AP Physics 1 · Unit 2 lecture · Part 5 of 11 · 12 min

2.5 Newton's second lawThe equation behind every force problem

Mr. Thompkins
This is where it all comes together. Systems, free-body diagrams, net force: now we turn them into numbers. And I'll give you a five-step routine that cracks elevators, pulleys and connected blocks with the same moves every time.

Newton's second law: the acceleration of a system equals the net external force on it divided by its mass, $\vec a_{sys} = \frac{\Sigma\vec F}{m_{sys}}$. You may know it as $\Sigma F = ma$. I like the AP sheet's version because it tells the story: the forces cause the acceleration. And the acceleration always points the same way as the net force, which isn't always the way the object is moving.

?Wait, what's a newton in base units?
One newton is the net force that gives a 1 kg mass an acceleration of 1 m/s². So $1\ \text{N} = 1\ \text{kg·m/s}^2$. That's why dividing newtons by kilograms gives m/s²: the units always work out.

The routine

  1. Pick your system.
  2. Draw its free-body diagram, before any math.
  3. Pick a positive direction: the way it accelerates, if you know it.
  4. Write ΣF = ma one direction at a time, with forces from your diagram.
  5. Solve in symbols, then plug in. Check the units and whether the sign makes sense.
Run the routine
Use the pulled box from Section 2: 8.0 kg, rope at 40 N and 25° above the horizontal, $\mu_k = 0.30$. Find its acceleration. (Friction is $f_k = \mu_k F_N$; Section 7 explains it.)
$F_g$$F_N$$F_T$$f_k$
  1. System: the box. Diagram: $F_g$ down, $F_N$ up, $F_T$ at 25°, $f_k$ backward. Positive: right (it speeds up to the right) and up.
    Why?
    Steps 1 to 3 of the routine. Doing them in writing earns points and prevents sign errors.
  2. Vertical, no acceleration: $F_N + F_T\sin 25° - mg = 0$, so $F_N = (8.0)(9.8) - 40\sin 25° = 78.4 - 16.9 = 61.5$ N.
    Why?
    The box does not leave the floor or sink into it, so $a_y$ = 0. The rope's upward pull reduces the normal force.
  3. Friction: $f_k = \mu_k F_N = (0.30)(61.5) = 18.4$ N.
    Why?
    Friction depends on the normal force, so you need the vertical equation first.
  4. Horizontal: $F_T\cos 25° - f_k = ma$, so $a = \frac{36.3 - 18.4}{8.0} = 2.23\ \text{m/s}^2$.
    Why?
    Positive answer, as expected: the box speeds up in the direction we chose as positive.

Answer: About 2.2 m/s² in the direction of the pull.

Stuck? Get a hint
  1. Do the vertical direction first: the normal force is not mg here.
  2. $F_N = mg - F_T\sin 25°$, then $f_k = 0.30 F_N$.
  3. $a = \frac{F_T\cos 25° - f_k}{m}$.

Now the classic: an elevator. A scale doesn't measure your weight. It measures how hard it pushes up on you, the normal force. When the elevator accelerates, the normal force changes, and so does what the scale reads. That reading is called your apparent weight.

$F_N$ = 621.5 N$F_g$ = 539 N
A 55 kg rider in an elevator that speeds up going up. The normal force must be bigger than gravity to give the rider an upward acceleration.
The elevator
A 55 kg student stands on a scale in an elevator that speeds up going up at 1.5 m/s². What does the scale read?
  1. System: the student. Forces: $F_N$ up (scale), $F_g = mg = (55)(9.8) = 539$ N down. Positive: up, the way it accelerates.
  2. Second law: $F_N - mg = ma$, so $F_N = m(g + a)$.
    Why?
    Solve in symbols first. The form m(g + a) makes the prediction obvious: accelerating up, the scale reads more.
  3. $F_N = 55(9.8 + 1.5) = 55(11.3) = 621.5$ N.
    Why?
    More than 539 N, which is why your knees bend a little when an elevator starts up.

Answer: About 620 N, more than the student's 539 N weight.

