AP Physics 1 · Unit 1 lecture · Part 5 of 10 · 9 min

1.3 Representing motionThe constant-acceleration equations

Mr. Thompkins
If you've been worried that physics means memorizing a pile of formulas, here's some relief. For constant acceleration there are only three, they're on your equation sheet, and every one of them comes straight out of the velocity graph you just learned.

When the acceleration is constant, the velocity-time graph is a straight line. Let's read the equations off it. The line starts at $v_0$ and has slope $a$, so after a time $t$ the velocity is $v = v_0 + at$. That's the first one, and it's just "slope = acceleration" rearranged.

The area under that line is a rectangle of height $v_0$ and width $t$, plus a triangle of base $t$ and height $at$. So the displacement is $\Delta x = v_0 t + \frac12 at^2$. That's the second. Combine the two to get rid of $t$ and you get the third: $v^2 = v_0^2 + 2a\Delta x$. On the AP sheet they're written with $x - x_0$ for the displacement: $x = x_0 + v_{x0}t + \frac12 a_x t^2$ and $v_x^2 = v_{x0}^2 + 2a_x(x - x_0)$.

?Wait, what are $v_0$ and $x_0$?
The little zero means "at the start", when $t = 0$. So $v_0$ is the initial velocity and $x_0$ is the initial position. A problem that says "starts from rest" is telling you $v_0 = 0$.
EquationLeaves outUse it when you do not know or need
v = v₀ + atΔxthe displacement
Δx = v₀t + ½at²vthe final velocity
v² = v₀² + 2aΔxtthe time
Δx = ½(v₀ + v)tathe acceleration (handy, not on the sheet)
Each equation leaves out one quantity. Pick the one that leaves out the quantity you neither know nor need.

Here's the routine. List the five quantities: $\Delta x$, $v_0$, $v$, $a$, $t$. Write down the three you know and the one you want. The fifth is the one you don't care about, and the equation without it is your equation. Watch for hidden values: "starts from rest" means $v_0 = 0$, "comes to a stop" means $v = 0$, "dropped" means $v_0 = 0$ and $a = -g$ with up positive.

?Wait, how do I solve $v^2 = v_0^2 + 2a\Delta x$ for $a$?
Subtract $v_0^2$ from both sides, then divide by $2\Delta x$: $a = \frac{v^2 - v_0^2}{2\Delta x}$. Do the algebra in symbols first, then plug in. It keeps the arithmetic clean and earns points on derivations.
Pick the equation
A train enters a station at 24 m/s and brakes with constant acceleration, stopping in 160 m. Find (a) its acceleration and (b) how long it takes to stop.
  1. Take the direction of travel as positive. Known: $v_0 = 24$ m/s, $v = 0$, $\Delta x = 160$ m. Want: $a$. Missing: $t$.
    Why?
    "Stopping" quietly gives you $v = 0$. Listing knowns and unknowns is how you find the right equation.
  2. (a) The equation without $t$ is $v^2 = v_0^2 + 2a\Delta x$. Solve: $a = \frac{v^2 - v_0^2}{2\Delta x} = \frac{0 - 24^2}{2(160)} = \frac{-576}{320} = -1.8\ \text{m/s}^2$.
    Why?
    The minus sign means the acceleration points opposite the motion. That is exactly what braking looks like.
  3. (b) Now use $v = v_0 + at$: $0 = 24 + (-1.8)t$, so $t = \frac{24}{1.8} = 13.3$ s.
    Why?
    Check with the average velocity: it goes from 24 to 0 at a steady rate, so its average is 12 m/s, and $\frac{160\ \text{m}}{12\ \text{m/s}} = 13.3$ s. Two methods, same answer.

Answer: (a) $-1.8\ \text{m/s}^2$ (1.8 m/s² opposite the motion). (b) 13.3 s.

Stuck? Get a hint
  1. List $\Delta x$, $v_0$, $v$, $a$, $t$. Which three do you know?
  2. You are not given the time and not asked for it in part (a). Which equation has no t?
  3. $0 = 24^2 + 2a(160)$.

The AP exam loves to ask what happens when you change something. You answer those by deriving a symbolic expression first. Here's a classic: how does a car's stopping distance depend on its starting speed?

051015202530020406080starting speed (m/s)stopping distance (m)15 m/s: 18.8 m30 m/s: 75 m
Stopping distance against starting speed for a braking acceleration of 6.0 m/s². Doubling the speed from 15 to 30 m/s multiplies the distance by four: 18.8 m to 75 m.
Derive, then predict
A car moving at speed $v_0$ brakes with a constant acceleration of size $a$. (a) Derive an expression for its stopping distance $d$ in terms of $v_0$ and $a$. (b) If the car moves twice as fast, by what factor does the stopping distance change?
  1. Start from a sheet equation: $v^2 = v_0^2 + 2a_x\Delta x$. With the motion positive, $v = 0$, $a_x = -a$ and $\Delta x = d$.
    Why?
    Graders look for a fundamental equation written first, then the substitutions with a reason.
  2. $0 = v_0^2 - 2ad$, so $d = \frac{v_0^2}{2a}$.
    Why?
    Check the units: (m/s)² divided by m/s² gives meters. Good.
  3. (b) $d$ is proportional to $v_0^2$. Replace $v_0$ with $2v_0$: $d_{new} = \frac{(2v_0)^2}{2a} = 4\frac{v_0^2}{2a} = 4d$.
    Why?
    This is why speeding is so dangerous: a little more speed means a lot more stopping distance.

Answer: (a) $d = \frac{v_0^2}{2a}$. (b) It becomes 4 times as long.

Pause and think
Same car, same speed, but the road is wet and the braking acceleration is half as big. What happens to the stopping distance?
I thought about it. Show me
It doubles. In $d = \frac{v_0^2}{2a}$, the acceleration is in the denominator, so halving $a$ doubles $d$.
Check yourself
A cyclist speeds up uniformly from 2.0 m/s to 10.0 m/s over 24 m. Which equation finds her acceleration in one step?
  1. A$v = v_0 + at$
  2. B$\Delta x = v_0 t + \frac12 at^2$
  3. C$v^2 = v_0^2 + 2a\Delta x$
  4. D$\bar v = \frac{\Delta x}{\Delta t}$
Show the answer

C. You know $v_0$, $v$ and $\Delta x$ and want $a$, with no time given. Only $v^2 = v_0^2 + 2a\Delta x$ leaves out $t$: $a = \frac{100 - 4}{48} = 2.0\ \text{m/s}^2$. The first two choices each need the time.

Exam tip from Mr. T

On "derive" parts, start from an equation on the sheet, write your substitutions in symbols, and only then plug in numbers if asked. A correct number with no derivation can earn zero on a derivation part.

  • $v = v_0 + at$ (no $\Delta x$), $\Delta x = v_0 t + \frac12 at^2$ (no $v$), $v^2 = v_0^2 + 2a\Delta x$ (no $t$).
  • They work only while the acceleration is constant. Split a trip into pieces if it changes.
  • List the five quantities, mark the three you know, and use the equation without the one you do not need.
  • Hidden values: from rest means v₀ = 0; stops means v = 0.