AP Physics 1 · Unit 1 lecture · Part 4 of 10 · 10 min

1.3 Representing motionThree graphs, one motion

Mr. Thompkins
On the AP exam, motion graphs are everywhere: read one, sketch one, or turn one into another. The good news is that just two moves do all of it: slopes and areas. Learn those and you can translate between any of the three graphs.

Here's one bike ride drawn three ways. A cyclist starts from rest, speeds up steadily to 8 m/s in 4 s, cruises at 8 m/s for 6 s, then brakes to a stop in 2 s. Start with the velocity-time graph, because it's the one in the middle: its slope gives you the acceleration graph below it, and its area gives you the position graph above it.

0246810120246810t (s)v (m/s)area = 72 mslope +2slope 0slope −4
Velocity against time. The slope of each piece is the acceleration. The shaded area under the line is the displacement: 16 + 48 + 8 = 72 m.

Slope first. From 0 to 4 s the slope is $\frac{8}{4} = 2\ \text{m/s}^2$. From 4 to 10 s it's flat, so zero acceleration. From 10 to 12 s it's $\frac{0 - 8}{2} = -4\ \text{m/s}^2$. Now area. Area under a velocity-time graph is velocity times time, which is displacement. The triangle from 0 to 4 s is $\frac12(4)(8) = 16$ m, the rectangle from 4 to 10 s is $(6)(8) = 48$ m, and the last triangle is $\frac12(2)(8) = 8$ m. Total: 72 m.

?Wait, how do I find the area of a triangle and a trapezoid again?
Triangle: $\frac12 \times \text{base} \times \text{height}$. Rectangle: base times height. Trapezoid: the average of the two parallel sides times the width, $\frac12(h_1 + h_2)w$. On these graphs the base is a time and the height is a velocity, so the area comes out in meters.
024681012020406080t (s)x (m)curves upstraightlevels off
The same ride as position against time. It curves up while the cyclist speeds up, is a straight line while she cruises, and levels off as she stops at 72 m.

Now read the position graph with the slope rule. While she speeds up, the slope of $x$ versus $t$ keeps getting steeper, so the curve bends upward. While she cruises, the slope is constant, so it's a straight line. While she brakes, the slope shrinks to zero, so the curve levels off, and it's flat at the end because she's stopped. Notice the pieces join smoothly. Velocity can't jump instantly, so a real position graph never has a sharp corner. (Textbook graphs like the jogger's have corners only because they idealize quick changes.)

?Wait, why does area under a v-t graph give displacement?
For constant velocity, displacement is velocity times time, $\Delta x = v\,\Delta t$. On a v-t graph that product is the height times the width of a rectangle: its area. When the velocity changes, slice the area into thin rectangles and add them up. The units check too: (m/s) times s gives m.
024681012-6-4-2024t (s)a (m/s²)area +8 m/sarea −8 m/s
The same ride as acceleration against time. The area under this graph is the change in velocity: +8 m/s while speeding up, -8 m/s while braking.

And the acceleration graph has its own area rule: area under $a$ versus $t$ is the change in velocity. The green rectangle is $(2)(4) = +8$ m/s, the red one is $(-4)(2) = -8$ m/s. They cancel, which makes sense: she starts at rest and ends at rest.

Pause and think
On a velocity-time graph, the line dips below the time axis. What does the area between the line and the axis mean there?
I thought about it. Show me
Below the axis the velocity is negative, so that area counts as negative displacement: motion in the negative direction. Add signed areas to get the displacement. Add their sizes (all positive) to get the distance.
Areas with signs
A cart on a track has the velocity shown: $v = 6 - 2t$ (m/s), from $t = 0$ to $t = 5.0$ s. Find (a) when it turns around, (b) its displacement and (c) the distance it travels during the 5.0 s.
012345-6-4-202468t (s)v (m/s)+9 m−4 mturns around
  1. (a) It turns around where the velocity crosses zero. The line drops 2 m/s each second from 6 m/s, so it reaches zero at $t = 3.0$ s.
    Why?
    Turning around means the velocity changes sign, so it passes through zero. On a v-t graph that is where the line crosses the time axis.
  2. (b) Area above the axis (0 to 3 s): $\frac12(3)(6) = +9$ m. Area below (3 to 5 s): the velocity at 5 s is $6 - 10 = -4$ m/s, so $\frac12(2)(-4) = -4$ m. Displacement: $9 + (-4) = +5$ m.
    Why?
    Below the axis the cart moves in the negative direction, so that area is negative.
  3. (c) Distance adds sizes: $9 + 4 = 13$ m.
    Why?
    Distance never subtracts. The cart went 9 m forward and 4 m back.

Answer: (a) At 3.0 s. (b) $+5$ m. (c) 13 m.

Stuck? Get a hint
  1. Find where the line crosses v = 0. That splits the graph into two triangles.
  2. Find the velocity at 5 s to get the height of the lower triangle.
  3. Displacement: signed areas, 9 + (-4). Distance: sizes, 9 + 4.
Check yourself
A velocity-time graph is a straight line with a positive slope that starts at v = 0. What does the matching position-time graph look like?
  1. AA straight line with a positive slope
  2. BA horizontal line
  3. CA curve that gets steeper as time goes on
  4. DA curve that gets flatter as time goes on
Show the answer

C. Velocity grows steadily, and velocity is the slope of the position graph, so that slope keeps increasing: a curve bending upward. Choice A copies the shape of the velocity graph onto the position graph, the most common translation mistake.

Check yourself
On a velocity-time graph, what does the slope represent?
  1. APosition
  2. BDisplacement
  3. CAcceleration
  4. DSpeed
Show the answer

C. Slope of v against t is the change in velocity over the change in time, which is acceleration. Displacement is the area under that graph, not its slope.

Exam tip from Mr. T

Before you read any value from a graph, read the axis label. A rising line on an x-t graph means moving forward. The same line on a v-t graph means speeding up. Mixing them up is the most expensive mistake in this unit, and it's completely avoidable.

  • Slope of x vs t = velocity. Slope of v vs t = acceleration.
  • Area under v vs t = displacement (below the axis counts negative). Area under a vs t = change in velocity.
  • Constant acceleration: straight v-t line, curved (parabolic) x-t graph, flat a-t line.
  • Where v crosses zero, the object turns around and the x-t graph has a peak or a valley.