AP Physics 1 · Unit 2 lecture · Part 11 of 11 · 9 min

Unit 2 wrap-upPut it together

Mr. Thompkins
That was a lot, and you got through it. Here's the good news: every problem in this unit uses the same routine. System, diagram, positive direction, second law in each direction. The forces change; the routine doesn't.
SituationWhat to write
At rest or constant velocityΣF = 0 in every direction (first law)
Speeding up, slowing down, or curvingΣF = ma, positive the way it accelerates
Surface pushing$F_N$: whatever the perpendicular equation says, not always mg
Sliding / not sliding$f_k$ = μk $F_N$ / $f_s$ up to μs $F_N$
Spring|$F_s$| = k|Δx|, toward the rest length
Moving in a circleNet inward force = mv²/r, no extra arrow
Unit 2 on one page: what to write for each kind of situation.
?Wait, when do I use the first law instead of the second?
The first law is just the second law with $a = 0$. If the object is at rest or moving at constant velocity in a direction, write $\Sigma F = 0$ in that direction. If it accelerates in a direction, write $\Sigma F = ma$. Most problems use both: one in each direction.

Here's how the topics connect. Systems (2.1) decide which forces count. Free-body diagrams (2.2) list them. The third law (2.3) pairs forces between objects and explains why internal forces cancel. The first and second laws (2.4, 2.5) turn the diagram into equations. Gravity, friction and springs (2.6 to 2.8) are the specific forces that go into those equations. And circular motion (2.9) is the second law with an acceleration that points toward the center.

?Wait, how do I find a force between two objects in a system?
Make a new system that contains only one of the objects, so the force you want becomes external to it. Write the second law for that object alone. In the cart-and-block problem, the tension was internal to the pair, so we switched to the cart alone and got $F_T = m_1 a$.
Pause and think
A box sits on the floor of a truck that speeds up forward. The box doesn't slide. Which force accelerates the box, and which way does it point?
I thought about it. Show me
Static friction from the truck's floor, pointing forward. The box accelerates forward with the truck, so the net force on it must point forward, and friction is the only horizontal force. Friction is opposing the box's tendency to slide backward relative to the floor.

Traps that cost points

✕ Drawing a "force of motion" or "force of the throw".
✓ Every force needs an object that exerts it, right now.
✕ Assuming $F_N$ = mg every time.
✓ Find $F_N$ from the perpendicular equation: ramps, angled pulls and elevators change it.
✕ Cancelling third-law pairs.
✓ They act on different objects. Only forces on the same object cancel.
✕ Using μs $F_N$ as the static friction force.
✓ It is the maximum. Actual static friction is whatever the first or second law needs.
✕ Adding a centripetal force arrow.
✓ Centripetal is the net inward force, provided by real forces already on the diagram.
✕ Thinking constant velocity needs a net force forward.
✓ Constant velocity means zero net force.
✕ Saying the tension equals the hanging weight in an accelerating system.
✓ If the hanging block accelerates down, tension is less than its weight.
✕ Measuring r from the surface in gravity problems.
✓ r is center to center.
✕ Drawing gravity perpendicular to a ramp.
✓ Gravity is always straight down. Split it in the equations.

Key relationships for Unit 2

$\vec a_{sys} = \frac{\Sigma \vec F}{m_{sys}}$
Newton's second lawAny accelerating system; ΣF = 0 for equilibrium
$x_{cm} = \frac{\Sigma m_i x_i}{\Sigma m_i}$
Center of massLocating the point that moves like the whole system
$\vec F_{AB} = -\vec F_{BA}$
Newton's third lawForces between two objects
$F_g = G\frac{m_1 m_2}{r^2}$
Universal gravitationPlanets, satellites, ratio questions
$g = \frac{GM}{r^2},\ \ F_g = mg$
Gravitational field and weight9.8 N/kg at Earth's surface
$f_k = \mu_k F_N,\ \ f_s \le \mu_s F_N$
FrictionSliding / not sliding
$|F_s| = k|\Delta x|$
Hooke's lawSprings stretched or compressed
$a_c = \frac{v^2}{r},\ \ v = \frac{2\pi r}{T}$
Circular motionNet inward force = mv²/r

