AP Physics 1 · Unit 2 lecture · Part 10 of 11 · 11 min

2.9 Circular motionCentripetal is a job, not a force

Mr. Thompkins
A car goes around a curve at a steady 20 m/s. Is it accelerating? The speedometer never moves, so it seems like no. But its velocity keeps changing direction, and a change in velocity is acceleration. So something must be pushing it toward the inside of the curve.

An object moving in a circle at constant speed is in uniform circular motion. Its velocity is always tangent to the circle, and its direction changes continuously. The acceleration that changes the direction points toward the center of the circle. It's called centripetal ("center-seeking") acceleration, and its size is $a_c = \frac{v^2}{r}$.

$\vec v$: tangent$\vec a$: toward center$a_c = \frac{v^2}{r}$speed constant,direction changing
Uniform circular motion. At every point the velocity (blue) is tangent to the circle and the acceleration (red) points toward the center.
?Wait, how can there be acceleration if the speed doesn't change?
Acceleration is any change in velocity, and velocity is a vector, so changing its direction counts. In Unit 1 the acceleration was along the motion (speeding up or slowing down). In circular motion it's perpendicular to the motion, so it turns the velocity without changing the speed.

By the second law, an acceleration toward the center needs a net force toward the center: $\Sigma F_{in} = \frac{mv^2}{r}$. Here's the big idea: that net force isn't a new kind of force. It's provided by real forces you already know. Tension for a ball on a string, static friction for a car on a flat curve, gravity for the Moon around Earth, the normal force for a rider on the wall of a spinning ride. "Centripetal" is a job description, and some real force has to do the job.

For one full trip around the circle, the time is the period $T$, and the distance is the circumference, so $v = \frac{2\pi r}{T}$. Faster speed or tighter radius means bigger acceleration, and since $v$ is squared, speed matters most: double the speed on the same curve and the needed inward force quadruples.

?Wait, what's the circumference of a circle?
The distance around a circle of radius $r$ is $2\pi r$. A 0.80 m string traces a circle 5.03 m around. If the ball goes around once every 1.26 s, its speed is $\frac{5.03}{1.26} = 4.0$ m/s.
$F_N$$F_g$$f_s$ (to center)
A car on a flat curve that bends to the left. Gravity and the normal force balance vertically. Static friction points toward the center and is the net force that turns the car.
The flat curve
A car rounds a flat curve of radius 50 m. The coefficient of static friction between tires and road is 0.80. What is the maximum speed it can take the curve without skidding?
$F_N$$F_g$$f_s$ (to center)
  1. System: the car. Vertical: $F_N = mg$. Horizontal, toward the center: only static friction, so $f_s = \frac{mv^2}{r}$.
    Why?
    Static, because the tires are not sliding sideways. Toward the center, because friction is doing the centripetal job.
  2. At the maximum speed, friction is at its limit: $\mu_s mg = \frac{mv_{max}^2}{r}$.
    Why?
    Any faster and the needed inward force would exceed what static friction can give, and the car would slide outward.
  3. Mass cancels: $v_{max} = \sqrt{\mu_s g r} = \sqrt{(0.80)(9.8)(50)} = 19.8$ m/s.
    Why?
    A truck and a sports car on the same tires and road have the same limit. On ice, μs drops and so does the safe speed.

Answer: About 20 m/s (about 71 km/h).

Stuck? Get a hint
  1. Which real force points toward the center on a flat road?
  2. Set the maximum static friction, $\mu_s mg$, equal to $mv^2/r$.
  3. Cancel m and solve for v.

In a vertical circle, the speed and the forces change around the loop, but at the top and the bottom the analysis is clean because everything lines up with the center. Take a 0.20 kg ball on a 0.80 m string at 4.0 m/s. It needs a net inward force of $\frac{mv^2}{r} = \frac{(0.20)(16)}{0.80} = 4.0$ N at every point.

