AP Physics 1 · Unit 3 lecture · Part 3 of 10 · 9 min

3.2 WorkWork from graphs, and the work-energy theorem

Mr. Thompkins
Two upgrades to work. First, what if the force changes as the object moves? Use the graph. Second, what does work actually do to an object? It changes its kinetic energy, and that one fact solves a whole family of problems.

When a force changes along the way, $Fd\cos\theta$ doesn't work directly. But you already know the trick from Unit 1: on a graph of force (along the motion) against position, work is the area under the curve. That's because for each tiny step, the work is force times step, a thin rectangle of area. Area above the axis is positive work; below the axis, negative work.

012345678024681012position x (m)force (N)area = 60 J
A force that stays at 10 N for 4 m, then drops steadily to zero at 8 m. The work it does is the shaded area: 40 J + 20 J = 60 J.
?Wait, what did area mean on Unit 1 graphs?
Area under a velocity-time graph was displacement, because velocity times time is distance. Same logic here: force times distance is work, so the area under a force-position graph is work. Always multiply the axis units to see what an area means: N times m is J.

Now the work-energy theorem: the net work done on an object equals its change in kinetic energy, $W_{net} = \Delta K = \frac12 mv_f^2 - \frac12 mv_i^2$. "Net work" means the sum of the works done by every force (or, the same thing, the work done by the net force). Positive net work speeds the object up, negative net work slows it down, zero net work leaves the speed unchanged.

?Wait, what's the net force and why does it matter here?
From Unit 2: the net force is the vector sum of all the forces on an object, and it equals $ma$. The work done by the net force over a displacement is the net work. Since the net force is what changes the speed, it makes sense that the net work is what changes the kinetic energy.
From a graph to a speed
The force in the graph is the only horizontal force on a 3.0 kg cart on a frictionless track. The cart starts from rest at $x = 0$. Find its speed at $x = 8.0$ m.
012345678024681012position x (m)force (N)area = 60 J
  1. Work = area: rectangle $(10)(4) = 40$ J plus triangle $\frac12(4)(10) = 20$ J, so $W = 60$ J.
    Why?
    Break the shape into pieces you know. Units: newtons times meters is joules.
  2. It's the only force doing work (gravity and the normal force are vertical), so $W_{net} = 60$ J $= \Delta K = \frac12 mv^2 - 0$.
  3. $v = \sqrt{\frac{2W}{m}} = \sqrt{\frac{2(60)}{3.0}} = \sqrt{40} = 6.32$ m/s.
    Why?
    Notice the cart is still speeding up from 4 m to 8 m even though the force is shrinking. A smaller force is still a forward force.

Answer: About 6.3 m/s.

Stuck? Get a hint
  1. Find the area under the graph: a rectangle plus a triangle.
  2. Set that work equal to $\frac12 mv^2$, since it starts from rest.
  3. $v = \sqrt{2W/m}$.

Here's the graph for a spring. Hooke's law says the spring's force grows in proportion to the stretch, $F = kx$, so the graph is a straight line through the origin, and the area under it from 0 to $x$ is a triangle: $\frac12(x)(kx) = \frac12 kx^2$. That's the work needed to stretch (or compress) a spring, and you'll meet it again as stored spring energy in Section 4.

00.050.10.150.20.2501020304050stretch x (m)spring force (N)area = $\frac12 kx^2$ = 4.0 Jslope k = 200 N/m
Force needed to stretch a 200 N/m spring against the stretch. The triangle up to 0.20 m has area ½(0.20)(40) = 4.0 J.
Pause and think
Stretching that spring from 0 to 0.10 m takes 1.0 J. How much work does stretching it from 0.10 m to 0.20 m take?
I thought about it. Show me
3.0 J. The total from 0 to 0.20 m is 4.0 J, and the first 0.10 m took 1.0 J, so the second 0.10 m takes 3.0 J. The spring gets harder to stretch as it goes, so equal steps don't take equal work.
Stopping distance, with energy
A 1200 kg car moving at 20 m/s locks its brakes and skids to a stop on level road with $\mu_k = 0.70$. Use the work-energy theorem to find the skid distance.
  1. Net work: only friction does work (gravity and the normal force are vertical): $W_{net} = -f_k d = -\mu_k mg d$.
    Why?
    Friction points backward while the car moves forward, so its work is negative.
  2. $\Delta K = 0 - \frac12 mv_0^2$. Set them equal: $-\mu_k mgd = -\frac12 mv_0^2$.
    Why?
    The work-energy theorem: net work equals change in kinetic energy.
  3. Mass cancels: $d = \frac{v_0^2}{2\mu_k g} = \frac{20^2}{2(0.70)(9.8)} = 29.2$ m.
    Why?
    Same result as the Unit 1 stopping-distance formula, with a = μk g. Double the speed, four times the distance. A heavier car skids the same distance on the same tires.

Answer: About 29 m.

Stuck? Get a hint
  1. Which force does work? Write its work with the correct sign.
  2. The car ends at rest, so $\Delta K = -\frac12 mv_0^2$.
  3. $\mu_k mgd = \frac12 mv_0^2$; cancel $m$.
Check yourself
A 2.0 kg ball speeds up from 3.0 m/s to 5.0 m/s. What is the net work done on it?
  1. A4.0 J
  2. B8.0 J
  3. C16 J
  4. D34 J
Show the answer

C. $W_{net} = \frac12(2.0)(5.0^2) - \frac12(2.0)(3.0^2) = 25 - 9.0 = 16$ J. Choice A uses $\frac12 m(\Delta v)^2$, squaring the difference instead of taking the difference of the squares.

Exam tip from Mr. T

The work-energy theorem is for the net work on a single object. If a problem asks about one force (like "work done by friction"), give only that force's work. If it asks for net work, add every force's work, or just compute $\Delta K$.

  • Work by a changing force = area under the force-position graph (below the axis counts negative).
  • Work-energy theorem: $W_{net} = \Delta K$.
  • Work to stretch or compress a spring by x from rest length: $\frac12 kx^2$ (a triangle).
  • Skid distance: $d = \frac{v_0^2}{2\mu_k g}$, independent of mass.