AP Physics 1 · Unit 2 lecture · Part 7 of 11 · 9 min

2.7 Kinetic and static frictionFriction: two kinds, two rules

Mr. Thompkins
Push a heavy cabinet. At first nothing happens, then suddenly it lurches and gets easier to keep moving. That's two different kinds of friction taking turns, and the exam loves the moment one switches to the other.

Friction is the part of a surface's contact force that runs along the surface. It opposes sliding between the two surfaces, or the tendency to slide. When the surfaces slide past each other, it's kinetic friction, and its size is $f_k = \mu_k F_N$. The coefficient of kinetic friction $\mu_k$ is a number with no units that depends on the two materials. To a good approximation kinetic friction doesn't depend on the speed or on the contact area.

When the surfaces don't slide, it's static friction, and it works differently: it's exactly as big as it needs to be to prevent sliding, up to a maximum. $f_s \le \mu_s F_N$. Push a cabinet with 50 N and static friction pushes back with 50 N. Push with 90 N, it pushes back with 90 N. Only when your push would exceed $\mu_s F_N$ does the cabinet break free. For most surfaces $\mu_s$ is larger than $\mu_k$, which is why it's harder to start something moving than to keep it moving.

?Wait, why does friction depend on the normal force?
The normal force measures how hard the two surfaces press together. Press harder and the tiny bumps on each surface dig into each other more, so it's harder to slide them. That's why friction is $\mu$ times $F_N$, and why you must find $F_N$ from the perpendicular equation first. It's not always $mg$.
020406080100120140160020406080100120140horizontal push (N)friction (N)$\mu_s F_N$ = 117.6 Nstatic = pushkinetic: 73.5 N
Friction on a 30 kg cabinet as the push grows (μs = 0.40, μk = 0.25). Static friction matches the push up to 117.6 N; then the cabinet slides and kinetic friction drops to a steady 73.5 N.
Pause and think
The cabinet is at rest and you push it with 60 N. What's the friction force on it? Is it 117.6 N?
I thought about it. Show me
No, it's 60 N. Static friction only gets as big as needed. With 60 N of push and no acceleration, the first law says friction must be exactly 60 N backward. $\mu_s F_N = 117.6$ N is the most it could be, not what it is.
Will it slide?
A 30 kg cabinet sits on a level floor with $\mu_s = 0.40$ and $\mu_k = 0.25$. Find the friction force and the cabinet's acceleration when you push horizontally with (a) 90 N and (b) 130 N.
$F_N$$F_g$$F_{push}$$f_k$
  1. Vertical: $F_N = mg = (30)(9.8) = 294$ N. Maximum static friction: $\mu_s F_N = (0.40)(294) = 117.6$ N.
    Why?
    Always find the threshold first. It tells you whether the object slides.
  2. (a) 90 N is less than 117.6 N, so the cabinet stays put. Static friction is 90 N backward, and $a = 0$.
    Why?
    Static friction matches the push exactly. Using 117.6 N here is the classic mistake: it would give a backward acceleration from rest, which is impossible.
  3. (b) 130 N is more than 117.6 N, so it slides. Now kinetic friction: $f_k = \mu_k F_N = (0.25)(294) = 73.5$ N.
  4. $a = \frac{130 - 73.5}{30} = 1.88\ \text{m/s}^2$ in the direction of the push.
    Why?
    Once sliding, only μk matters, even though you needed more than 117.6 N to get it started.

Answer: (a) Friction 90 N, no motion. (b) Friction 73.5 N, $a \approx 1.9\ \text{m/s}^2$.

Stuck? Get a hint
  1. First compute $\mu_s F_N$. Is the push above or below it?
  2. Below the threshold, static friction equals the push. Above it, use μk $F_N$.
  3. $a = \frac{F_{push} - f_k}{m}$.

Static friction is also what makes walking and driving possible. When you walk, your shoe pushes back on the ground, and static friction from the ground pushes you forward. The shoe doesn't slip, so it's static. A car's tires do the same thing: the fastest a car can stop or speed up without skidding is when static friction is at its maximum, $a_{max} = \frac{\mu_s mg}{m} = \mu_s g$ on level ground. Notice the mass cancels.

?Wait, does friction always point backward?
It points opposite to the sliding (or the tendency to slide) of the two surfaces against each other, not opposite to "the motion" in general. When you walk forward, your foot tends to slip backward, so friction on your foot points forward. On a box riding in an accelerating truck, static friction points forward too: it's what speeds the box up.
Check yourself
A book is pressed against a vertical wall by a horizontal push and stays at rest. Which force balances the book's weight?
  1. AThe normal force from the wall
  2. BThe horizontal push
  3. CStatic friction from the wall, pointing up
  4. DKinetic friction from the wall, pointing up
Show the answer

C. The weight is vertical, so a vertical force must balance it. The push and the normal force are horizontal. The book is not sliding, so it is static friction, pointing up. Pushing harder raises the maximum static friction but not the actual friction, which stays equal to the weight.

Exam tip from Mr. T

On friction questions, write which kind you're using and why: "The block does not slide, so friction is static and $f_s \le \mu_s F_N$" or "The block slides, so $f_k = \mu_k F_N$." That one sentence is often a scoring point on justifications.

  • Kinetic (sliding): $f_k = \mu_k F_N$, opposite the sliding.
  • Static (not sliding): whatever is needed, up to $\mu_s F_N$. Use $\mu_s F_N$ only to test whether it slides.
  • Usually μs > μk: starting is harder than keeping it going.
  • Find $F_N$ from the perpendicular equation first. It is not always mg.
  • Static friction can point forward: it is what drives walking, driving and objects riding in accelerating vehicles.