$F_T$ 2.04 N$F_g$ 1.96 N$F_T$ 5.96 N$F_g$ 1.96 Ntop: both pointto the centerbottom: tensionbeats gravitynet = $mv^2/r$ = 4.0 N
A 0.20 kg ball on a 0.80 m string, at 4.0 m/s at the top and at the bottom. The net force toward the center is 4.0 N at both points, but the tension is very different.
Top and bottom of a vertical circle
For the ball above, find the tension in the string (a) at the top and (b) at the bottom, assuming it moves at 4.0 m/s at both points.
$F_T$ 2.04 N$F_g$ 1.96 N$F_T$ 5.96 N$F_g$ 1.96 Ntop: both pointto the centerbottom: tensionbeats gravitynet = $mv^2/r$ = 4.0 N
  1. Positive toward the center in both cases. Weight: $mg = (0.20)(9.8) = 1.96$ N.
    Why?
    Using "toward the center" as positive means $a_c$ is always positive. Use it for every circular problem.
  2. (a) Top: the center is below, so both tension and gravity point toward it: $F_T + mg = \frac{mv^2}{r}$, so $F_T = 4.0 - 1.96 = 2.04$ N.
    Why?
    Gravity is helping with the centripetal job at the top, so the string does less.
  3. (b) Bottom: the center is above, so tension points toward it and gravity away: $F_T - mg = \frac{mv^2}{r}$, so $F_T = 4.0 + 1.96 = 5.96$ N.
    Why?
    The string has to beat gravity and still supply 4.0 N inward. That is why strings snap at the bottom of the swing.

Answer: (a) 2.04 N. (b) 5.96 N.

Stuck? Get a hint
  1. Make "toward the center" positive.
  2. At the top, gravity points toward the center. At the bottom, away from it.
  3. Top: $F_T = \frac{mv^2}{r} - mg$. Bottom: $F_T = \frac{mv^2}{r} + mg$.
Pause and think
At the top of the circle, what's the slowest the ball can go and still keep the string taut?
I thought about it. Show me
The string goes slack when $F_T = 0$, so gravity alone does the centripetal job: $mg = \frac{mv^2}{r}$, which gives $v_{min} = \sqrt{gr} = \sqrt{(9.8)(0.80)} = 2.8$ m/s. Slower than that, gravity pulls the ball inward more than the circle needs, and it falls out of the circle.
Check yourself
A ball on a string is whirled in a horizontal circle. At one instant the string breaks. Which way does the ball move just after?
  1. AStraight toward the center
  2. BStraight away from the center
  3. CAlong the tangent to the circle at that point
  4. DIt keeps curving, then straightens out
Show the answer

C. Once the string breaks, no horizontal force acts, so by the first law the ball keeps the velocity it had: tangent to the circle. Choice B describes a "centrifugal force" that does not exist in the ground frame.

Check yourself
A free-body diagram for a car on a flat curve should include which forces?
  1. AGravity, normal force, static friction toward the center, and a centripetal force
  2. BGravity, normal force and static friction toward the center
  3. CGravity, normal force and a centrifugal force away from the center
  4. DGravity and a centripetal force only
Show the answer

B. Centripetal force is the net inward force, here provided by friction. Drawing it as an extra arrow counts friction twice. Graders take off for any "centripetal" or "centrifugal" arrow.

Exam tip from Mr. T

On circular-motion FRQs, write the second law with "toward the center" as positive: $\Sigma F_{in} = \frac{mv^2}{r}$. Then list the real forces with plus signs for inward, minus for outward. Never draw or name a centripetal force on the diagram.

  • Uniform circular motion: constant speed, velocity tangent, acceleration $a_c = \frac{v^2}{r}$ toward the center.
  • Net inward force: $\Sigma F_{in} = \frac{mv^2}{r}$, provided by real forces (tension, friction, gravity, normal).
  • Period: $v = \frac{2\pi r}{T}$.
  • Flat curve: $v_{max} = \sqrt{\mu_s g r}$. Vertical circle: tension is smallest at the top, largest at the bottom.
  • If the inward force disappears, the object moves off along the tangent.