicular to her motion, so it does no work. No friction. Mechanical energy is conserved.
    Why?
    Justify conservation in writing. "The normal force is perpendicular to the motion" is the sentence graders look for on curved tracks.
  2. (a) $mgh_A = mgh_B + \frac12 mv_B^2$. Mass cancels: $v_B = \sqrt{2g(h_A - h_B)} = \sqrt{2(9.8)(2.0)} = 6.26$ m/s.
  3. (b) $mgh_A = \frac12 mv_C^2$, so $v_C = \sqrt{2gh_A} = \sqrt{2(9.8)(3.0)} = 7.67$ m/s.
    Why?
    The shape of the ramp never entered. Only the height drop matters, which is why energy beats forces on curved paths.

Answer: (a) 6.3 m/s. (b) 7.7 m/s.

Stuck? Get a hint
  1. Write K + U at the start and at the point you want. Set them equal.
  2. She starts at rest, so K starts at zero. Pick $U_g$ = 0 at the bottom.
  3. $v = \sqrt{2g\,\Delta h}$, with $\Delta h$ the drop.
Pause and think
A heavier skater (80 kg) starts from the same spot. Is she faster, slower, or the same speed at the bottom?
I thought about it. Show me
The same, 7.67 m/s. Both her potential energy and her kinetic energy are proportional to her mass, so mass cancels in $mgh = \frac12 mv^2$. She carries more energy, but she needs more to reach the same speed.
?Wait, how do I solve $mgh = \frac12 mv^2$ for $v$?
Cancel $m$ from both sides: $gh = \frac12 v^2$. Multiply by 2: $v^2 = 2gh$. Take the square root: $v = \sqrt{2gh}$. The same answer comes from $v^2 = v_0^2 + 2a\Delta y$ in free fall, which is a nice check.
A roller coaster
A roller coaster car passes the top of a hill at 4.0 m/s and coasts down to a dip 18 m lower. Ignoring friction, how fast is it moving in the dip?
  1. System: car + Earth, no friction, normal force perpendicular to the track: $\frac12 mv_1^2 + mgh_1 = \frac12 mv_2^2 + mgh_2$.
  2. Cancel $m$ and solve: $v_2 = \sqrt{v_1^2 + 2g(h_1 - h_2)} = \sqrt{4.0^2 + 2(9.8)(18)} = \sqrt{368.8} = 19.2$ m/s.
    Why?
    Add the energies, not the speeds. The 4.0 m/s does not just add on to the speed from the drop.

Answer: About 19 m/s.

Check yourself
Two identical balls leave the top of a building with the same speed. Ball A is thrown horizontally, ball B straight up. Ignoring air resistance, how do their speeds compare when they hit the ground?
  1. AA hits faster.
  2. BB hits faster.
  3. CThey hit at the same speed.
  4. DIt depends on the height of the building.
Show the answer

C. Same mass, same starting speed, same height drop: same $K_i + U_i$, so the same $K_f$ at ground level. Energy is a scalar, so the direction of the throw doesn't matter. Their landing directions and times differ, but not their speeds.

Exam tip from Mr. T

On "justify" questions, name the system and state why energy is conserved: "The track is frictionless and the normal force does no work because it is perpendicular to the velocity, so the mechanical energy of the car-Earth system is constant." Then write the equation.

  • A system's total energy changes only through work done by external forces.
  • No external work and no friction: $K_i + U_i = K_f + U_f$ (mechanical energy conserved).
  • Bar charts: one bar per energy form per moment; the total stays fixed for an isolated system.
  • Height drop only: $v = \sqrt{v_0^2 + 2g\Delta h}$ for any frictionless path. Mass cancels.