AP Physics C: Mechanics · Unit 7 lecture · Part 10 of 10 · 9 min

Unit 7 wrap-upPut it together

Mr. Thompkins
That's the whole unit, and it really is one idea. Find the restoring force or torque, show it's proportional to the displacement, match it to $\ddot x = -\omega^2x$, and everything else follows from ω.
OscillatorRestoringEquation of motionωPeriod
Mass on a springSpring force −kxma = −kx√(k/m)2π√(m/k)
Simple pendulum, small θTorque −mgLθmL²α = −mgLθ√(g/L)2π√(L/g)
Physical pendulum, small θTorque −mgdθIα = −mgdθ√(mgd/I)2π√(I/(mgd))
Three oscillators, one equation. Each restoring force or torque is proportional to displacement (for the pendulums, after the small-angle approximation).

The recipe for any oscillation problem: (1) Displace the system from equilibrium by x or θ. (2) Write Newton's second law, linear or rotational, with the restoring force or torque. (3) Get it into the form $\ddot x = -(\text{constant})x$, using $\sin\theta \approx \theta$ if needed. (4) Read off $\omega^2$ as that constant. (5) From ω, get $T = \frac{2\pi}{\omega}$, $v_{max} = A\omega$, $a_{max} = A\omega^2$, and use $E = \tfrac12 kA^2$ for energy questions.

?Wait, what is linearization in a lab?
If a theory says $T = 2\pi\sqrt{m/k}$, a graph of T against m is a curve, which is hard to fit. Square both sides: $T^2 = \frac{4\pi^2}{k}m$. Now a graph of $T^2$ against m is a straight line through the origin with slope $\frac{4\pi^2}{k}$. Pick variables that make the theory a straight line, then use the slope.
?Wait, what does ω² stand for in each system?
It's always "restoring force (or torque) per unit displacement, divided by inertia". Spring: $\frac{k}{m}$. Simple pendulum: $\frac{mgL}{mL^2} = \frac{g}{L}$. Physical pendulum: $\frac{mgd}{I}$. Stiffer restoring means faster; more inertia means slower.
Experimental design: find k from a graph
Students hang masses from a spring and time 10 full oscillations for each, then compute $T^2$: m (kg) = 0.10, 0.20, 0.30, 0.40, 0.50 and $T^2$ (s²) = 0.17, 0.31, 0.48, 0.62, 0.80. (a) Explain why they plot $T^2$ against m. (b) The best-fit line has slope 1.57 s²/kg. Find k. (c) Why time 10 oscillations instead of one?
00.10.20.30.40.50.600.20.40.60.81m (kg)T² (s²)best fit: slope 1.57 s²/kg
  1. (a) Theory: $T^2 = \frac{4\pi^2}{k}m$. Plotting $T^2$ against m should give a straight line through the origin, and its slope is $\frac{4\pi^2}{k}$.
    Why?
    State which quantity goes on each axis and what the slope stands for. That is usually a full point.
  2. (b) $k = \frac{4\pi^2}{\text{slope}} = \frac{39.5}{1.57\ \text{s}^2/\text{kg}} = 25\ \text{N/m}$.
    Why?
    Use the slope of the best-fit line, not one data point. The line averages out the scatter.
  3. (c) Starting and stopping a stopwatch by hand has a reaction-time uncertainty of roughly 0.1 to 0.2 s. Timing 10 cycles spreads that same uncertainty over 10 periods, so the uncertainty in each period is about 10 times smaller.
  4. Beyond the course, as a bonus: the line's intercept is about 0.005 s², close to zero. A clearly positive intercept would hint that the spring's own mass is moving too and adds a little to the effective mass.

Answer: (a) It makes the theory a straight line with slope $4\pi^2/k$. (b) About 25 N/m. (c) It cuts the timing uncertainty per period by a factor of about 10.

Stuck? Get a hint
  1. Square $T = 2\pi\sqrt{m/k}$.
  2. Slope $= 4\pi^2/k$, so $k = 4\pi^2/\text{slope}$.
  3. Think about the uncertainty of pressing a stopwatch by hand.
Mixed FRQ practice: a collision starts an oscillation
A 0.45 kg block rests on a frictionless surface, attached to a spring with $k = 200\ \text{N/m}$ and sitting at equilibrium. A 0.050 kg lump of putty moving at 4.0 m/s along the spring's axis hits the block and sticks. Take t = 0 at the collision and +x in the putty's direction. (a) Find the speed just after the collision. (b) Find ω, the period and the amplitude. (c) Write x(t). (d) What fraction of the putty's kinetic energy ends up in the oscillation?
  1. (a) The collision is quick, and the spring exerts no force at equilibrium, so momentum is conserved: $(0.050)(4.0) = (0.50)v$, so $v = 0.40\ \text{m/s}$.
    Why?
    Collision first, with momentum (Unit 4). The oscillation comes after.
  2. (b) The oscillating mass is now 0.50 kg: $\omega = \sqrt{\frac{200}{0.50}} = 20\ \text{rad/s}$ and $T = \frac{2\pi}{20} = 0.31\ \text{s}$. It starts at equilibrium, so its speed there is the maximum: $A = \frac{v_{max}}{\omega} = \frac{0.40}{20} = 0.020\ \text{m}$.
    Why?
    Check with energy: $\tfrac12(0.50)(0.40)^2 = 0.040$ J and $\tfrac12(200)(0.020)^2 = 0.040$ J.
  3. (c) It starts at x = 0 moving in +x: $x(t) = 0.020\sin(20t)$, or $0.020\cos\left(20t - \frac{\pi}{2}\right)$.
  4. (d) The putty had $\tfrac12(0.050)(4.0)^2 = 0.40$ J. The oscillation has 0.040 J, so only 10% survives. The other 90% became thermal energy in the sticky collision.

