AP Physics 1 · Unit 2 lecture · Part 4 of 11 · 9 min

2.4 Newton's first lawZero net force, constant velocity

Mr. Thompkins
Here's an idea that took humanity about two thousand years to get right: things don't need a force to keep moving. They need a force to change how they move. Once that clicks, half the "why" questions in this unit get easy.

Newton's first law: if the net force on an object is zero, its velocity stays constant. If it's at rest, it stays at rest. If it's moving, it keeps moving in a straight line at the same speed. The tendency of an object to keep its velocity is called inertia, and mass is the measure of it: the more mass, the harder it is to change the object's velocity.

The other direction is just as important. If an object has constant velocity (including zero), you know the net force on it is zero, so the forces must balance in every direction. That state is called translational equilibrium. A hockey puck gliding on frictionless ice, a skydiver falling at a steady terminal speed, a car on cruise control on a flat road: all have zero net force.

?Wait, what counts as "constant velocity"?
Constant speed AND constant direction. An object at rest has constant velocity (zero). A car going around a curve at a steady 20 m/s does not, because its direction changes, so it does have a net force. You'll see that in Section 10.
Pause and think
A skydiver falls at a constant 55 m/s. Compare the upward drag force from the air with her weight.
I thought about it. Show me
They're equal. Constant velocity means zero acceleration, so the net force is zero: drag up balances gravity down. Many students think the downward force must be bigger "because she's moving down". Motion doesn't need a net force; only changes in motion do.

Equilibrium problems are where the components skill pays off. Take a sign of weight 200 N hanging from two ropes, each at 30° above the horizontal. The sign is at rest, so the forces on it balance in both directions. By symmetry the two tensions are equal, call them $F_T$. Horizontally, the rope components $F_T\cos 30°$ cancel each other. Vertically, the two upward components must hold up the weight: $2F_T\sin 30° = 200$ N.

$F_g$ = 200 N$F_{T1}$$F_{T2}$
The hanging sign: two ropes at 30° above the horizontal and gravity. At rest, so the forces add to zero.
Equilibrium with angles
A 200 N sign hangs at rest from two ropes, each making 30° with the horizontal. Find the tension in each rope.
$F_g$ = 200 N$F_{T1}$$F_{T2}$
  1. System: the sign. At rest, so $\Sigma F_x = 0$ and $\Sigma F_y = 0$.
    Why?
    First law: zero acceleration means zero net force in every direction.
  2. Horizontal: $F_{T2}\cos 30° - F_{T1}\cos 30° = 0$, so $F_{T1} = F_{T2} = F_T$.
    Why?
    Symmetric ropes pull sideways equally in opposite directions.
  3. Vertical: $F_T\sin 30° + F_T\sin 30° - 200 = 0$, so $2F_T(0.50) = 200$.
  4. $F_T = \frac{200}{2\sin 30°} = 200$ N.
    Why?
    Each rope pulls as hard as the whole weight. Surprising, because only the vertical half of each pull holds the sign up.

Answer: 200 N in each rope.

Stuck? Get a hint
  1. Write ΣF_x = 0 and ΣF_y = 0 for the sign.
  2. Only the vertical components of the ropes hold the sign up: $F_T$ sin 30° each.
  3. $2F_T\sin 30° = 200$ N.
01530456075900100200300400500600rope angle above horizontal (°)tension in each rope (N)half the weight: 100 N30°: 200 N10°: 576 N
Tension in each rope against the rope angle for the 200 N sign. The flatter the ropes, the bigger the tension: 576 N at 10°.

The graph shows why you can't pull a rope perfectly straight between two poles with a weight on it. As the ropes flatten, $\sin\theta$ shrinks, and the tension $\frac{W}{2\sin\theta}$ grows without limit. At 90° (ropes straight up) each rope holds half the weight, 100 N. That limiting case is a great check on any formula you derive.

?Wait, what are $\sin 30°$ and $\sin 90°$?
$\sin 30° = 0.50$ and $\sin 90° = 1$. As an angle above the horizontal grows from 0° to 90°, its sine grows from 0 to 1, so a steeper rope has a bigger vertical component for the same tension.
Check yourself
A crate slides across a frictionless floor at a constant 3 m/s after a push. What horizontal force is needed to keep it moving at 3 m/s?
  1. AA force equal to its weight
  2. BA force that slowly decreases
  3. CA constant 3 N force forward
  4. DNo horizontal force at all
Show the answer

D. With no friction, nothing slows the crate, so by the first law it keeps its velocity with zero net force. A forward force would make it speed up. Choice C confuses a speed of 3 m/s with a force of 3 N.

Exam tip from Mr. T

When a problem says "at rest", "constant velocity", "steady speed in a straight line" or "terminal velocity", write $\Sigma F = 0$ in each direction immediately. That's a first-law problem, and it usually means two equations and two unknowns.

  • First law: zero net force means constant velocity, and constant velocity means zero net force.
  • Inertia is the tendency to keep the same velocity. Mass measures it.
  • Motion does not require a force. Changes in motion (accelerations) do.
  • Equilibrium: ΣF_x = 0 and ΣF_y = 0. Angled ropes: split into components; flatter ropes need more tension.