Stuck? Get a hint
  1. The scale reads the normal force, not the weight.
  2. Up forces minus down forces equals ma, with up positive.
  3. $F_N = m(g + a)$.
Pause and think
Same student, but now the elevator moves upward at a constant 3.0 m/s. What does the scale read?
I thought about it. Show me
539 N, exactly her weight. Constant velocity means $a = 0$, so the forces balance: first law. The scale only changes while the elevator speeds up or slows down. Moving fast isn't the same as accelerating.
024681012300400500600700t (s)scale reading (N)weight 539 N429 N594 N
The same student riding down: the elevator speeds up downward at 2.0 m/s² for 2 s (429 N), cruises for 4 s (539 N), then slows at 1.0 m/s² for 4 s (594 N). Each interval is a flat line at m(g + a), with up positive.

Read that graph with the sign rule from Unit 1. Going down and speeding up, the acceleration points down, so $a = -2.0$ and the scale reads $55(9.8 - 2.0) = 429$ N: you feel lighter. Going down and slowing, the acceleration points up, $a = +1.0$, so it reads $55(10.8) = 594$ N: you feel heavier, even though you're moving down.

?Wait, how did "speeding up going down" give a negative acceleration?
It's the sign rule from Unit 1. With up positive, moving down means negative velocity. Speeding up means the acceleration has the same sign as the velocity, so it's negative too. Slowing down while moving down means opposite signs: the acceleration is positive, pointing up.

Connected objects are where picking the system pays off. A 3.0 kg cart on a frictionless table is tied by a string over a light pulley to a 1.0 kg block hanging over the edge. Treat both as one system and the string tension is internal. The only external force that drives the system along the string is the hanging block's weight.

3.0 kg1.0 kg$a$$a$frictionless table
A 3.0 kg cart on a frictionless table pulled by a hanging 1.0 kg block. They move together, so they share the same size of acceleration.
$F_N$$F_g$$F_T$
The cart: the normal force balances gravity; tension pulls it toward the pulley.
$F_T$ = 7.35 N$F_g$ = 9.8 N
The hanging block: tension up, gravity down. It accelerates down, so gravity must win.
Two objects, one string
For the cart and hanging block above, find (a) the acceleration and (b) the tension in the string.
3.0 kg1.0 kg$a$$a$frictionless table
  1. (a) System: cart + block, total mass 4.0 kg. Along the string, the only external force is the block's weight, $m_2 g = (1.0)(9.8) = 9.8$ N.
    Why?
    The tension pulls the cart forward and the block backward by equal amounts, so for the whole system it cancels.
  2. $a = \frac{m_2 g}{m_1 + m_2} = \frac{9.8}{4.0} = 2.45\ \text{m/s}^2$.
  3. (b) Switch systems: just the cart. The only horizontal force on it is the tension: $F_T = m_1 a = (3.0)(2.45) = 7.35$ N.
    Why?
    Switching systems is the move. To find a force between parts, make a system where that force is external.
  4. Check with the block: $m_2 g - F_T = m_2 a$ gives $9.8 - 7.35 = 2.45 = (1.0)(2.45)$. It agrees.
    Why?
    The tension is less than the block's 9.8 N weight. If it were equal, the block could not accelerate down.

Answer: (a) 2.45 m/s². (b) 7.35 N.

Stuck? Get a hint
  1. For the acceleration, treat both objects as one 4.0 kg system.
  2. The tension is internal to that system. What external force drives it?
  3. For the tension, make the cart alone your system: $F_T$ = m₁a.
Check yourself
In the cart-and-block setup, a student says the string tension equals the hanging block's weight, 9.8 N. What is wrong with that claim?
  1. ANothing; the string transmits the full weight.
  2. BIf the tension equaled the weight, the net force on the hanging block would be zero and it could not accelerate.
  3. CThe tension must be bigger than the weight to pull the cart.
  4. DThe tension depends on the pulley's size, not the masses.
Show the answer

B. The block accelerates downward, so the downward force (its weight) must be larger than the upward tension. Tension equals the weight only if the block hangs at rest or moves at constant velocity.

Exam tip from Mr. T

On "derive" questions with connected objects, write one second-law equation for each object (or one for the system and one for a single object), then solve together. State which system each equation is for. Graders award a point for each correct equation, even if your algebra slips later.

  • $\vec a_{sys} = \frac{\Sigma\vec F}{m_{sys}}$. The acceleration points along the net force.
  • Routine: system, diagram, positive direction (the way it accelerates), ΣF = ma per direction, solve and check.
  • A scale reads the normal force: $F_N = m(g + a)$ with up positive. It changes only while accelerating.
  • Connected objects: use the whole system for the acceleration, then a single object for the force between them.