AP Physics 1 · Unit 2 lecture · Part 2 of 11 · 9 min

2.2 Forces and free-body diagramsThe one drawing that unlocks the unit

Mr. Thompkins
If you learn one skill from this unit, make it this one. A free-body diagram is the first step of nearly every force question on the exam, and it's often worth its own points. Draw it right and the equations almost write themselves.

Every force is an interaction between two objects. Contact forces need touching: the normal force from a surface, tension from a rope, friction, a spring's push or pull. Field forces act at a distance: in this course that means gravity, which Earth exerts on everything near it. If you can't name the object that exerts a force, it isn't a force.

ForceSymbolExerted byDirection
Gravitational (weight)$F_g$Earth (a field force)Down, toward Earth's center
Normal$F_N$A surfacePerpendicular to the surface, pushing
Tension$F_T$A rope or stringAlong the rope, pulling
Friction$f_s$ or $f_k$A surfaceAlong the surface, against sliding
Spring$F_s$A springBack toward the spring's rest length
The forces you will draw all year. Each one is exerted by a specific object and points in a specific direction.

A free-body diagram shows one object (or one system) alone, drawn as a dot or a box, with an arrow for every force on it. Each arrow starts on the object, points the way the force acts, is labeled with a clear symbol, and has a length that roughly shows its size. That's all. No arrows for velocity, no arrows for acceleration, no forces the object exerts on other things.

?Wait, what's the difference between mass and weight?
Mass ($m$, in kilograms) is how much stuff an object has, and it's the same everywhere. Weight is the gravitational force on it, $F_g = mg$, in newtons, and it depends on where you are. A 10 kg backpack has a weight of 98 N on Earth and about 16 N on the Moon, but its mass is 10 kg in both places.
$F_g$$F_N$
A book at rest on a table: gravity down, normal force up, same length because they balance.
$F_g$$F_N$$F_T$$f_k$
A box pulled by a rope at 25° across a rough floor. The rope pulls up a little, so the normal force is shorter than gravity.

Look at the pulled box. The rope pulls up and to the right, so the arrow is drawn at that angle, not split into pieces. Components belong in your equations, not on the diagram. Notice also that the normal force is shorter than gravity: part of the rope's pull is upward, so the floor doesn't have to push as hard. That's your first warning that the normal force isn't always $mg$.

Pause and think
You throw a ball upward. While it's in the air on the way up, what forces act on it? (Ignore air resistance.)
I thought about it. Show me
Only gravity, pointing down. There's no "force of the throw": your hand stopped touching the ball the moment it left. The ball keeps moving upward because it already has upward velocity, not because a force pushes it up. (That's the first law, coming in Section 4.)

The net force, $\Sigma\vec F$, is the vector sum of every force on the object. Along a line, add forces with signs. With forces at angles, add components: all the $x$ parts together, all the $y$ parts together. If the forces in some direction balance, the net force in that direction is zero.

?Wait, how do I split a force at an angle into components?
Exactly like a velocity in Unit 1. A force $F$ at angle $\theta$ above the horizontal has components $F_x = F\cos\theta$ and $F_y = F\sin\theta$. For the 40 N rope at 25°: $F_x = 40\cos 25° = 36.3$ N and $F_y = 40\sin 25° = 16.9$ N.
Build a free-body diagram
An 8.0 kg box is pulled across a rough floor by a rope at 25° above the horizontal. Draw its free-body diagram and identify the object that exerts each force.
$F_g$$F_N$$F_T$$f_k$
  1. Start with a dot for the box. Gravity is always there: $F_g$, straight down, exerted by Earth.
    Why?
    Gravity is the one field force in this course. Start with it so you never forget it.
  2. What touches the box? The floor and the rope. The floor gives two forces: the normal force $F_N$ straight up, and kinetic friction $f_k$ backward, opposite the sliding.
    Why?
    Go around the object and ask what touches it. Each contact can give a perpendicular part (normal) and a parallel part (friction).
  3. The rope gives tension $F_T$, drawn at 25° above the horizontal, pulling away from the box.
    Why?
    A rope can only pull, and it pulls along its own length.
  4. Check lengths: $F_N$ shorter than $F_g$ (the rope helps hold the box up), and nothing else. No "force of motion", no $ma$ arrow.
    Why?
    Graders deduct points for extra forces just as for missing ones.

Answer: Four forces: $F_g$ (Earth, down), $F_N$ (floor, up, smaller than $F_g$), $f_k$ (floor, backward), $F_T$ (rope, 25° above the horizontal).

Stuck? Get a hint
  1. Gravity first: who exerts it, and which way?
  2. List everything touching the box: the floor and the rope.
  3. The floor gives a normal force and friction. The rope gives tension along the rope.
Check yourself
A puck slides to the right across rough ice, slowing down. Which set of forces belongs on its free-body diagram?
  1. AGravity down, normal up, a forward force of motion, and friction to the left
  2. BGravity down, normal up, and friction to the left
  3. CGravity down, normal up, and friction to the right
  4. DGravity down and friction to the left only
Show the answer

B. Nothing pushes the puck forward once it is sliding, so there is no forward force. Friction opposes the sliding, so it points left, and the ice also pushes up with a normal force. The "force of motion" in choice A is the most common invented force.

Exam tip from Mr. T

Free-body diagrams on the exam: arrows start on the dot, each labeled with a distinct symbol ($F_g$, $F_N$, $F_T$, $f_k$), lengths honest, no components drawn on top. If you want components for your work, draw them on a separate sketch.

  • Every force is an interaction: some object exerts it on your object. No exerting object, no force.
  • Contact forces: normal, tension, friction, spring. Field force in this course: gravity.
  • Free-body diagram: the object alone, every force as a labeled arrow starting on it, honest lengths, no components, no velocity or acceleration arrows.
  • Net force is the vector sum of all forces. Add components direction by direction.