FRQ strategy for Unit 2

  1. Free-body diagram first, with a dot, labeled arrows that start on it, honest lengths and only real forces.
  2. Name the system for every equation. Switch systems to find a force between two objects.
  3. Derivations: start from ΣF = ma in symbols, substitute the forces from your own diagram, use only the listed variables, and simplify before any numbers.
  4. Graphs (like a scale reading against time): split the motion into intervals, find the acceleration in each, and make each interval consistent with your equation.
  5. Paragraphs: claim first, then the law (first, second or third) and the specific forces that change, then link to your equation: "according to my expression, as μ increases, the tension ...".
  6. Experiments: keep the object at constant velocity or at rest when you want a force to equal friction or weight, and make a linear graph (friction against normal force, spring force against stretch) whose slope is the constant you want.
Mixed FRQ practice
A 3.0 kg block and a 2.0 kg block sit on a rough floor ($\mu_k = 0.20$ under both), joined by a light string. A 30 N horizontal force pulls the 3.0 kg block, and both slide. (a) Find the acceleration. (b) Find the string tension. (c) The floor is replaced by a rougher one, still with the same $\mu_k$ under both blocks and both still sliding. Does the tension increase, decrease or stay the same? Justify using your equations.
2.0 kgstring3.0 kg30 N$\mu_k$ = 0.20 under both blocks
  1. (a) System: both blocks, 5.0 kg. External horizontal forces: the 30 N pull forward and friction on both blocks backward, $\mu_k(m_1 + m_2)g = (0.20)(5.0)(9.8) = 9.8$ N.
    Why?
    The string tension is internal to this system, so it drops out. Each block's normal force equals its weight on level ground.
  2. $a = \frac{30 - 9.8}{5.0} = 4.04\ \text{m/s}^2$.
  3. (b) System: the rear 2.0 kg block. Forces along the motion: tension forward, friction $\mu_k m_2 g = 3.92$ N backward. $F_T - 3.92 = (2.0)(4.04)$, so $F_T = 12.0$ N.
    Why?
    Switch systems so the force you want is external.
  4. (c) In symbols: $a = \frac{F}{m_1 + m_2} - \mu_k g$, and $F_T = m_2 a + \mu_k m_2 g = \frac{m_2}{m_1 + m_2}F$. The $\mu_k$ terms cancel, so the tension stays the same: $\frac{2.0}{5.0}(30) = 12$ N.
    Why?
    A rougher floor lowers the acceleration, but the extra friction on the rear block is exactly made up by its smaller ma. Claim, equation, link: the full paragraph.

Answer: (a) 4.04 m/s². (b) 12.0 N. (c) Stays the same: $F_T = \frac{m_2}{m_1 + m_2}F$ has no $\mu_k$ in it.

Stuck? Get a hint
  1. For the acceleration, use both blocks as one system: the string is internal.
  2. For the tension, use the rear block alone.
  3. Write $F_T$ in symbols and look for $\mu_k$: does it survive?
Check yourself
A 2.0 kg book is pushed against a ceiling by a 50 N upward force and stays at rest. What is the normal force from the ceiling on the book?
  1. A19.6 N down
  2. B30.4 N down
  3. C50 N down
  4. D69.6 N down
Show the answer

B. Up positive, at rest: $50 - mg - F_N = 0$, so $F_N = 50 - 19.6 = 30.4$ N, pointing down (a ceiling pushes down). Choice D adds the weight instead of subtracting it.

Check yourself
An elevator is moving downward and slowing to a stop. How does the scale reading of a passenger compare with her weight?
  1. ALess than her weight
  2. BEqual to her weight
  3. CGreater than her weight
  4. DZero
Show the answer

C. Moving down and slowing means the acceleration points up. With up positive, $F_N = m(g + a)$ with $a > 0$, so the scale reads more than her weight. The direction of motion does not decide it; the direction of acceleration does.

Mr. Thompkins
That's Unit 2, the heaviest unit on the exam, done. Take the Unit 2 quiz next, and watch the Unit 2 video classes if you want me drawing these diagrams live. When you miss a question, come back here and open the recall cards in that section. See you in Unit 3, where we trade forces for energy.