Answer: (a) 0.40 m/s. (b) 20 rad/s, 0.31 s, 0.020 m. (c) $x = 0.020\sin(20t)$. (d) 10%.

Stuck? Get a hint
  1. Use momentum for the collision, not energy.
  2. After the collision, $\omega = \sqrt{k/(m + M)}$ and $A = v/\omega$ because it starts at equilibrium.
  3. Starting at x = 0 moving in +x is a sine function.
Pause and think
A pendulum clock runs on a planet with stronger gravity than Earth's. Does it run fast or slow? A mass-spring clock is taken to the same planet. Does it run fast or slow?
I thought about it. Show me
The pendulum clock runs fast: $T = 2\pi\sqrt{L/g}$, so stronger g means a shorter period, more ticks per real second. The mass-spring clock keeps the right time: $T = 2\pi\sqrt{m/k}$ has no g. (If it hangs vertically, gravity only shifts its equilibrium.)

Traps that cost points

✕ Mixing up ω and f.
✓ $\omega = 2\pi f$. ω is in rad/s, f in Hz, and $T = 2\pi/\omega = 1/f$.
✕ Thinking a bigger amplitude gives a longer period.
✓ For SHM, the period is set by the system (m and k, or L and g), not by A.
✕ Saying the net force is zero at the ends because the object stops.
✓ At the ends v = 0, but the restoring force and acceleration are largest.
✕ Using L instead of d for a physical pendulum.
✓ d is the pivot-to-center-of-mass distance, and I is about the pivot.
✕ Calculator in degrees for cos(ωt + φ).
✓ ωt + φ is in radians. Switch the calculator to radians.
✕ Assuming kinetic energy is half the total at x = A/2.
✓ It is 3/4: energy goes with x². K = U at x = A/√2.
✕ Getting φ in the wrong quadrant.
✓ Check both cos φ = x₀/A and sin φ = −v₀/(ωA), and plug t = 0 back in.
✕ Leaving out the small-angle approximation in a pendulum derivation.
✓ Say sin θ ≈ θ for small θ (in radians) before matching to the SHM equation.

Key relationships for Unit 7

$\frac{d^2x}{dt^2} = -\omega^2x$
The SHM equationShow something is SHM and read off ω
$x(t) = A\cos(\omega t + \phi)$
Its general solutionDifferentiate for v(t) and a(t)
$v_{max} = A\omega,\quad a_{max} = A\omega^2$
Largest speed and accelerationAt equilibrium and at the ends
$T = \frac{2\pi}{\omega} = \frac{1}{f}$
Period and frequencyConverting between ω, f and T
$T = 2\pi\sqrt{\frac{m}{k}}$
Mass on a springHorizontal or vertical
$T = 2\pi\sqrt{\frac{L}{g}}$
Simple pendulumSmall angles only
$T = 2\pi\sqrt{\frac{I}{mgd}}$
Physical pendulumI about the pivot, d to the center of mass
$E = \tfrac12 kA^2 = \tfrac12 mv^2 + \tfrac12 kx^2$
Energy of a spring oscillatorSpeed at any position
$v = \omega\sqrt{A^2 - x^2}$
Speed at position xNo time needed

FRQ strategy for Unit 7

  1. To show motion is SHM, write the net force or torque, get it to the form "second derivative = −(positive constant) × displacement", and name the constant as ω².
  2. For pendulums, state the small-angle approximation in words before you use it.
  3. For "write x(t)", give A, ω and φ with units, and check your function at t = 0 against the starting position and velocity.
  4. On graph questions, use slopes: v is the slope of x(t), a is the slope of v(t). Mark turning points (v = 0) and equilibrium crossings (speed max).
  5. For energy, use E = ½kA² at the ends and ½mv_max² at the middle. Remember K and U each repeat every T/2.
  6. In lab questions, linearize: plot T² against m (spring) or T² against L (pendulum), and get k or g from the slope. Time many cycles to cut timing uncertainty.
  7. Unit 7 shows up in all four free-response types, especially Experimental Design and Analysis and Translation Between Representations.
Check yourself
An object's position is $x(t) = 0.30\cos(2.0t)$ (m, s). At what time does it first pass through equilibrium, and how fast is it going then?
  1. A$t = 0.79$ s, at 0.60 m/s
  2. B$t = 1.57$ s, at 0.60 m/s
  3. C$t = 0.79$ s, at 1.2 m/s
  4. D$t = 0$, at 0.60 m/s
Show the answer

A. x = 0 first when $2.0t = \frac{\pi}{2}$, so $t = 0.785$ s, and there the speed is the maximum, $A\omega = (0.30)(2.0) = 0.60$ m/s. At 1.57 s it is at −A and at rest; 1.2 m/s is $A\omega^2$, the maximum acceleration in m/s².

Check yourself
The total energy of a mass-spring oscillator is doubled by pulling it farther before release. By what factor does its amplitude change?
  1. A2
  2. B$\sqrt2$
  3. C4
  4. D1 (no change)
Show the answer

B. $E = \tfrac12 kA^2$, so $A = \sqrt{2E/k}$: doubling E multiplies A by $\sqrt2 \approx 1.41$. Choosing 2 treats energy as proportional to A instead of A².

Mr. Thompkins
That's Unit 7, and the last unit of mechanics. Take the Unit 7 quiz now while it's fresh, and when you miss one, come back to that section and open its recall cards. Then go mix it all up with full practice exams. You've got this.