AP Physics 1 · Unit 3 lecture · Part 8 of 10 · 10 min

3.4 Conservation of energySprings, launches and loops

Mr. Thompkins
Now let's combine everything: a spring launcher, a ramp, and a loop-the-loop. Problems like these look scary because they have several stages, but energy lets you jump from any point straight to any other point, as long as you know what happens in between.

A spring launcher stores energy $\frac12 kx^2$ when compressed. Released, the spring pushes the object and that energy turns into kinetic energy. As the spring relaxes, $U_s$ shrinks and $K$ grows, but on a frictionless surface their sum stays fixed. The graph below tracks both as the compression goes from 0.15 m to zero.

00.050.10.150246810compression left (m)energy (J)total 9.0 J$U_s$$K$
A 0.20 kg ball pushed by an 800 N/m spring compressed 0.15 m, on a frictionless surface. As the spring relaxes, its energy (green) becomes the ball's kinetic energy (blue). The total is always 9.0 J.
?Wait, what's the spring energy formula again?
$U_s = \frac12 kx^2$, with $x$ the stretch or compression from the rest length and $k$ the spring constant in N/m. For 800 N/m and 0.15 m: $\frac12(800)(0.15)^2 = 9.0$ J.
Launch and climb
A spring with $k = 800$ N/m is compressed 0.15 m and launches a 0.20 kg ball along a frictionless track that then curves up a ramp. Find (a) the ball's speed when it leaves the spring and (b) the greatest height it reaches.
  1. System: ball + spring + Earth. No friction, the track's normal force does no work, so $K + U_s + U_g$ is constant. Stored energy: $U_s = \frac12(800)(0.15)^2 = 9.0$ J.
  2. (a) When the spring is back at rest length, all 9.0 J is kinetic: $\frac12(0.20)v^2 = 9.0$, so $v = \sqrt{\frac{2(9.0)}{0.20}} = 9.49$ m/s.
  3. (b) At the highest point it is momentarily at rest, so all 9.0 J is $U_g$: $h = \frac{9.0}{(0.20)(9.8)} = 4.59$ m.
    Why?
    You can skip stage (a) entirely for (b): go straight from compressed spring to highest point. That is the power of energy.

Answer: (a) About 9.5 m/s. (b) About 4.6 m.

Stuck? Get a hint
  1. Find the stored energy first: ½kx².
  2. Leaving the spring: all of it is K. At the top: all of it is $U_g$.
  3. $h = \frac{U_s}{mg}$.
compressed9.0UsKUgleaves springUs9.0KUghighest pointUsK9.0Ug
Bar charts in joules for the ball-spring-Earth system: compressed, leaving the spring, at the highest point. The 9.0 J moves from Us to K to Ug.
Pause and think
If the spring were compressed twice as far, how high would the ball go?
I thought about it. Show me
Four times as high, about 18.4 m. The stored energy is $\frac12 kx^2$, so doubling $x$ quadruples it, and the height is proportional to the energy.

Now the loop. A ball rolls down a frictionless ramp and around a vertical loop of radius $R$. What's the lowest starting height that gets it around without falling off at the top? This needs two units at once. From Unit 2: at the top of the loop, the slowest possible speed is when the track barely touches the ball, so gravity alone provides the centripetal force: $mg = \frac{mv^2}{R}$, so $v_{top}^2 = gR$. From this unit: energy tells you the speed at the top for any starting height.

$h$ = 2.5R2R$F_g$ onlytop: $v = \sqrt{gR}$
A loop of radius R. At the minimum release height, gravity alone holds the ball in the circle at the top, where v = √(gR).
?Wait, why is the net force at the top of a loop $\frac{mv^2}{R}$?
From Unit 2's circular motion: anything moving in a circle needs a net force toward the center of size $\frac{mv^2}{r}$. At the top of the loop the center is straight down, so gravity and the track's normal force, both pointing down, supply it. At the minimum speed, the normal force is zero.
The minimum height for a loop
Derive the minimum release height $h$ (above the bottom of the loop) for a ball to make it around a frictionless loop of radius $R$. Then evaluate it for $R = 0.40$ m. (Treat the ball as sliding without rolling.)
$h$ = 2.5R2R$F_g$ onlytop: $v = \sqrt{gR}$
  1. Top of loop, minimum speed: $F_N = 0$, so $mg = \frac{mv_{top}^2}{R}$ and $v_{top}^2 = gR$.
    Why?
    This is the condition that sets the minimum. Any slower and gravity would pull the ball inward more than the circle needs.
  2. Energy from release to the top of the loop (height $2R$): $mgh = mg(2R) + \frac12 mv_{top}^2$.
    Why?
    System: ball + Earth. Frictionless track, normal force perpendicular to the motion: mechanical energy conserved.
  3. Substitute: $mgh = 2mgR + \frac12 mgR$, so $h = 2.5R$.
    Why?
    Mass and g cancel, leaving a result that depends only on the loop size.
  4. For $R = 0.40$ m: $h = 2.5(0.40) = 1.0$ m.
    Why?
    Release lower than 1.0 m and the ball loses contact before the top. Release exactly at 2R = 0.80 m and it does not come close: it falls off well before the top.

Answer: $h = \frac52 R$; 1.0 m for a 0.40 m loop.

Stuck? Get a hint
  1. At the top, the minimum speed has $F_N$ = 0, so mg = mv²/R.
  2. The top of the loop is at height 2R above the bottom.
  3. Energy: mgh = mg(2R) + ½m(gR).
Check yourself
A block on a frictionless table is pushed against a spring, compressing it by $x$, and released. It leaves at speed $v$. If the same spring is compressed by $2x$, what is the launch speed?
  1. A$v$
  2. B$\sqrt2\,v$
  3. C$2v$
  4. D$4v$
Show the answer

C. $\frac12 kx^2 = \frac12 mv^2$ gives $v = x\sqrt{k/m}$, so $v \propto x$. Double the compression, double the speed. Choice D is the energy factor, not the speed factor.

Exam tip from Mr. T

Multi-stage problems: mark the points (A, B, C...) on the diagram, then write energy between the two points the question asks about. Use forces only where you need them, usually for a condition like "barely makes it" or "loses contact".

  • Spring launch: $\frac12 kx^2 = \frac12 mv^2$ (frictionless), so $v \propto x$.
  • Energy jumps between any two points; you do not need the stages in between if no energy leaves.
  • Combine with Unit 2 for conditions: top of a loop at minimum speed, $v^2 = gR$.
  • Minimum release height for a frictionless loop: $h = 2.5R$.