AP Physics 1 · Unit 3 lecture · Part 2 of 10 · 9 min

3.2 WorkHow forces move energy

Mr. Thompkins
Push against a brick wall until you're exhausted. How much work did you do on the wall? In physics, zero. That's not a joke: "work" means something precise here, and it's the bridge between forces and energy.

Work is energy transferred into or out of a system by an external force acting through a displacement. For a constant force, $W = Fd\cos\theta$, where $d$ is the size of the displacement of the point where the force acts and $\theta$ is the angle between the force and the displacement. Another way to say it: work is the component of the force along the displacement, times the displacement, $W = F_\parallel d$.

$F$$F\cos\theta$: does work$F\sin\theta$: no work$\theta$displacement $d$
A force at angle θ to the displacement. Only the part along the motion, F cos θ, does work. The perpendicular part, F sin θ, does none.
?Wait, what's $\cos\theta$ for the common angles?
$\cos 0° = 1$, $\cos 30° = 0.866$, $\cos 60° = 0.50$, $\cos 90° = 0$, $\cos 180° = -1$. As the force turns from along the motion to perpendicular to it, the useful part shrinks from all of it to none of it.

The sign of work tells you which way energy flows. Positive work means the force adds energy to the system: it has a component along the motion. Negative work means the force removes energy: it has a component against the motion, like kinetic friction on a sliding box. Zero work means the force is perpendicular to the motion, or the point it acts on doesn't move at all. That's the wall: no displacement, no work. (Your muscles still use chemical energy internally, which is why you get tired.)

Angle between F and dcos θWorkExample
0° (along the motion)1Positive: energy inPushing a cart forward
90° (perpendicular)0ZeroNormal force on a sliding box
180° (against the motion)−1Negative: energy outKinetic friction
Between 0° and 90°0 to 1Positive, less than FdPulling a sled by an angled rope
The angle between the force and the displacement decides the sign of the work.
$F_N$: 0 J$F_g$: 0 Jpush: +$f_k$: −
A box pushed across a rough floor. The push does positive work and friction negative work. Gravity and the normal force are perpendicular to the motion, so they do zero work.
Work by an angled force
You pull a rolling suitcase 15 m along a level hallway with a 60 N force directed 30° above the horizontal. How much work does your pull do on the suitcase?
  1. The displacement is horizontal, 15 m. The angle between the force and the displacement is 30°.
    Why?
    Always find the angle between the force and the displacement, not between the force and the floor (here they happen to match).
  2. $W = Fd\cos\theta = (60)(15)\cos 30° = (60)(15)(0.866) = 779$ J.
    Why?
    Equivalently, the horizontal component $60\cos 30° = 52.0$ N times 15 m. The vertical component lifts the handle but does no work on the suitcase's horizontal trip.

Answer: About 780 J.

Stuck? Get a hint
  1. What angle does the force make with the displacement?
  2. Use $W = Fd\cos\theta$.
  3. $(60)(15)(\cos 30°)$.
Pause and think
A ball on a string whirls in a horizontal circle at constant speed. How much work does the tension do on it during one full turn?
I thought about it. Show me
Zero. The tension always points toward the center, and the velocity is always tangent, so the force is perpendicular to the motion at every instant. That matches the kinetic energy: the speed never changes, so no energy is added or removed.
Negative work
A 5.0 kg box slides 3.0 m across a level floor with $\mu_k = 0.40$ before stopping. Find the work done on the box by (a) friction, (b) the normal force and (c) gravity.
  1. (a) $F_N = mg = 49$ N, so $f_k = \mu_k F_N = (0.40)(49) = 19.6$ N. Friction points opposite the displacement: $\theta = 180°$, so $W_f = (19.6)(3.0)\cos 180° = -58.8$ J.
    Why?
    Negative: friction takes kinetic energy out of the box. In fact the box must have started with 58.8 J of kinetic energy.
  2. (b) The normal force is vertical, the motion horizontal: $W_N = 0$.
  3. (c) Gravity is vertical too: $W_g = 0$.
    Why?
    Gravity only does work when the object moves up or down. On a level floor, it does none.

Answer: (a) $-58.8$ J. (b) 0. (c) 0.

?Wait, why is kinetic friction $\mu_k F_N$?
From Unit 2: when surfaces slide, the friction force is the coefficient of kinetic friction times the normal force, $f_k = \mu_k F_N$, pointing against the sliding. On a level floor with no other vertical forces, $F_N = mg$.
Check yourself
A student carries a heavy box horizontally across a room at constant velocity. How much work does the upward force of the student's arms do on the box?
  1. APositive, equal to the box's weight times the distance
  2. BNegative, because the box would otherwise fall
  3. CZero, because the force is perpendicular to the displacement
  4. DIt depends on how fast the student walks
Show the answer

C. The arms push straight up and the box moves horizontally, so the angle is 90° and the work is zero. Choice A multiplies the force by a distance that is not along it. It feels like work to the student, but no energy goes into the box.

Exam tip from Mr. T

Graders reward stating the angle: "The normal force is perpendicular to the displacement, so it does no work." That sentence is often the whole justification for a zero.

  • Work by a constant force: $W = Fd\cos\theta = F_\parallel d$, in joules. A scalar.
  • Positive work adds energy to the system; negative work removes it.
  • Zero work: force perpendicular to the motion, or no displacement of the point where it acts.
  • Kinetic friction does negative work on a sliding object. Normal force and gravity do none on level ground.